The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Determine thermal cutting job requirements
|
|
Identify thermal cutting requirements including relevant standards and codes from drawings, specifications and other customer and enterprise documentation Completed |
Evidence:
|
Check material to be cut is to specification and job requirement Completed |
Evidence:
|
Confirm NC/CNC thermal cutting machine suitability for job requirements
|
|
Identify machine features and specifications including programming language and thermal cutting capabilities Completed |
Evidence:
|
Identify machine safety features Completed |
Evidence:
|
Establish required cutting path and machine operations using drawings and cutting machine controls and software Completed |
Evidence:
|
Confirm required operations for NC/CNC thermal cutting machine Completed |
Evidence:
|
Prepare for thermal cutting programming
|
|
Check alignment of material to machine cutting head/s and datum points Completed |
Evidence:
|
Program cutting head centre point for job and check location and alignment Completed |
Evidence:
|
Calculate coordinates for cutting path Completed |
Evidence:
|
Check availability of logical subroutines and other standard instructions for position orientation Completed |
Evidence:
|
Check job for any positions or cutting paths requiring non-standard instructions Completed |
Evidence:
|
Write or record program
|
|
Write or record program in required code format for cutting path and cutting parameters using machine controller or software Completed |
Evidence:
|
Perform any additional programming required including instructions, thermal cutting recording and lower-level programming Completed |
Evidence:
|
Produce operation sheets to specification in accordance with standard operating procedures (SOPs) Completed |
Evidence:
|
Trial program on test material Completed |
Evidence:
|
Verify thermal cutting and program performance against required specifications Completed |
Evidence:
|
Edit program to adjust thermal cutting operations including using manual operation if necessary Completed |
Evidence:
|
Save final program and complete operation sheets and records according to enterprise procedures Completed |
Evidence:
|