The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Determine job requirements
|
|
Follow standard operating procedures (SOPs) Completed |
Evidence:
|
Comply with work health and safety (WHS) requirements at all times Completed |
Evidence:
|
Use personal protective equipment (PPE) in accordance with SOPs Completed |
Evidence:
|
Identify job requirements from specifications Completed |
Evidence:
|
Determine type of casting techniques and resources required for design Completed |
Evidence:
|
Develop work plan for production that includes clear stages and resource requirements Completed |
Evidence:
|
Determine process requirements for production of wax model Completed |
Evidence:
|
Identify required equipment and prepare for use in accordance with SOPs Completed |
Evidence:
|
Select and use tools to cut materials to required dimensions Completed |
Evidence:
|
Sculpt wax model to specifications and minimise imperfections Completed |
Evidence:
|
Apply required surface finishes based on job requirements Completed |
Evidence:
|
Select a moulding material for style of master, and prepare, pack, dry and burn out in a correct manner Completed |
Evidence:
|
Complete required wax injection of moulds using tools, materials and processes in accordance with SOPs Completed |
Evidence:
|
Vulcanise rubber in accordance with SOPs Completed |
Evidence:
|
Release master pattern using appropriate tools Completed |
Evidence:
|
Cast metals for jewellery or object designs
|
|
Select metals and alloys in appropriate proportions and weigh in correct wax-to-metal ratios Completed |
Evidence:
|
Prepare casting equipment in accordance with SOPs Completed |
Evidence:
|
Carry out required pre-heating and glazing in accordance with SOPs Completed |
Evidence:
|
Cast jewellery item or object in accordance with SOPs with respect to maintaining temperature, applying required protective coating, and handling hot molten metal Completed |
Evidence:
|
Allow for adequate solidification time based on the design Completed |
Evidence:
|
Remove cast object from the mould and store in accordance with SOPs Completed |
Evidence:
|
Clean-up work area and equipment and dispose of waste in accordance with environmental requirements Completed |
Evidence:
|