The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Maintain non-routine operation of reel transportation system
|
|
Reel stand is monitored and adjusted to ensure efficient continuous operation Completed |
Evidence:
|
Web control system is monitored and adjusted to ensure correct tension and accurate continuous positioning of the web for efficient operation Completed |
Evidence:
|
Substrate is added to process according to job instructions Completed |
Evidence:
|
Maintain non-routine operation of reel delivery system on web-fed machine
|
|
Reel rewind section is monitored and adjusted to maintain correct tension and to ensure no marks, blemishes or damage to finished product Completed |
Evidence:
|
Substrate is removed from process according to non-routine job instructions Completed |
Evidence:
|
Sheeting section is monitored and adjusted to ensure quality and efficient product delivery Completed |
Evidence:
|
Set-off/marking prevention system is monitored and adjusted to ensure quality of printed product without set-off or marking meets the standard of approved proof Completed |
Evidence:
|
Maintain complex flexographic printing process
|
|
Flexographic plate and plate cylinder or sleeve condition is monitored and adjusted to ensure the quality of printed product meets the standard of the approved proof Completed |
Evidence:
|
Flexographic impression roller condition is monitored to ensure the quality of printed product meets the standard of approved proof Completed |
Evidence:
|
Flexographic inking system and doctor blade condition are monitored and adjusted to ensure quality of printed product meets the standard of approved proof Completed |
Evidence:
|
Drying systems are monitored and adjusted to ensure quality of printed product meets the standard of approved proof Completed |
Evidence:
|
In-line printing/converting/binding/finishing processes are monitored and adjusted to ensure quality of product meets the standard of the approved proof Completed |
Evidence:
|
Maintain non-routine production process
|
|
Production process is operated in association with fellow workers and according to company specifications and planned daily schedule Completed |
Evidence:
|
Production is maintained within OHS requirements and company and manufacturer's specifications Completed |
Evidence:
|
Manual and/or automatic control is used as per specification Completed |
Evidence:
|
Manual and/or automatic control is used as per specification Completed |
Evidence:
|
Ink performance, colour, register and position of print are monitored and adjusted throughout production run Completed |
Evidence:
|
Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention Completed |
Evidence:
|
Process adjustments to eliminate problems are reported according to enterprise procedures Completed |
Evidence:
|
Faulty performance of equipment is identified and reported according to enterprise procedures Completed |
Evidence:
|
Waste is sorted according to enterprise procedures Completed |
Evidence:
|
Identify and rectify faults
|
|
Problem in flexographic machine is identified and reported according to enterprise procedures Completed |
Evidence:
|
Adjustments or corrections are carried out according to specified procedures and consistent with operator's skill level Completed |
Evidence:
|
Flexographic machine operation is checked to ensure correct operation Completed |
Evidence:
|
Machine faults requiring repair are identified and reported to designated person according to enterprise procedures Completed |
Evidence:
|
Conduct shutdown of production process
|
|
Correct shutdown sequence is followed according to manufacturer's specifications and enterprise procedures Completed |
Evidence:
|
Shutdown is conducted in association with fellow workers and in compliance with OHS requirements Completed |
Evidence:
|
Reels and cores are removed from press Completed |
Evidence:
|
Unused ink is drained back to containers and correctly labelled and stored according to manufacturer/supplier specifications and enterprise procedures Completed |
Evidence:
|
Solid and liquid waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures Completed |
Evidence:
|
All product is removed from operating area Completed |
Evidence:
|
Clean and wash up printing machine at end of print run
|
|
Cylinders or sleeves, plate and roller surfaces are cleaned ready for next run Completed |
Evidence:
|
Inking rollers and doctor blades or chamber blade systems are cleaned with correct solvents according to OHS guidelines Completed |
Evidence:
|
Ink pumps, tanks and hoses are cleaned correctly Completed |
Evidence:
|
Impression rollers/central impression and press rollers are cleaned Completed |
Evidence:
|
In-line printing/converting/binding/finishing units are cleaned ready for next run Completed |
Evidence:
|
Reel feed, transportation and delivery systems are disengaged and cleaned ready for next run Completed |
Evidence:
|
Press is lubricated and protected according to duration of shutdown Completed |
Evidence:
|
Production records or other documentation are accurately completed where required by enterprise procedures Completed |
Evidence:
|