The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Load substrate
|
|
Substrate is checked for conformance to job specifications with any irregularities reported and/or rectified Completed |
Evidence:
|
Substrate position and stencil registration are adjusted according to job specifications Completed |
Evidence:
|
Apply ink to screen
|
|
Ink is applied to the screen in the quantity required for the screen size Completed |
Evidence:
|
Equipment is kept clean and spillage is minimised Completed |
Evidence:
|
Colour is mixed and ink is checked for conformance to job specifications Completed |
Evidence:
|
Produce proof print
|
|
Proof print is run off and checked for colour, strength, registration, adhesion, clarity, gloss level, drying/curing, artwork detail and other technical aspects according to job specifications Completed |
Evidence:
|
Adjustments are made as required Completed |
Evidence:
|
Appropriate approval to commence production is sought prior to commencement Completed |
Evidence:
|
Belt speed and energy required are set to achieve desired properties Completed |
Evidence:
|
Run job and monitor print quality
|
|
Printing speed production is adjusted to maximise quality and output Completed |
Evidence:
|
Print quality is continuously evaluated and adjusted as required Completed |
Evidence:
|
Effects of ink alterations during run are monitored and appropriate action taken according to manufacturer's/supplier's and job specifications Completed |
Evidence:
|
Workplace documentation on job is completed as required Completed |
Evidence:
|
Curing and drying are constantly monitored and adjusted according to manufacturer's/supplier's and job specifications Completed |
Evidence:
|
Carry out routine user maintenance
|
|
Equipment is lubricated, cleaned and adjusted according to manufacturer's/supplier's specifications Completed |
Evidence:
|
Fault conditions are identified and reported according to enterprise procedures Completed |
Evidence:
|
Stack production output
|
|
Output is checked for thorough drying/curing before stacking Completed |
Evidence:
|
Job status and progress are checked for conformance to job specifications and any necessary action is taken Completed |
Evidence:
|
Finish operation
|
|
Excess ink, screens, squeegees and flood coaters are removed and cleaned according to OHS requirements and manufacturer's/supplier's specifications Completed |
Evidence:
|
Waste materials are disposed of according to manufacturer's/supplier's specifications, regulatory requirements and enterprise procedures Completed |
Evidence:
|
Equipment and surrounding areas are cleaned according to manufacturer's/supplier's specifications and enterprise procedures Completed |
Evidence:
|