The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Determine job requirements
|
|
Follow standard operating procedures (SOPs) Completed |
Evidence:
|
Comply with work health and safety (WHS) requirements at all times Completed |
Evidence:
|
Use appropriate personal protective equipment (PPE) in accordance with SOPs Completed |
Evidence:
|
Identify job requirements from specifications, drawings, job sheets or work instructions Completed |
Evidence:
|
Inspect fabrication and determine suitability for repair, replacement and/or modification Completed |
Evidence:
|
Assess and process material requirements
|
|
Assess material requirements in accordance with relevant codes, manufacturers’ specifications and SOPs Completed |
Evidence:
|
Obtain and/or requisition materials Completed |
Evidence:
|
Assess and obtain tool and equipment requirements in accordance with SOPs Completed |
Evidence:
|
Prepare fabrication for repair, replacement and/or modification to specification using acceptable workplace practices, tools and equipment Completed |
Evidence:
|
Mark out and prepare to specifications with minimum wastage using appropriate principles, tools and equipment Completed |
Evidence:
|
Ensure materials are cut, bent, rolled, shaped or formed to specifications using appropriate fabrication techniques/procedures, tools and equipment Completed |
Evidence:
|
Mark items for identification in accordance with SOPs Completed |
Evidence:
|
Repair, replace and/or modify fabrication
|
|
Position/clamp materials for welding using suitable clamping methods, equipment, jigs and fixtures Completed |
Evidence:
|
Undertake pre-tack checks and determine compliance with specifications prior to tack welding in position Completed |
Evidence:
|
Prepare welding equipment and adjust settings according to requirements Completed |
Evidence:
|
Tack weld material or item using appropriate distortion minimisation techniques and procedures Completed |
Evidence:
|
Check material or item against specifications prior to welding Completed |
Evidence:
|
Weld material or item to specifications using techniques and procedures appropriate to job requirements Completed |
Evidence:
|
Finish and inspect repair, replacements and/or modification
|
|
Ensure repair, replacement and/or modification is cleaned and finished to specifications using appropriate workplace practices Completed |
Evidence:
|
Inspect welds visually to assess weld quality against predetermined specifications Completed |
Evidence:
|
Assess completed repair and/or replacement for compliance against specifications Completed |
Evidence:
|
Prepare and lodge maintenance report in accordance with SOPs Completed |
Evidence:
|