NTISthis.com

Evidence Guide: MEM24008B - Perform ultrasonic testing

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MEM24008B - Perform ultrasonic testing

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare inspection areas for ultrasonic testing

  1. Inspection areas are identified, cleaned and prepared for testing using appropriate procedures and materials.
  2. Preparation processes are carried out in accordance with the relevant procedures, statutory and OH&S requirements.
  3. Inspection areas are visually assessed and obvious discontinuities are identified.
Inspection areas are identified, cleaned and prepared for testing using appropriate procedures and materials.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Preparation processes are carried out in accordance with the relevant procedures, statutory and OH&S requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection areas are visually assessed and obvious discontinuities are identified.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Perform ultrasonic testing

  1. The most appropriate ultrasonic test for the material/application is selected.
  2. Testing equipment is selected and prepared in accordance with standards and/or procedures.
  3. Ultrasonic test is carried out in accordance with relevant standards, specifications and OH&S requirements.
  4. Ultrasonic testing equipment is checked for defects, and maintained and stored in accordance with procedures, OH&S requirements and manufacturer instructions.
The most appropriate ultrasonic test for the material/application is selected.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Testing equipment is selected and prepared in accordance with standards and/or procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Ultrasonic test is carried out in accordance with relevant standards, specifications and OH&S requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Ultrasonic testing equipment is checked for defects, and maintained and stored in accordance with procedures, OH&S requirements and manufacturer instructions.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Interpret and report the results of ultrasonic tests

  1. Indications are assessed and defects are detected and classified in accordance with national and international codes and standards.
  2. Defects are confirmed in accordance with enterprise procedures and industry practices.
  3. Test results are reported in accordance with enterprise procedures, accepted industry practices and customer service requirements.
Indications are assessed and defects are detected and classified in accordance with national and international codes and standards.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Defects are confirmed in accordance with enterprise procedures and industry practices.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Test results are reported in accordance with enterprise procedures, accepted industry practices and customer service requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to perform ultrasonic testing. Competency in this unit cannot be claimed until all prerequisites have been satisfied.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.

Context of and specific resources for assessment

This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.

This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with operating ultrasonic testing equipment and the application of the testing procedure in a range of industrial applications, or other units requiring the exercise of the skills and knowledge covered by this unit.

Method of assessment

Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.

Guidance information for assessment

Required Skills and Knowledge

Required skills

Look for evidence that confirms skills in:

interpreting and following procedures

identifying inspection areas

identifying discontinuities and defects

selecting appropriate testing techniques, equipment and procedures

analysing test results

reading, interpreting and applying relative testing standards

reading, interpreting and applying relative conformance standards

performing calculations relating to ultrasonic testing

assessing risk

entering routine and familiar information onto proformas and standard workplace forms

Required knowledge

Look for evidence that confirms knowledge of:

cleaning and preparation processes for a variety of test surfaces

procedures and OH&S requirements in relation to the preparation process

established assessment procedures and techniques

principles of ultrasonic testing

variables affecting test selection

variables affecting test results

ultrasound - frequency, velocity, wavelength, amplitude

behaviour of ultrasound at interfaces

characteristics of ultrasound in materials

generation of ultrasound

detection of ultrasound

the flaw detector

basic test methods:

pulse-echo and transmission methods

resonance methods

a, b, c, and p scan

types of coupling

single, dual and two-probe methods

characteristics and applications associated with probes

calibration methods

variables

contact and immersion test methods

testing methods and their application

flaw size evaluation

interpretation and evaluation:

defect types as related to product

codes and standards

recording and reporting:

job records

routine reports

codes and standards

written procedures:

presentation

use of standards

types of discontinuities and their consequences

procedures for carrying out ultrasonic tests

tools, equipment, techniques and system verification checks necessary to carry out the ultrasonic test

advantages and limitations of ultrasonic testing

hazards and safety requirements associated with ultrasonic thickness testing

maintenance and storage procedures for testing equipment

range of defects

methods/procedures for reporting test results

any applicable industry standards, national/Australian standards, NOHSC guides, State/Territory regulatory codes of practice/standards

use and application of personal protective equipment

safe work practices and procedures

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Preparation processes

Surface cleaning and drying

Obvious discontinuities

Observed changes in material homogeneity

Defects

Corrosion, metal fatigue, deformation in non-ferrous/ferrous alloys steels, composite materials, fatigue cracks, stress corrosion cracking, manufacturing defects, thickness measurement and fit, mechanical and bonded repairs, laminar tearing, welding defects and casting defects and/or aircraft components

Reported

Accurate identification of location and size of discontinuities