NTISthis.com

Evidence Guide: MSFFDT4015 - Produce templates and jigs for custom-made furniture

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFFDT4015 - Produce templates and jigs for custom-made furniture

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. Applicable work health and safety (WHS), legislative and organisational requirements relevant to producing templates and jigs for custom-made furniture
  2. Instructions, plans or design briefs are read and interpreted to identify processes and materials required to complete work tasks
  3. Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
  4. Sequence of work is planned and documented, including the starting point, to ensure efficiency and quality outcomes
  5. Quality checking procedures are developed and documented for each step in the process
Applicable work health and safety (WHS), legislative and organisational requirements relevant to producing templates and jigs for custom-made furniture

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Instructions, plans or design briefs are read and interpreted to identify processes and materials required to complete work tasks

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Sequence of work is planned and documented, including the starting point, to ensure efficiency and quality outcomes

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Quality checking procedures are developed and documented for each step in the process

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Plan for the production of templates or patterns

  1. Size requirements are checked in relation to the production process and finishing capacity of the workplace
  2. Material for pattern or template is identified for approximate size and characteristics
  3. Procedures for using pattern development instruments and tools are checked and equipment is prepared for use
  4. Each dimension is measured, exploded and plotted maintaining appropriate angles, arcs and curves
  5. Visual inspection and measurements are used to compare pattern dimensions and shapes with drawings and specifications
Size requirements are checked in relation to the production process and finishing capacity of the workplace

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Material for pattern or template is identified for approximate size and characteristics

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Procedures for using pattern development instruments and tools are checked and equipment is prepared for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Each dimension is measured, exploded and plotted maintaining appropriate angles, arcs and curves

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Visual inspection and measurements are used to compare pattern dimensions and shapes with drawings and specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete templates or patterns

  1. Equipment and tools are used following normal workplace procedures
  2. Pattern or template is completed ensuring that the pattern indicates completion date and original drawing details
  3. Required workplace approval of pattern or template is obtained
  4. Plans are marked with notations for workplace requirements, including authorship, process or customer requirements, authorisation and any review dates
  5. Plans are copied and filed, as required, according to workplace policies and procedures
Equipment and tools are used following normal workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Pattern or template is completed ensuring that the pattern indicates completion date and original drawing details

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Required workplace approval of pattern or template is obtained

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Plans are marked with notations for workplace requirements, including authorship, process or customer requirements, authorisation and any review dates

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Plans are copied and filed, as required, according to workplace policies and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Design and construct jig for custom-made furniture

  1. Design of proposed jig or fixture is produced
  2. Production process incorporating jig is planned
  3. Tools and equipment are used following normal workplace procedures
  4. Jig is constructed in accordance with design and within tolerances
  5. Jig is used to produce prototype to ascertain its adherence to set tolerances and to assess its match to original design
  6. Jig is adjusted as required to meet requirements for custom-made furniture design
Design of proposed jig or fixture is produced

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Production process incorporating jig is planned

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are used following normal workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Jig is constructed in accordance with design and within tolerances

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Jig is used to produce prototype to ascertain its adherence to set tolerances and to assess its match to original design

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Jig is adjusted as required to meet requirements for custom-made furniture design

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete housekeeping

  1. Unused materials are stored or recycled as required
  2. Tools and equipment are cleaned, maintained and stored appropriately
  3. Faulty or defective equipment is tagged and reported in accordance with workplace practices
  4. Work area is cleaned and rubbish disposed of appropriately
  5. Workplace documentation is completed
Unused materials are stored or recycled as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are cleaned, maintained and stored appropriately

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faulty or defective equipment is tagged and reported in accordance with workplace practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned and rubbish disposed of appropriately

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is completed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Applicable work health and safety (WHS), legislative and organisational requirements relevant to producing templates and jigs for custom-made furniture

1.2

Instructions, plans or design briefs are read and interpreted to identify processes and materials required to complete work tasks

1.3

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition

1.4

Sequence of work is planned and documented, including the starting point, to ensure efficiency and quality outcomes

1.5

Quality checking procedures are developed and documented for each step in the process

2

Plan for the production of templates or patterns

2.1

Size requirements are checked in relation to the production process and finishing capacity of the workplace

2.2

Material for pattern or template is identified for approximate size and characteristics

2.3

Procedures for using pattern development instruments and tools are checked and equipment is prepared for use

2.4

Each dimension is measured, exploded and plotted maintaining appropriate angles, arcs and curves

2.5

Visual inspection and measurements are used to compare pattern dimensions and shapes with drawings and specifications

3

Complete templates or patterns

3.1

Equipment and tools are used following normal workplace procedures

3.2

Pattern or template is completed ensuring that the pattern indicates completion date and original drawing details

