The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Maintain reel transportation system (OR Element 2)
|
|
Reel stand and rewind section is monitored and adjusted to ensure efficient continuous operation Completed |
Evidence:
|
Web control system is monitored and adjusted to ensure correct tension and accurate continuous positioning of the web for efficient operation Completed |
Evidence:
|
Substrate is added and removed to and from the process according to job specifications Completed |
Evidence:
|
Delivery is monitored and adjusted to ensure quality and efficient product delivery Completed |
Evidence:
|
Sheeting section is monitored and adjusted to ensure quality and efficient product delivery Completed |
Evidence:
|
Maintain sheet transportation system (OR Element 1)
|
|
Feeder is monitored and adjusted to ensure continuous and efficient feeding to machine Completed |
Evidence:
|
Sheet pick-up and transport system is monitored and adjusted to ensure accurate and continuous sheet handling and efficient operation Completed |
Evidence:
|
Transfer systems are monitored and adjusted to ensure correct and continuous sheet handling and efficient operation Completed |
Evidence:
|
Substrate is added and removed to and from the process according to job specifications Completed |
Evidence:
|
Maintain cutting system
|
|
Knife or die condition is monitored and adjusted to ensure the quality of product meets the standard of the approved sample Completed |
Evidence:
|
Cutting pressures are monitored and adjusted to ensure the quality of product meets the standard of the approved sample Completed |
Evidence:
|
Registration of cutting devices and knives or dies are monitored and adjusted to ensure quality of product meets the standard of the approved sample Completed |
Evidence:
|
Packing of cutting devices or dies is monitored and adjusted to ensure quality of product meets the standard of the approved sample Completed |
Evidence:
|
Maintain complex process
|
|
Registration and squareness of folds are monitored and adjusted to ensure the quality of product meets the standard of the approved sample, if relevant Completed |
Evidence:
|
Collating/inserting process is monitored and adjusted to ensure quality of product meets the standard of the approved sample, if relevant Completed |
Evidence:
|
Maintain operation of complex fastening (adhesive/mechanical/sewing) system (IF RELEVANT)
|
|
Registration of fastening is monitored and adjusted to ensure quality of product meets the standard of the approved sample Completed |
Evidence:
|
Wire straightness, length, cut-off and clinching pressures are monitored and adjusted to ensure quality of product meets the standard of the approved sample Completed |
Evidence:
|
Adhesion is monitored and adjusted to ensure quality of product meets the standard of the approved sample Completed |
Evidence:
|
Thread tension and stitch quality are monitored and adjusted to ensure quality of product meets standard of the approved sample Completed |
Evidence:
|
Maintain production process
|
|
Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule Completed |
Evidence:
|
Production is maintained according to OHS requirements, manufacturer's specifications and enterprise procedures Completed |
Evidence:
|
Manual and/or automatic control is used according to job specifications Completed |
Evidence:
|
Performance is monitored and verified using the process control system according to enterprise procedures Completed |
Evidence:
|
Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention Completed |
Evidence:
|
Process adjustments to eliminate problems are reported according to enterprise procedures Completed |
Evidence:
|
Faulty performance of equipment is identified and reported according to enterprise procedures Completed |
Evidence:
|
Waste is sorted according to enterprise procedures Completed |
Evidence:
|
Identify and rectify problems or faults
|
|
Product and substrate are monitored and tested to ensure conformance to client requirements Completed |
Evidence:
|
Problems in converting/finishing machine operation are identified and reported according to enterprise procedures Completed |
Evidence:
|
Adjustments or corrections are carried out according to specified procedures and manufacturer's specifications Completed |
Evidence:
|
Converting/finishing machine operation is checked to ensure correct operation Completed |
Evidence:
|
Conduct shutdown of production process
|
|
Correct shutdown sequence is followed according to manufacturer's specifications and enterprise procedures Completed |
Evidence:
|
Shutdown is conducted in association with fellow workers and in compliance with OHS requirements Completed |
Evidence:
|
Substrate waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures Completed |
Evidence:
|
Machine faults requiring repair are identified and reported to designated person according to enterprise procedures Completed |
Evidence:
|
Repair/adjustment is verified prior to resumption of operations Completed |
Evidence:
|
Clean converting/finishing machine at end of run
|
|
Cutting devices and knives or dies are cleaned or replaced ready for next run (IF RELEVANT) Completed |
Evidence:
|
Cutting devices are sharpened according to OHS procedures (IF RELEVANT) Completed |
Evidence:
|
Machine bed is cleaned ready for next run Completed |
Evidence:
|
All units are disengaged and cleaned ready for next run Completed |
Evidence:
|
Glue system is washed up ready for next run and liquid waste is disposed of according to regulatory requirements and enterprise procedures (IF RELEVANT) Completed |
Evidence:
|
Laminating machine is disengaged and cleaned ready for next run (IF RELEVANT) Completed |
Evidence:
|
Reel feed, transportation and delivery systems are disengaged and cleaned ready for next run OR Completed |
Evidence:
|
Sheet feed, transport and delivery systems are disengaged and cleaned ready for next run Completed |
Evidence:
|
Production records or other documentation are accurately completed where required by enterprise procedures Completed |
Evidence:
|