The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Inspect basic communication and radio navigation systems and components
|
|
Identify specific inspection requirements using maintenance documentation and modification status, including relevant system defect reports Completed |
Evidence:
|
Check isolation tags and configure aircraft for safe system inspection and operation in accordance with maintenance manual while observing all relevant work health and safety (WHS) requirements Completed |
Evidence:
|
Visually or physically check communication and radio navigation systems and components for external signs of defects in accordance with maintenance manual Completed |
Evidence:
|
Identify and report defects in accordance with standard enterprise procedures Completed |
Evidence:
|
Test or adjust basic communication and radio navigation systems and components
|
|
Prepare aircraft and system for application of power or system operation in accordance with maintenance manual Completed |
Evidence:
|
Perform functional testing on communication and radio navigation systems for evidence of serviceability or malfunction in accordance with maintenance manual Completed |
Evidence:
|
Identify and report on deficiencies in accordance with standard enterprise procedures Completed |
Evidence:
|
Troubleshoot basic communication and radio navigation systems
|
|
Use available information from maintenance documentation, inspection and test results to assist in fault determination of identified issues Completed |
Evidence:
|
Troubleshoot to line replacement level using maintenance manual fault diagnosis guides and logic processes Completed |
Evidence:
|
Obtain required specialist or supervisory advice to assist with the troubleshooting process Completed |
Evidence:
|
Locate communication and radio navigation system faults and identify and record causes of faults in required maintenance documentation in accordance with standard enterprise procedures Completed |
Evidence:
|
Remove and install basic radio communication and navigation system components
|
|
Render system safe and prepare it in accordance with maintenance manual, fitting required isolation tags, to ensure personnel safety Completed |
Evidence:
|
Remove communication and navigation system components in accordance with maintenance manual while observing all relevant WHS requirements Completed |
Evidence:
|
Complete and process required maintenance documentation relating to removal in accordance with standard enterprise procedures Completed |
Evidence:
|
Tag and pack removed components in accordance with specified procedures Completed |
Evidence:
|
Confirm correct part numbers, modification status, serviceability and shelf life of communication and navigation system components to be installed against maintenance manual Completed |
Evidence:
|
Perform physical installation of components in accordance with maintenance manual and regulatory requirements, ensuring required adjustment or alignment is carried out Completed |
Evidence:
|
Reinstate system to correct operational condition in preparation for required testing Completed |
Evidence:
|
Complete and process required maintenance documentation in relation to installation in accordance with standard enterprise procedures Completed |
Evidence:
|