The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Determine the print requirements
|
|
Printed object requirements are determined against specifications and confirmed with client Completed |
Evidence:
|
Appropriate printer and materials are selected to meet client specifications Completed |
Evidence:
|
Data files are uploaded into the printer software and 3D model is checked to ensure it meets specifications Completed |
Evidence:
|
Quality of data file is assessed and possible adjustments are discussed with client Completed |
Evidence:
|
File is adjusted and saved in required printer format Completed |
Evidence:
|
Prepare the 3D printer
|
|
Print construction time is determined and client approval obtained Completed |
Evidence:
|
Personal protective equipment (PPE) is selected and fitted in accordance with work health and safety (WHS) procedures Completed |
Evidence:
|
Prestart checks are conducted on the 3D printer to ensure correct operation Completed |
Evidence:
|
Printer settings are adjusted for specified tolerances and client specifications Completed |
Evidence:
|
Printer is charged with specified construction material Completed |
Evidence:
|
2.6 Printer build platform is prepared according to manufacturer's operating procedures Completed |
Evidence:
|
Operate and monitor the 3D printer
|
|
3.1 Printer is operated in accordance with manufacturer's operating procedures and WHS procedures Completed |
Evidence:
|
Sensor displays and readings are checked so that they remain within the correct operating parameters throughout the job Completed |
Evidence:
|
Printed object is monitored to check that it is forming as per client specifications, and adjusted as necessary Completed |
Evidence:
|
Consumables are monitored and recharged as required Completed |
Evidence:
|
Errors and faults in operation are reported to relevant personnel for maintenance or repair Completed |
Evidence:
|
Remove and prepare model for client
|
|
4.1 Printed 3D object is removed from the printer bed according to manufacturer's operating procedures Completed |
Evidence:
|
4.2 Support framework is removed using appropriate tools, chemicals and PPE, according to manufacturer's operating procedures Completed |
Evidence:
|
D object is cleaned and prepared against client specifications Completed |
Evidence:
|
Finalise the shut down and reset printer
|
|
5.1 Printer is reset according to the manufacturer's operating procedures Completed |
Evidence:
|
5.2 Printer and worksite are cleaned according to organisational procedures and manufacturer's operating procedures Completed |
Evidence:
|
Printer is shut down according to organisational procedures Completed |
Evidence:
|