NTISthis.com

Evidence Guide: MSFFF2007 - Apply stains, fillers and bleach

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFFF2007 - Apply stains, fillers and bleach

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. Workplace information, including materials application and safety information, and material safety data sheets (MSDS), is used to inform work practices
  2. Characteristics of the surface and the required surface treatment are identified from work orders or instructions
  3. Processing and application techniques, time and safety requirements are identified and used for work planning
  4. Work health and safety (WHS) requirements, including ventilation requirements and personal protection needs, are observed throughout the work
  5. Tools, equipment and accessories are identified and checked for safe and effective operation for the staining, filling or bleaching task
Workplace information, including materials application and safety information, and material safety data sheets (MSDS), is used to inform work practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Characteristics of the surface and the required surface treatment are identified from work orders or instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Processing and application techniques, time and safety requirements are identified and used for work planning

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work health and safety (WHS) requirements, including ventilation requirements and personal protection needs, are observed throughout the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and accessories are identified and checked for safe and effective operation for the staining, filling or bleaching task

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare for application of materials

  1. Surfaces are checked for contamination and correct preparation according to workplace procedures and standards
  2. Products with surface or other faults are identified and faults repaired as appropriate
  3. Materials required to stain and fill in are identified and prepared for the task
  4. Trial applications of stains and/or fillers are made to check equipment operation, materials consistency, viscosity and specified colour
  5. Faults and/or inconsistencies in colour are identified and workplace procedures for rectification and adjustment are followed
  6. Materials required for bleaching are identified and labelled to prevent cross-contamination of bulk material during application
Surfaces are checked for contamination and correct preparation according to workplace procedures and standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Products with surface or other faults are identified and faults repaired as appropriate

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials required to stain and fill in are identified and prepared for the task

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trial applications of stains and/or fillers are made to check equipment operation, materials consistency, viscosity and specified colour

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faults and/or inconsistencies in colour are identified and workplace procedures for rectification and adjustment are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials required for bleaching are identified and labelled to prevent cross-contamination of bulk material during application

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply finishing materials

  1. Techniques for application of stain, filler or bleach are identified
  2. Materials are applied according to job instructions, manufacturer specifications and workplace procedures
  3. Bleached items are appropriately stored for drying
  4. Finished products are inspected and approved for suitability for further processing
  5. Products which do not meet quality specifications are re-stained, filled, bleached or tagged for further investigation
Techniques for application of stain, filler or bleach are identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials are applied according to job instructions, manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Bleached items are appropriately stored for drying

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Finished products are inspected and approved for suitability for further processing

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Products which do not meet quality specifications are re-stained, filled, bleached or tagged for further investigation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean work area and maintain equipment

  1. Equipment used is cleaned and inspected for serviceable condition and stored appropriately
  2. Unserviceable equipment is tagged, faults are identified and appropriate personnel are informed
  3. Bleaching materials are disposed of in accordance with environmental requirements and workplace procedures
  4. Work area is cleaned and returned to approved condition, and all areas used for bleaching are washed down with water
  5. Workplace records are completed
Equipment used is cleaned and inspected for serviceable condition and stored appropriately

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unserviceable equipment is tagged, faults are identified and appropriate personnel are informed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Bleaching materials are disposed of in accordance with environmental requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned and returned to approved condition, and all areas used for bleaching are washed down with water

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace records are completed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Workplace information, including materials application and safety information, and material safety data sheets (MSDS), is used to inform work practices

1.2

Characteristics of the surface and the required surface treatment are identified from work orders or instructions

1.3

Processing and application techniques, time and safety requirements are identified and used for work planning

1.4

Work health and safety (WHS) requirements, including ventilation requirements and personal protection needs, are observed throughout the work

1.5

Tools, equipment and accessories are identified and checked for safe and effective operation for the staining, filling or bleaching task

2

Prepare for application of materials

2.1

Surfaces are checked for contamination and correct preparation according to workplace procedures and standards

2.2

Products with surface or other faults are identified and faults repaired as appropriate

