The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Maintain operation of sheet/section transportation system
|
|
Feeder is monitored and adjusted to ensure continuous and efficient feeding to machine Completed |
Evidence:
|
Sheet/section pick-up and transport system is monitored and adjusted to ensure accurate and continuous sheet handling and efficient operation Completed |
Evidence:
|
Sheet/section transfer systems are monitored and adjusted to ensure correct and continuous sheet handling and efficient operation Completed |
Evidence:
|
Substrate is added to the process according to job specifications Completed |
Evidence:
|
Maintain operation of sheet/section delivery system
|
|
Delivery system is monitored and adjusted to ensure quality and efficient product delivery Completed |
Evidence:
|
Wire straightness, length, cut-off and clinching pressures are monitored and adjusted to ensure quality of product meets the standard of the approved sample Completed |
Evidence:
|
Adhesion is monitored and adjusted to ensure quality of product meets the standard of the approved sample Completed |
Evidence:
|
Thread tension and stitch quality are monitored and adjusted to ensure quality of product meets standard of the approved sample Completed |
Evidence:
|
Maintain production process
|
|
In-line printing/converting/binding/finishing processes are monitored and adjusted to ensure the quality of product meets the standard of the approved sample Completed |
Evidence:
|
Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule Completed |
Evidence:
|
Production is maintained according to OHS requirements, manufacturer's specifications and enterprise procedures Completed |
Evidence:
|
Manual and/or automatic control is used according to job specifications Completed |
Evidence:
|
Performance is monitored and verified using the process control system according to enterprise procedures Completed |
Evidence:
|
Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention Completed |
Evidence:
|
Waste is sorted according to enterprise procedures Completed |
Evidence:
|
Identify and rectify problems and faults
|
|
Problems in sewing fastening machine are identified and reported according to enterprise procedures Completed |
Evidence:
|
Adjustments or corrections are carried out according to specified procedures and are consistent with operator's skill level Completed |
Evidence:
|
Sewing fastening machine operation is checked to ensure correct operation Completed |
Evidence:
|
Process adjustments to eliminate problems are reported according to enterprise procedures Completed |
Evidence:
|
Faulty performance of equipment is identified and reported according to enterprise procedures Completed |
Evidence:
|
Conduct shutdown of production process
|
|
Correct shutdown sequence is followed according to manufacturer's specifications and enterprise procedures Completed |
Evidence:
|
Shutdown is conducted in association with fellow workers and in compliance with OHS requirements Completed |
Evidence:
|
Substrate waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures Completed |
Evidence:
|
Machine faults requiring repair are identified and reported to designated person according to enterprise procedures Completed |
Evidence:
|
Repair/adjustment is verified prior to resumption of operations Completed |
Evidence:
|
Clean adhesive/ mechanical/sewing fastening machine at end of run
|
|
Sewing unit is disengaged and cleaned ready for next run Completed |
Evidence:
|
Mechanical fastening unit is disengaged and cleaned ready for next run Completed |
Evidence:
|
Glue system is washed up ready for next run and liquid waste is disposed of according to regulatory requirements and enterprise procedures Completed |
Evidence:
|
In-line printing/converting/binding/finishing units are cleaned ready for next run Completed |
Evidence:
|
Sheet feed, transport and delivery systems are disengaged and cleaned ready for next run Completed |
Evidence:
|
Production records or other documentation are accurately completed where required by enterprise procedures Completed |
Evidence:
|