NTISthis.com

Evidence Guide: MEM20013A - Service automotive transponder systems

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MEM20013A - Service automotive transponder systems

What evidence can you provide to prove your understanding of each of the following citeria?

Identify service and repair requirements

  1. Ownership is established and verified in accordance with organisational and industry procedures.
  2. System and component specifications and other relevant information is obtained from appropriate sources and in accordance with organisational and customer requirements.
  3. Nature of damage is established in accordance with organisational procedures, established inspection / diagnostic techniques and original specifications.
  4. Service requirements and other information relevant to task are established in accordance with customer needs, organisational and manufacturer specifications and legislation, codes, regulations and standards.
Ownership is established and verified in accordance with organisational and industry procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

System and component specifications and other relevant information is obtained from appropriate sources and in accordance with organisational and customer requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Nature of damage is established in accordance with organisational procedures, established inspection / diagnostic techniques and original specifications.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service requirements and other information relevant to task are established in accordance with customer needs, organisational and manufacturer specifications and legislation, codes, regulations and standards.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service automotive transponder system

  1. Risks and hazards are identified and area is made secure.
  2. Specific isolation and/or safety measures are applied with special regard to associated equipment.
  3. OHS policies procedures and practices are applied according to organisational and legislative requirements.
  4. Tools, equipment, materials and consumables are selected, checked for serviceability and used in accordance with manufacturers' specifications and organisational procedures.
Risks and hazards are identified and area is made secure.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Specific isolation and/or safety measures are applied with special regard to associated equipment.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

OHS policies procedures and practices are applied according to organisational and legislative requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment, materials and consumables are selected, checked for serviceability and used in accordance with manufacturers' specifications and organisational procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Program transponder keys

  1. Personal limitations in programming are identified and assistance is sought from appropriate sources in accordance with organisational procedures.
  2. Programming requirements are established in accordance with organisational and supplier requirements.
  3. Keys are programmed to correct specification.
  4. System function is tested to ensure correct operation.
Personal limitations in programming are identified and assistance is sought from appropriate sources in accordance with organisational procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Programming requirements are established in accordance with organisational and supplier requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Keys are programmed to correct specification.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

System function is tested to ensure correct operation.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Finalise servicing process

  1. Documentation is completed and processed in accordance with legislative, assignment and organisational requirements.
  2. Work area, tools and equipment are cleaned and stored in accordance with OHS and organisational requirements.
  3. Vehicle is cleaned and returned to serviceable condition according to customer and organisational requirements.
Documentation is completed and processed in accordance with legislative, assignment and organisational requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area, tools and equipment are cleaned and stored in accordance with OHS and organisational requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle is cleaned and returned to serviceable condition according to customer and organisational requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to identify, analyse, encode and re-encode automotive transponder security systems Competency in this unit cannot be claimed until all prerequisites have been satisfied.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and to be capable of applying the competency in new and different situations and contexts.

Context of and specific resources for assessment

This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.

This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with servicing of automotive transponder systems, or other units requiring the exercise of the skills and knowledge covered by this unit.

Method of assessment

Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and to be capable of applying the competency in new and different situations and contexts. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate will have access to all tools, equipment, materials and documentation required. The candidate will be permitted to refer to any relevant workplace procedures, product and manufacturing specifi-cations, codes, standards, manuals and reference materials.

Guidance information for assessment

Required Skills and Knowledge

Required skills

Look for evidence that confirms skills in:

interpreting specifications, charts, manuals, diagrams and related information specific to service of automotive transponder systems

encoding and re-encoding transponder systems

confirming and clarifying information

identifying automotive locking components and associated equipment

checking functioning of locking systems

tracing faults

selecting and using appropriate tools and equipment, materials and consumables

applying safe work practices

identifying/acting on actual and potential hazards

identifying alternative servicing and repair options

disassembling and assembling components

documenting information

housekeeping

Required knowledge

Look for evidence that confirms knowledge of:

system and component specifications

sources of specifications and other relevant information for automotive transponder systems

principles of system and component function

types of transponders

technical terminology

common design problems

faults arising from vandalism, misuse, wear etc.

checks and tests to confirm service requirements

organisational procedures for establishing service requirements

procedures to establish and verify vehicle ownership

reasons for verifying ownership

operating principles, release positions and isolation techniques for air bags

operation and function of transponder and engine immobiliser systems

personal liability for safety and duty of care

applicable legislation, codes, regulations and standards

OHS policies, procedures and practices

personal protective clothing, equipment

safe working practices

environmental, physical and behavioural hazards in relation to vehicle and surrounds

factors impacting on feasibility of repair or replacement

dismantling procedures for a range of automotive locks

documentation and recording procedures

procedures for replacing worn and damaged parts, removing foreign objects and lubricating, packing and sealing components

organisational requirements for cleaning and storage

key blanks to suit model and mechanical/electronic part of lock

different types of transponder technologies

programming and operating procedures for encoder/ diagnostic machine

reasons for care and precision

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Appropriate sources of information

Catalogues, manufacturer manuals, drawings, detailed/technical sketches and associated data sheets. Computer software

Organisational requirements

Quality assurance standards and procedures, service standards, safety and OHS practices and obligations, resource storage and use, organisational processes and procedures, documentation processes, product and process training

Customer requirements

Function and capabilities, access issues, service and maintenance requirements, product operation and warranty information, costings

Service requirements

Identifying, analysing, encoding and re-encoding automotive transponder security systems

Other information

Schedules, timeframes, access and site information, products, installation and upgrade requirements, specific client requests, materials, costings, warranties and service information, legislation, codes and regulatory requirements, OHS requirements

Legislation, codes, regulations and standards

Industry licensing, industry codes of practice, privacy laws, Australian standards, quality assurance, organisational standards and practices, awards and enterprise agreements, competition, trade and consumer protection laws

Risks and hazards

Supplemental restraint systems (SRS) systems (air bags) are disabled to prevent accidental triggering. Unique dangers arising from working on the roadside. Non-compliance with manufacturer recommendations, materials handling, chemical, environmental and physical hazards

Associated equipment

SRS, electronic immobilisers, steering locking and anti-theft devices

OHS policies, procedures and practices

Assessment of actual and potential risk, identification of hazards, safety practices and regulations, safe use of tools and equipment, individual responsibilities and obligations, safety training and procedures, emergency and first aid procedures, working in confined spaces, industry standards and codes of practice

Use of personal protective equipment such as safety glasses, earmuffs/plugs, safety vests, hard hats, gloves, knee pads, safety boots, warning signs and tapes, fire extinguisher, first aid kit

Tools and equipment

Hand tools, specialist diagnostic and encoding equipment

Documentation

Historical records, procedures and measurements for opening specific vehicles, job sheets, invoices, warranties