2.3

Materials required to stain and fill in are identified and prepared for the task

2.4

Trial applications of stains and/or fillers are made to check equipment operation, materials consistency, viscosity and specified colour

2.5

Faults and/or inconsistencies in colour are identified and workplace procedures for rectification and adjustment are followed

2.6

Materials required for bleaching are identified and labelled to prevent cross-contamination of bulk material during application

3

Apply finishing materials

3.1

Techniques for application of stain, filler or bleach are identified

3.2

Materials are applied according to job instructions, manufacturer specifications and workplace procedures

3.3

Bleached items are appropriately stored for drying

3.4

Finished products are inspected and approved for suitability for further processing

3.5

Products which do not meet quality specifications are re-stained, filled, bleached or tagged for further investigation

4

Clean work area and maintain equipment

4.1

Equipment used is cleaned and inspected for serviceable condition and stored appropriately

4.2

Unserviceable equipment is tagged, faults are identified and appropriate personnel are informed

4.3

Bleaching materials are disposed of in accordance with environmental requirements and workplace procedures

4.4

Work area is cleaned and returned to approved condition, and all areas used for bleaching are washed down with water

4.5

Workplace records are completed

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Workplace information, including materials application and safety information, and material safety data sheets (MSDS), is used to inform work practices

1.2

Characteristics of the surface and the required surface treatment are identified from work orders or instructions

1.3

Processing and application techniques, time and safety requirements are identified and used for work planning

1.4

Work health and safety (WHS) requirements, including ventilation requirements and personal protection needs, are observed throughout the work

1.5

Tools, equipment and accessories are identified and checked for safe and effective operation for the staining, filling or bleaching task

2

Prepare for application of materials

2.1

Surfaces are checked for contamination and correct preparation according to workplace procedures and standards

2.2

Products with surface or other faults are identified and faults repaired as appropriate

2.3

Materials required to stain and fill in are identified and prepared for the task

2.4

Trial applications of stains and/or fillers are made to check equipment operation, materials consistency, viscosity and specified colour

2.5

Faults and/or inconsistencies in colour are identified and workplace procedures for rectification and adjustment are followed

2.6

Materials required for bleaching are identified and labelled to prevent cross-contamination of bulk material during application

3

Apply finishing materials

3.1

Techniques for application of stain, filler or bleach are identified

3.2

Materials are applied according to job instructions, manufacturer specifications and workplace procedures

3.3

Bleached items are appropriately stored for drying

3.4

Finished products are inspected and approved for suitability for further processing

3.5

Products which do not meet quality specifications are re-stained, filled, bleached or tagged for further investigation

4

Clean work area and maintain equipment

4.1

Equipment used is cleaned and inspected for serviceable condition and stored appropriately

4.2

Unserviceable equipment is tagged, faults are identified and appropriate personnel are informed

4.3

Bleaching materials are disposed of in accordance with environmental requirements and workplace procedures

4.4

Work area is cleaned and returned to approved condition, and all areas used for bleaching are washed down with water

4.5

Workplace records are completed

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Select appropriate stains, fillers and bleach for the surfaces to be treated

Apply stains, fillers and bleach to at least two (2) surfaces, monitor drying, and assess and rectify any quality issues

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Minimise wastage of resources, including materials, time and money

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Identification of application techniques

Characteristics of stains, fillers and bleaches in terms of toxicity, reactivity, flammability, viscosity.

Methods to prevent contamination of surfaces during and after processing

Work flow in relation to the application stains, fillers and bleach

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate some discretion, judgement and problem solving in the application of stains, fillers and bleach

Stains include:

lacquer-based wiping stain

spirit-based

water and oil-based

Fillers include:

oil-based

water-based and plastic (one-pot) filler

Bleach includes:

two-solution bleach and oxalic acid bleach

Surfaces include:

solid timber

manufactured board

Tools and equipment include:

liquid containers

rubber gloves

face masks

spray booths

spray guns

compressor

air lines

brushes

sanding block

Materials include:

water

abrasive papers

cotton rags and hessian

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies and practices

Information and procedures include:

workplace procedures relating to the use of tools and equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures