The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Maintain operation of reel (OR Element 2)
|
|
Reel stand and reel rewind section are monitored and adjusted to ensure efficient continuous operation and to maintain correct tension and to ensure no marks, blemishes or damage to finished product Completed |
Evidence:
|
Web control system is monitored and adjusted to ensure correct tension and accurate continuous positioning of the web for efficient operation Completed |
Evidence:
|
Substrate is added to and removed from the process according to job specifications Completed |
Evidence:
|
Maintain operation of sheet transportation system on sheet-fed machine (OR Element 1)
|
|
Feeder and delivery systems are monitored and adjusted to ensure continuous and efficient feeding to machine Completed |
Evidence:
|
Sheet pick-up, transport system and sheeting section are monitored and adjusted to ensure accurate and continuous sheet handling and an efficient operation and quality product Completed |
Evidence:
|
Transfer systems are monitored and adjusted to ensure correct and continuous sheet handling and efficient operation Completed |
Evidence:
|
Substrate is added to process according to job specifications Completed |
Evidence:
|
Maintain complex flat-bed cutting process
|
|
Knife condition is monitored and adjusted to ensure the quality of product meets the standard of the approved sample Completed |
Evidence:
|
Cutting pressures are monitored and adjusted to ensure the quality of product meets the standard of the approved sample Completed |
Evidence:
|
Registration of knife(s) is monitored and adjusted to ensure quality of product meets the standard of the approved sample Completed |
Evidence:
|
Packing of cutting devices is monitored and adjusted to ensure quality of product meets the standard of the approved sample Completed |
Evidence:
|
In-line printing/converting/binding/finishing processes are monitored and adjusted to ensure the quality of product meets the standard of the approved sample Completed |
Evidence:
|
Maintain operation of production process
|
|
Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule Completed |
Evidence:
|
Production is maintained according to OHS requirements, manufacturer's specifications and enterprise procedures Completed |
Evidence:
|
Manual and/or automatic control is used according to job specifications Completed |
Evidence:
|
Performance is monitored and verified using the process control system according to enterprise procedures Completed |
Evidence:
|
Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention Completed |
Evidence:
|
Process adjustments to eliminate problems are reported according to enterprise procedures Completed |
Evidence:
|
Faulty performance of equipment is identified and reported according to enterprise procedures Completed |
Evidence:
|
Waste is sorted according to enterprise procedures Completed |
Evidence:
|
Identify and rectify problems
|
|
Problem in cutting (flat-bed) machine operation is identified and reported according to enterprise procedures Completed |
Evidence:
|
Adjustments or corrections are carried out according to specified procedures and are consistent with operator's skill level Completed |
Evidence:
|
Cutting (flat-bed) machine operation is checked to ensure correct operation Completed |
Evidence:
|
Conduct shutdown of production process
|
|
Correct shutdown sequence is followed according to manufacturer's specifications and enterprise procedures Completed |
Evidence:
|
Shutdown is conducted in association with fellow workers and in compliance with OHS requirements Completed |
Evidence:
|
Substrate waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures Completed |
Evidence:
|
Machine faults requiring repair are identified and reported to designated person according to enterprise procedures Completed |
Evidence:
|
Repair/adjustment is verified prior to resumption of operations Completed |
Evidence:
|
Clean flat-bed cutting machine at end of run
|
|
Knife and machine bed are cleaned ready for next run Completed |
Evidence:
|
Cutting devices are sharpened correctly according to OHS requirements and enterprise procedures Completed |
Evidence:
|
Cutting machine is disengaged and cleaned ready for next run Completed |
Evidence:
|
In-line printing/converting/binding/finishing units are cleaned ready for next run Completed |
Evidence:
|
Reel feed, transportation and delivery systems are disengaged and cleaned ready for next run Completed |
Evidence:
|
Sheet feed, transport and delivery systems are disengaged and cleaned ready for next run Completed |
Evidence:
|
Production records or other documentation are accurately completed where required by enterprise procedures Completed |
Evidence:
|