The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare work area
|
|
Safe working environment is established Completed |
Evidence:
|
Suitable electrical power outlets are identified, if required Completed |
Evidence:
|
Work is sequenced to maximise safety and productivity Completed |
Evidence:
|
Workplace procedures and instructions are read and interpreted Completed |
Evidence:
|
Select, use and store tools
|
|
Appropriate hand tools, power tools and electrical equipment are obtained for the work to be performed Completed |
Evidence:
|
Tools are examined for damage, missing components or other defects (including frayed power cords where applicable) Completed |
Evidence:
|
Extension power cables are checked for knots and insulation damage Completed |
Evidence:
|
Electrical tools are connected safely to power supply Completed |
Evidence:
|
Safety equipment is used during tool operation in accordance with OHS practices Completed |
Evidence:
|
Tasks are performed using tools in accordance with safe working practices Completed |
Evidence:
|
Tools are located in a safe position when not in use Completed |
Evidence:
|
Tools and extension cords are cleaned and stored in accordance with industry and enterprise safe working practices Completed |
Evidence:
|
Select adhesives and prepare for their use
|
|
Nature of materials to be joined is ascertained Completed |
Evidence:
|
Specified adhesives are obtained Completed |
Evidence:
|
Appropriate tools and materials are selected for preparation of work piece surfaces and application of adhesive Completed |
Evidence:
|
Adhesive manufacturer's OHS requirements are checked and prescribed precautions taken before adhesives are used Completed |
Evidence:
|
Adhesive is prepared to manufacturer's instructions Completed |
Evidence:
|
Apply adhesive and bond materials
|
|
Work piece surfaces are prepared for application of adhesive Completed |
Evidence:
|
Work piece surfaces to be bonded are anchored or otherwise stabilised Completed |
Evidence:
|
Adhesive is applied in accordance with recommended practice and surfaces are joined Completed |
Evidence:
|
Joins are allowed to cure for specified time Completed |
Evidence:
|
Where appropriate, heat to assist in curing the joins is applied to the work piece in accordance with OHS practices Completed |
Evidence:
|
Knowledge of using adhesives are applied to perform required tasks Completed |
Evidence:
|
Inspect and rectify
|
|
Work piece is removed and joins are informally inspected and tested for strength Completed |
Evidence:
|
Results of informal inspection are verified by supervisor and appropriate action is taken regarding rework or rectification, if necessary Completed |
Evidence:
|
Clean up and documentation
|
|
Product is prepared for inspection Completed |
Evidence:
|
Work area is cleaned and tools and equipment are cleaned and stored in accordance with OHS practices Completed |
Evidence:
|
Remaining adhesive is safely disposed of or stored in a safe, secure location Completed |
Evidence:
|
Work records are completed in accordance with workplace requirements Completed |
Evidence:
|