The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Identify job requirements
|
|
Job requirements are correctly identified from drawings, instructions and specifications. Completed |
Evidence:
|
Material is selected appropriate to job requirements. Completed |
Evidence:
|
Determine sequence of operation
|
|
Sequence of operation including job set-up is determined for maximum efficiency and to meet job specifications. Completed |
Evidence:
|
Select inspect and prepare pattern equipment
|
|
Pattern equipment is correctly identified from specifications to standard operating procedures. Completed |
Evidence:
|
Pattern equipment is inspected to specifications, and damaged patterns are identified for repair or replacement to standard operating procedures. Completed |
Evidence:
|
Pattern is assembled to specification. Completed |
Evidence:
|
Pattern equipment is set up to specification according to standard operating procedures. Completed |
Evidence:
|
Make mould and core
|
|
Core is positioned in prints utilising chaplets and chills as required and vented to specification according to standard operating procedures. Completed |
Evidence:
|
Mould is closed and checked for compliance to component specification in accordance with standard operating procedures. Completed |
Evidence:
|
Appropriate moulding/core making equipment is selected and positioned according to standard operating procedures. Completed |
Evidence:
|
Appropriate moulding media is selected to produce mould and core to specification. Completed |
Evidence:
|
Mould is secured according to standard operating procedures. Completed |
Evidence:
|
Moulding media is used to produce mould and core according to standard operating procedures. Completed |
Evidence:
|
Pouring basin is selected or manufactured to specification and positioned in accordance with standard operating procedures. Completed |
Evidence:
|
Mould and cores are rammed up with joints and drawbacks as required to standard operating procedures. Completed |
Evidence:
|
Parting and stripping systems are utilised in accordance with standard operating procedures. Completed |
Evidence:
|
Loose pieces, vents, risers and runners are positioned and secured as required to standard operating procedures. Completed |
Evidence:
|
Pattern and loose pieces are removed from mould and core box in a safe manner least likely to cause damage to the pattern and in accordance with standard operating procedures. Completed |
Evidence:
|
Mould is inspected and repaired as required. Completed |
Evidence:
|
Mould and core is cleaned and painted according to specification using standard operating procedures. Completed |
Evidence:
|
Clean and restore work area
|
|
All materials/debris is cleared and work site cleaned and left in a safe state. Completed |
Evidence:
|
Unwanted treated sand is disposed of according to standard operating procedures and legislative and statutory requirements. Completed |
Evidence:
|