The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Obtain job instructions
|
|
Job sheets or equivalent instructions are interpreted correctly and understood. Completed |
Evidence:
|
Observe safety precautions
|
|
Machine guards, coolant and dust extraction devices are checked for proper operation in accordance with standard operating procedures. Completed |
Evidence:
|
Correct safety procedures are observed, and protective clothing and safety glasses are worn. Completed |
Evidence:
|
Disassemble production tooling in preparation for sharpening
|
|
Production tooling is disassembled as required to facilitate sharpening in accordance with standard operating procedures. Completed |
Evidence:
|
Set up machine
|
|
Tool and cutter grinding wheels are selected, balanced and dressed in accordance with job instructions. Completed |
Evidence:
|
Fixtures for locating tools/cutters to be sharpened are mounted in accordance with job instructions. Completed |
Evidence:
|
Perform tool and cutter grinding
|
|
Tools and cutters to be sharpened are mounted in predetermined fixtures. Completed |
Evidence:
|
Tools and cutters are sharpened in accordance with defined procedures. Completed |
Evidence:
|
Check tools/cutters for conformance to specification
|
|
Tools/cutters are visually inspected and checked, and measured for conformance to specification in accordance with job instructions. Completed |
Evidence:
|
Assemble/reassemble production tooling
|
|
Production tooling is reassembled, and inserts are installed in accordance with job instructions. Completed |
Evidence:
|
Assembled tooling is visually inspected and checked, and measured for conformance to specification in accordance with job instructions. Completed |
Evidence:
|