The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Determine job requirements
|
|
Follow standard operating procedures (SOPs) Completed |
Evidence:
|
Comply with work health and safety (WHS) requirements at all times Completed |
Evidence:
|
Use personal protective equipment (PPE) in accordance with standard operating procedures (SOPs) Completed |
Evidence:
|
Identify job requirements from specifications Completed |
Evidence:
|
Prepare for grain setting
|
|
Plan grain setting procedure and associated materials and equipment based on job requirements Completed |
Evidence:
|
Obtain and prepare equipment for the task Completed |
Evidence:
|
Identify materials to be used and their essential characteristics for impact on the work process Completed |
Evidence:
|
Handle gems in a manner that ensures damage is prevented Completed |
Evidence:
|
Secure the item to be set in a manner that prevents damage to the jewellery piece during the setting process Completed |
Evidence:
|
Drill and countersink the item producing a bearing to suit gem diameter Completed |
Evidence:
|
Seat the gem in the bearing opening, checking the gem is at the correct height, straight and level Completed |
Evidence:
|
Raise the grains using shaped gravers and bead the grains over to secure the gem Completed |
Evidence:
|
Form the grains into beads using a beading tool to secure the gem Completed |
Evidence:
|
Perform the final bright cutting using either a flat or onglette graver Completed |
Evidence:
|
Conduct work in accordance with environmental considerations Completed |
Evidence:
|
Remove any securing compound and clean the jewellery piece for inspection Completed |
Evidence:
|
Apply techniques for inspection and quality control of the setting work produced through a 10x magnification Completed |
Evidence:
|
Check jewellery piece against quality and client requirements and rectify any deficiencies Completed |
Evidence:
|
Complete workplace documentation in accordance with workplace procedures Completed |
Evidence:
|
Clean up and maintain production environment and equipment in accordance with SOPs Completed |
Evidence:
|