The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for splicing
|
|
Select safety equipment to protect self and public according to industry guidelines and work health and safety (WHS) practices Completed |
Evidence:
|
Confirm layout of installation according to physical conditions at site and relevant legislation, regulations, codes and standards Completed |
Evidence:
|
Inform appropriate personnel of identified worksite hazards Completed |
Evidence:
|
Locate other services from relevant authorities according to industry guidelines and safe practices Completed |
Evidence:
|
Test for dangerous gases and place guards around open manholes according to WHS and environmental requirements Completed |
Evidence:
|
Obtain approval for alterations to design according to industry guidelines Completed |
Evidence:
|
Check existing optical fibre cable
|
|
Verify that cable is installed according to installation plan Completed |
Evidence:
|
Visually inspect cable for signs of sheath damage and seek instructions from service provider when damage is identified Completed |
Evidence:
|
Maintain minimum bend ratios according to manufacturer specifications to prevent cable damage and signal degradation Completed |
Evidence:
|
Secure cable according to safe industry practice to avoid cable and sheath damage Completed |
Evidence:
|
Splice optical fibre cable
|
|
Maintain safe work practices when using equipment to identify and verify fibre is not live before commencing splicing Completed |
Evidence:
|
Seek instructions from service provider where fibre is live and, on receipt of required enterprise certification, follow service provider instructions accordingly Completed |
Evidence:
|
Prepare cable end to expose optical fibres according to splicing method and manufacturer specifications Completed |
Evidence:
|
Prepare and splice fibres using safe industry practice according to industry specifications Completed |
Evidence:
|
Install and clean optical connectors with recommended cleaning material and re-inspect Completed |
Evidence:
|
Test completed links for proof of performance according to industry standards Completed |
Evidence:
|
Terminate optical fibre cable
|
|
Select connector unit to suit terminating frame according to design specifications Completed |
Evidence:
|
Terminate cable according to design method and manufacturer specifications Completed |
Evidence:
|
Test termination for transmission loss and light levels, and re-terminate if transmission loss exceeds industry standard Completed |
Evidence:
|
Install protection devices on connectors to protect from exposure and contaminants Completed |
Evidence:
|
Label and lay up cables in enclosure according to manufacturer instructions and industry guidelines Completed |
Evidence:
|
Finish job and report
|
|
Remove waste and reinstate site according to industry guidelines Completed |
Evidence:
|
Prepare reports, including test results and alterations to plans, according to telecommunications industry or enterprise policies Completed |
Evidence:
|
Notify appropriate personnel of work completion and obtain sign-off Completed |
Evidence:
|
Select safety equipment to protect self and public according to industry guidelines and work health and safety (WHS) practices Completed |
Evidence:
|
Confirm layout of installation according to physical conditions at site and relevant legislation, regulations, codes and standards Completed |
Evidence:
|
Inform appropriate personnel of identified worksite hazards Completed |
Evidence:
|
Locate other services from relevant authorities according to industry guidelines and safe practices Completed |
Evidence:
|
Test for dangerous gases and place guards around open manholes according to WHS and environmental requirements Completed |
Evidence:
|
Obtain approval for alterations to design according to industry guidelines Completed |
Evidence:
|