The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Determine job requirements
|
|
Follow standard operating procedures (SOPs) Completed |
Evidence:
|
Comply with work health and safety (WHS) requirements at all times |
|
Completed |
Evidence:
|
Use appropriate personal protective equipment (PPE) in accordance with SOPs |
|
Completed |
Evidence:
|
Identify job requirements from specifications, drawings, job sheets or work instructions |
|
Completed |
Evidence:
|
Locate and identify features and purpose of external communication systems
|
|
Determine on-board methods of communication and data exchange with external source Completed |
Evidence:
|
Locate on-board electronic control module (ECMs) associated with external monitoring and control systems |
|
Completed |
Evidence:
|
Identify other external monitoring and control system hardware and components |
|
Completed |
Evidence:
|
Test external monitoring and control system
|
|
Ensure equipment is parked with engine off or in specified safe mode for testing Completed |
Evidence:
|
Check for damage to externally located antennae, sensors and other system components |
|
Completed |
Evidence:
|
Review previous records |
|
Completed |
Evidence:
|
Identify location of service ports and other test locations and connect laptop or test equipment |
|
Completed |
Evidence:
|
Run specified test procedure or program to access data on system and plant performance |
|
Completed |
Evidence:
|
Identify faults and determine if related to on-board component or ECM fault |
|
Completed |
Evidence:
|
Analyse information from tests and test equipment and identify faults |
|
Completed |
Evidence:
|
Trace on-board faults to root cause |
|
Completed |
Evidence:
|
Report off-board faults in system according to SOP’s |
|
Completed |
Evidence:
|
Rectify on-board faults
|
|
Repair or rectify faulty system components Completed |
Evidence:
|
Adjust program settings to workplace and manufacturer specifications for program related faults |
|
Completed |
Evidence:
|
Report continued program faults according to workplace procedures |
|
Completed |
Evidence:
|
Adjust, recalibrate or replace faulty sensors, aerials and antennae |
|
Completed |
Evidence:
|
Re-test system and document work
|
|
Re-test equipment external monitoring and control system to ensure compliance with specifications and workplace needs Completed |
Evidence:
|
Undertake any required final adjustments |
|
Completed |
Evidence:
|
Document work undertaken in accordance with procedures |
|
Completed |
Evidence:
|