Operate lifting gear

1. Lifting gear is checked and prepared for operation prior to use
2. Defective lifting gear is isolated and reported according to organisational procedures
3. Loads are correctly attached using appropriate slings and rigging gear according to organisational procedures and safety requirements
4. Maximum and safe working load limits are determined and not exceeded
5. Lifting gear is safely operated to carry out operations

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Completed
Date:

Use and maintain ropes and wires

1. Knots, hitches and bends using rope are correctly made and used in the course of operations on board a vessel

Completed
Date:

Ropes are spliced neatly and securely according to their correct application and rope ends are whipped, where appropriate, to maintain good condition

Completed
Date:

Breaking strain and safe working loads of rope and wire are determined and applied as load limits in the course of operations on board a vessel

Completed
Date:

Wear and damage to rope and wire are recognised

Completed
Date:

Rope and wire are maintained and stored according to organisational procedures

1. Lifting gear is checked and prepared for operation prior to use

Completed
Date:

Defective lifting gear is isolated and reported according to organisational procedures

Completed
Date:

Loads are correctly attached using appropriate slings and rigging gear according to organisational procedures and safety requirements

Completed
Date:

Maximum and safe working load limits are determined and not exceeded

Completed
Date:

Lifting gear is safely operated to carry out operations

Completed
Date:

Secure vessel at anchor

1. Prior to letting go, anchor and equipment are prepared and crew is briefed

Completed
Date:

Quantity of anchor cable run out or recovered is appropriate to depth of water, weather and sea conditions, and tidal range in area of operation

Completed
Date:

Control of cable is maintained within safe operating limits during anchoring operations

Completed
Date:

Degree to which anchor and equipment are secured on completion of anchoring operations is appropriate to forecast conditions

Completed
Date:

Anchoring area is kept free of loose ropes, wires and debris during all operations

Completed
Date:

Secure vessel at a berth

1. Mooring lines and associated equipment are handled safely at all times

Completed
Date:

Mooring area is kept free of loose ropes, wires and debris throughout operations

Completed
Date:

Tension on ropes is maintained at an appropriate level for stage and nature of the operation

Completed
Date:

Tension on shore-power leads and other umbilicals is monitored

Completed
Date:

Check condition and seaworthiness of vessel

1. Coverage and frequency of checks and inspections on vessel seaworthiness are undertaken according to organisational procedures

Completed
Date:

Watertight integrity is checked and appropriate action is taken to prepare for prevailing and forecast weather and sea conditions according to vessel seaworthiness plans and regulatory requirements

Completed
Date:

Vessel is secured to degree which is appropriate to prevailing and forecast conditions

Completed
Date:

Irregularities are identified and appropriate action is taken to rectify the situation

Completed
Date:

Irregularities beyond ability to rectify are reported in time to enable remedial action to be taken

Completed
Date:

Reports of vessel condition are completed according to organisational procedures

Completed
Date:

Check stability of vessel

1. Information from vessel stability data book is used to determine loading limits and displacement from draft

Completed
Date:

Stability conditions for proposed nature of voyage and operations are confirmed and required stress and stability criteria are met

Completed
Date:

Perform tasks aloft and over vessel side

1. Area and equipment for working aloft or over the side are prepared according to organisational procedures

Completed
Date:

Required precautions are taken when working aloft or over the side

Completed
Date:

Chairs, safety harnesses and appropriate safety equipment are used according to organisational procedures

Completed
Date:

Portable ladders are used correctly to perform tasks

Completed
Date:

Tasks are completed safely according to instructions

Completed
Date:

Equipment is inspected, maintained and stored after use according to organisational procedures

Completed
Date:

Lash and secure stores, cargo and access ways

1. Lashing equipment is inspected, maintained and correctly stored after use according to organisational procedures

Completed
Date:

Cargo is stowed according to recognised principles and organisational procedures relating to transport and handling of dangerous goods

Completed
Date:

Cargo is lashed and secured according to recognised principles and organisational procedures

Completed
Date:

Equipment and items on deck and in galley spaces are secured according to organisational procedures

Completed
Date:

Personnel access ways are rigged and secured according to organisational procedures

Completed
Date:

Accommodation spaces and personnel facilities on board vessel are checked and correctly secured for sea according to organisational procedures

Completed
Date:

Supervise refuelling operations

1. Personal protective equipment (PPE) is accessed and used

Completed
Date:

Amount of fuel required is calculated

Completed
Date:

Instructions are provided to ensure safety boundary for refuelling process is established

Completed
Date:

Spill prevention systems are correctly deployed

Completed
Date:

Instructions are provided to ensure refuelling operations are performed safely

Completed
Date:

Notification of intention to refuel is made to authorities and other nearby operations

Completed
Date: