The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare or set up substrates (or loads)
|
|
Job sheets or equivalent instructions are interpreted correctly Completed |
Evidence:
|
Product is located, checked and prepared to meet job specifications according to established enterprise procedures and OHS procedures Completed |
Evidence:
|
Faulty material is visually identified and removed according to established enterprise procedures and OHS procedures Completed |
Evidence:
|
Set up reel systems (OR Element 3)
|
|
Unwind reel is set up and adjusted to suit job requirements Completed |
Evidence:
|
Webbing procedures are carried out according to enterprise procedures Completed |
Evidence:
|
Web-control system is set up and adjusted to suit job requirements Completed |
Evidence:
|
Reels are spliced/joined to suit job requirements Completed |
Evidence:
|
Rewind reel is set up and adjusted to suit job requirements Completed |
Evidence:
|
Folder is set up and adjusted to suit job requirements Completed |
Evidence:
|
Sheeter is set up and adjusted to suit job requirements Completed |
Evidence:
|
Readiness of transport and delivery systems is reported according to enterprise procedures for final adjustments by designated person Completed |
Evidence:
|
Set up sheet or product systems (OR Element 2)
|
|
Feeder is set up and adjusted to suit job requirements Completed |
Evidence:
|
Sheet/product pick-up and transportation system is set up and adjusted to suit job requirements Completed |
Evidence:
|
Transfer systems are set up and adjusted to suit job requirements Completed |
Evidence:
|
Delivery is set up and adjusted to suit job requirements Completed |
Evidence:
|
Product is removed from process according to job instructions Completed |
Evidence:
|
Sheet/product transfer and control system is set up and adjusted to suit job requirements Completed |
Evidence:
|
Readiness of transport and delivery systems is reported according to enterprise procedures for final adjustments by designated person, if required Completed |
Evidence:
|
Prepare machine
|
|
Machine is set up according to job instructions Completed |
Evidence:
|
Inks, glues, liquid and or other materials are loaded as required according to manufacturer's instructions and enterprise procedures Completed |
Evidence:
|
Plates, cutting or other devices are installed as required according to manufacturer's instructions and enterprise procedures Completed |
Evidence:
|
Registration, alignment or centring is confirmed according to machine manufacturer's/supplier's instructions and enterprise procedures Completed |
Evidence:
|
Machine is run through cycle at the same time ensuring that the substrate/product is positioned properly and that the process is being performed according to established workplace and OHS procedures Completed |
Evidence:
|
Readiness of machine is reported according to enterprise procedures for final adjustments and proofing by designated person, if required Completed |
Evidence:
|
Conduct shutdown of production process
|
|
Correct shutdown sequence is followed according to manufacturer's specifications and enterprise procedures Completed |
Evidence:
|
Shutdown is conducted in association with fellow workers, if required, and in compliance with OHS requirements Completed |
Evidence:
|
Unused materials are stored according to manufacturer's/supplier's specifications and enterprise procedures Completed |
Evidence:
|
Used plates, cutting and other devices are removed and stored according to manufacturer's/supplier's specifications and enterprise procedures Completed |
Evidence:
|
All product is removed from operating area according to enterprise procedures and OHS standards Completed |
Evidence:
|
Machine faults requiring repair are identified and reported to designated person according to enterprise procedures Completed |
Evidence:
|
Repair/adjustment is verified prior to resumption of operations Completed |
Evidence:
|
Clean and wash up machine at end of run
|
|
Machine sections, as relevant to process, are cleaned ready for next run Completed |
Evidence:
|
Inking/gluing/coating system, if used in process, is washed up ready for next run, and waste is disposed of according to enterprise and regulatory requirements Completed |
Evidence:
|
In-line printing/converting/binding/finishing/coating units are cleaned ready for next run Completed |
Evidence:
|
Feed, transportation and delivery systems are disengaged and cleaned ready for next run Completed |
Evidence:
|