The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Maintain routine operation of delivery systems
|
|
Delivery systems are monitored and adjusted to ensure efficient and continuous operation and ensure finished product is undamaged Completed |
Evidence:
|
Substrate is added and removed from process according to job instructions Completed |
Evidence:
|
Maintain basic routine lithographic printing process
|
|
Lithographic plate and plate cylinder condition is monitored and adjusted to ensure quality of printed product meets the approved proof standard Completed |
Evidence:
|
Lithographic blanket and blanket cylinder condition is monitored and adjusted to ensure quality of printed product meets the approved proof standard Completed |
Evidence:
|
Lithographic impression cylinder condition is monitored and adjusted to ensure quality of printed product meets the approved proof standard Completed |
Evidence:
|
Lithographic inking condition is checked and maintained to ensure quality of printed product meets the approved proof standard Completed |
Evidence:
|
Lithographic dampening system condition is monitored and adjusted to ensure quality of printed product meets the approved proof standard Completed |
Evidence:
|
Maintain routine production process
|
|
Production process is operated in association with fellow workers and according to company specifications and planned daily schedule Completed |
Evidence:
|
Production is maintained within work health and safety (WHS) requirements and company and manufacturer’s specifications Completed |
Evidence:
|
Manual and/or automatic control is used as per specification Completed |
Evidence:
|
Performance is monitored and verified according to enterprise procedures Completed |
Evidence:
|
Ink performance, colour, register and position of print are monitored, adjusted and maintained throughout production run Completed |
Evidence:
|
Faulty performance of equipment is identified and reported according to enterprise procedures Completed |
Evidence:
|
Waste is sorted according to enterprise procedures Completed |
Evidence:
|
Rectify minor lithographic machine faults
|
|
Adjustments or corrections are carried out according to specified procedures and consistent with operator’s skill level Completed |
Evidence:
|
Problems with lithographic machine operation are identified and reported according to enterprise procedures Completed |
Evidence:
|
Lithographic machine operation is checked to ensure correct operation Completed |
Evidence:
|
Conduct shutdown of production process
|
|
Correct shutdown sequence is followed according to manufacturer’s specifications and enterprise procedures Completed |
Evidence:
|
Shutdown is conducted in association with fellow workers and in compliance with WHS requirements Completed |
Evidence:
|
Unused ink is correctly labelled and stored according to manufacturer/supplier specifications and enterprise procedures Completed |
Evidence:
|
Solid and liquid waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures Completed |
Evidence:
|
All product is removed from operating area Completed |
Evidence:
|
Machine faults requiring repair are identified and reported to designated person according to enterprise procedures Completed |
Evidence:
|
Repair/adjustment is verified prior to resumption of operations Completed |
Evidence:
|
Clean and wash up printing machine at end of print run
|
|
Cylinders, plate and roller surfaces are cleaned ready for next run Completed |
Evidence:
|
Inking system and dampening system are washed up ready for next run, and liquid waste is disposed of according to company and regulatory requirements Completed |
Evidence:
|
In-line printing/converting/binding/finishing units are cleaned ready for next run Completed |
Evidence:
|
Transportation and delivery systems are disengaged and cleaned ready for next run Completed |
Evidence:
|
Production records or other documentation are accurately completed where required by enterprise procedures Completed |
Evidence:
|