3.3

Required workplace approval of pattern or template is obtained

3.4

Plans are marked with notations for workplace requirements, including authorship, process or customer requirements, authorisation and any review dates

3.5

Plans are copied and filed, as required, according to workplace policies and procedures

4

Design and construct jig for custom-made furniture

4.1

Design of proposed jig or fixture is produced

4.2

Production process incorporating jig is planned

4.3

Tools and equipment are used following normal workplace procedures

4.4

Jig is constructed in accordance with design and within tolerances

4.5

Jig is used to produce prototype to ascertain its adherence to set tolerances and to assess its match to original design

4.6

Jig is adjusted as required to meet requirements for custom-made furniture design

5

Complete housekeeping

5.1

Unused materials are stored or recycled as required

5.2

Tools and equipment are cleaned, maintained and stored appropriately

5.3

Faulty or defective equipment is tagged and reported in accordance with workplace practices

5.4

Work area is cleaned and rubbish disposed of appropriately

5.5

Workplace documentation is completed

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Applicable work health and safety (WHS), legislative and organisational requirements relevant to producing templates and jigs for custom-made furniture

1.2

Instructions, plans or design briefs are read and interpreted to identify processes and materials required to complete work tasks

1.3

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition

1.4

Sequence of work is planned and documented, including the starting point, to ensure efficiency and quality outcomes

1.5

Quality checking procedures are developed and documented for each step in the process

2

Plan for the production of templates or patterns

2.1

Size requirements are checked in relation to the production process and finishing capacity of the workplace

2.2

Material for pattern or template is identified for approximate size and characteristics

2.3

Procedures for using pattern development instruments and tools are checked and equipment is prepared for use

2.4

Each dimension is measured, exploded and plotted maintaining appropriate angles, arcs and curves

2.5

Visual inspection and measurements are used to compare pattern dimensions and shapes with drawings and specifications

3

Complete templates or patterns

3.1

Equipment and tools are used following normal workplace procedures

3.2

Pattern or template is completed ensuring that the pattern indicates completion date and original drawing details

3.3

Required workplace approval of pattern or template is obtained

3.4

Plans are marked with notations for workplace requirements, including authorship, process or customer requirements, authorisation and any review dates

3.5

Plans are copied and filed, as required, according to workplace policies and procedures

4

Design and construct jig for custom-made furniture

4.1

Design of proposed jig or fixture is produced

4.2

Production process incorporating jig is planned

4.3

Tools and equipment are used following normal workplace procedures

4.4

Jig is constructed in accordance with design and within tolerances

4.5

Jig is used to produce prototype to ascertain its adherence to set tolerances and to assess its match to original design

4.6

Jig is adjusted as required to meet requirements for custom-made furniture design

5

Complete housekeeping

5.1

Unused materials are stored or recycled as required

5.2

Tools and equipment are cleaned, maintained and stored appropriately

5.3

Faulty or defective equipment is tagged and reported in accordance with workplace practices

5.4

Work area is cleaned and rubbish disposed of appropriately

5.5

Workplace documentation is completed

Collect, organise and understand information related to furnishing work instructions and work orders and safety procedures

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Prepare a minimum of two (2) templates and two (2) jigs for custom-made furniture

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Lead others and work effectively to improve production quality and outcomes

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Use workplace technology related to the coordination, including communication equipment, time and management aids and other measuring devices

Minimise wastage of resources, including materials, time and money

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity and encourage participation of employees in the planning of work activities and changes

State or territory WHS legislation, regulations, standards and codes of practice relevant to the production of templates and jigs

Organisational and site standards, requirements, policies and procedures for the production of templates and jigs

Types, characteristics, uses and limitations of templates and jigs

Techniques for the manufacture and application of templates and jigs

The interpretation of plan representation of furniture design

The preparation of drawings/set-outs

Types, characteristics, uses and limitations of tools and equipment and procedures for their safe use, operation and maintenance

Work flow in relation to furniture production

Environmental protection requirements

Established communication channels and protocols

Relevant problem identification and resolution

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate conceptual and analytical ability, discretion, judgement and problem solving

customers or suppliers may be internal or external

Instructions include:

workplace procedures relating to the use and operation of tools and equipment

production planning figures

workplace instructions, including:

job sheets

plans

specifications

drawings and designs

workplace procedures relating to reporting and communications

manufacturer instructions for the use of equipment and materials

Tools and equipment include:

computer numerically controlled (CNC) machines

static woodworking machines

relevant hand tools

routers

spindle moulders

panel saws

copy shapers

radial arm saws

Materials include:

manufactured board

solid timbers

composite materials

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies and practices

Information and procedures include:

work procedures/instructions

manufacturer specifications and instructions

standard forms of workplace process and procedures

organisation work specifications and requirements

legislation, regulations and codes of practice

quality and Australian Standards and procedures