The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Identify the work requirements
|
|
Purpose of the leadlight panel is established Completed |
Evidence:
|
Performance requirement of the panel is identified in terms of safety, quality and function Completed |
Evidence:
|
Construction method and materials to be used in the panel to be constructed or repaired are identified Completed |
Evidence:
|
Leadlight panel to be repaired is inspected to identify faults Completed |
Evidence:
|
Faults found are compared with customer requirements and any previous identified faults Completed |
Evidence:
|
Plan leadlight panel construction/repair
|
|
Plan or design of leadlight panel to be constructed/repaired is analysed to identify work requirements, methods and/or specifications Completed |
Evidence:
|
Workplace health and safety requirements for construction and repair of leadlight panels, including personal protection needs, are observed throughout the work Completed |
Evidence:
|
Work sequences are identified and a personal work plan is developed when required Completed |
Evidence:
|
Steps or stages in construction/repair are planned, noting check points for (any) measurements and tests Completed |
Evidence:
|
Approval of work construction plan is obtained as required by workplace procedures Completed |
Evidence:
|
Suitable work area is identified Completed |
Evidence:
|
Identify suitable materials and equipment
|
|
Tools are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition Completed |
Evidence:
|
Leadlight construction materials are selected according to specification of performance requirements, proposed use, cost and availability of materials, if required, matching the original: Completed |
Evidence:
|
texture |
|
Completed |
Evidence:
|
colour |
|
Completed |
Evidence:
|
thickness |
|
Completed |
Evidence:
|
opacity
|
|
Equipment suitable for working the chosen material is identified Completed |
Evidence:
|
Construct/repair the leadlight panel
|
|
Plan is followed to construct/repair the leadlight panel Completed |
Evidence:
|
Checks are conducted at the identified points Completed |
Evidence:
|
Modifications are identified and recommended within workplace procedures Completed |
Evidence:
|
Modifications to the plan are documented and appropriate approvals are sought in accordance with workplace procedures Completed |
Evidence:
|
Complete work
|
|
Leadlight panel is inspected for quality of work and repaired or reconstructed as required in accordance with workplace procedures Completed |
Evidence:
|
Material which can be reused is collected and stored Completed |
Evidence:
|
Waste and scrap material is removed for disposal or recycling as required Completed |
Evidence:
|
Work area is cleaned and rubbish disposed of as appropriate Completed |
Evidence:
|
Equipment is cleaned and stored according to workplace requirements Completed |
Evidence:
|
Workplace documentation is completed in accordance with workplace procedures Completed |
Evidence:
|