The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for commissioning procedures
|
|
Prepare for work following occupational health and safety (OHS) requirements Completed |
Evidence:
|
Organise resources based on existing and potential site hazards Completed |
Evidence:
|
Notify network operations personnel for site access and network specifications Completed |
Evidence:
|
Determine from specifications the type and complexity of the network equipment Completed |
Evidence:
|
Establish commissioning dates and confirm with all parties Completed |
Evidence:
|
Determine commissioning parameters according to specification and establish planned outage if required Completed |
Evidence:
|
Obtain test equipment and check for suitability and accuracy Completed |
Evidence:
|
Produce a preliminary commissioning plan according to manufacturer's instructions and company guidelines for discussion with the customer Completed |
Evidence:
|
Inform affectedcustomers of impending action and likely timing and impact by the work Completed |
Evidence:
|
Organise planned outages if necessary
|
|
Negotiate outage times with appropriate groups and affected customers to minimise any disruptions Completed |
Evidence:
|
Develop contingency plans if required and arrange for emergency communications Completed |
Evidence:
|
Notify alarm management centre of action planned Completed |
Evidence:
|
Obtain authority to proceed from the relevant control centre and notify customers affected by the outage Completed |
Evidence:
|
Complete installation procedures of network equipment
|
|
Install applications programmes and management data according to specification to complete installation procedures Completed |
Evidence:
|
Complete all hardware connections according to commissioning instructions Completed |
Evidence:
|
Undertake all specified performancetests to ensure operation meets all prescribed parameters and specifications as detailed in the original design brief Completed |
Evidence:
|
Undertake tests to verify compatibility between the hardware and the software Completed |
Evidence:
|
Correct performance defects or bring to the attention of designers for corrective action Completed |
Evidence:
|
Complete commissioning procedures with network management
|
|
Test alarms in conjunction with network management and operational groups to maintain network integrity Completed |
Evidence:
|
Simulate traffic tests through the new installation to emulate a live network Completed |
Evidence:
|
Test installed specific equipment features and operations administration maintenance system according to instructions Completed |
Evidence:
|
Diagnose, repair or escalate faults detected to the appropriate area when fault cannot be clearly diagnosed or repaired Completed |
Evidence:
|
Initiate vendor related tests where required Completed |
Evidence:
|
Finalise commissioning tasks
|
|
Complete administrative tasks as required by enterprise Completed |
Evidence:
|
Undertake operational staff training where required Completed |
Evidence:
|
Restore site to customers satisfaction Completed |
Evidence:
|
Notify customer and obtain sign off Completed |
Evidence:
|