The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Obtain job instuctions and locate forme
|
|
Job sheets or instructions are interpreted correctly Completed |
Evidence:
|
Existing formes are located in storage area using filing system and new formes and associated tooling are collected from holding location Completed |
Evidence:
|
Check cutting forme
|
|
Cutting forme/tooling is checked against master sample for accuracy of cut and fold Completed |
Evidence:
|
Centre line is located and checked to ensure accuracy of positioning/registration on Bobst Completed |
Evidence:
|
Position and set up counters
|
|
Cutting plate is located and prepared for counters Completed |
Evidence:
|
Counters are accurately positioned and set up on cutting plate to ensure registration with cutting forme Completed |
Evidence:
|
Conduct sample cut
|
|
Material to be used for sample cut is obtained Completed |
Evidence:
|
Cutting forme and cutting plate are accurately positioned on machine Completed |
Evidence:
|
Machine is operated to produce sample according to enterprise procedures Completed |
Evidence:
|
Check sample
|
|
Sample is accurately cut and registration of tooling is precise Completed |
Evidence:
|
Forme or tooling is adjusted if necessary according to job specifications Completed |
Evidence:
|
Sample is confirmed as correct by supervisor if required Completed |
Evidence:
|
Set up stripping forme and blank separator
|
|
Pins are positioned on stripping forme to ensure accurate removal of waste board Completed |
Evidence:
|
Blank separator is set up according to job specifications Completed |
Evidence:
|
Undertake filing procedure
|
|
Correct identification number is allocated to cutting formes/tooling and strippers and recorded Completed |
Evidence:
|
Information is correctly entered into filing system according to enterprise procedures Completed |
Evidence:
|