NTISthis.com

Evidence Guide: MSFFF3001 - Match and make up colours

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFFF3001 - Match and make up colours

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare work

  1. Work instructions are used to determine job requirements, including design, colour, finish process and quality
  2. Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  3. Colour matching aids and colouring materials are accessed and readied for use
  4. Types of colouring materials are identified and prepared for colouring task
  5. Tools, equipment and accessories are identified and checked for safe and effective operation
Work instructions are used to determine job requirements, including design, colour, finish process and quality

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Colour matching aids and colouring materials are accessed and readied for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Types of colouring materials are identified and prepared for colouring task

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and accessories are identified and checked for safe and effective operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Match colours

  1. Surfaces are cleaned and prepared to enable accurate colour matching
  2. Characteristics of the surface and the impact of these on colouring are taken into account
  3. Techniques for colour application are identified and selected according to workplace practices
  4. Properties of colouring agents are assessed in relation to the specific circumstances
  5. Colour matching techniques are applied to identify most likely fit in terms of product, colour and application techniques
  6. Colour matching outcomes are confirmed through trials of proposed products, colours and application techniques
  7. Colour matching formulae are recorded to enterprise or industry standards
Surfaces are cleaned and prepared to enable accurate colour matching

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Characteristics of the surface and the impact of these on colouring are taken into account

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Techniques for colour application are identified and selected according to workplace practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Properties of colouring agents are assessed in relation to the specific circumstances

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Colour matching techniques are applied to identify most likely fit in terms of product, colour and application techniques

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Colour matching outcomes are confirmed through trials of proposed products, colours and application techniques

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Colour matching formulae are recorded to enterprise or industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Make up colours

  1. Product quantities are identified from client demand or accurate assessment of coating/colouring requirement
  2. Colouring additives are calculated from manufacturer specifications
  3. Colouring additives are accurately measured and blended with the base product
Product quantities are identified from client demand or accurate assessment of coating/colouring requirement

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Colouring additives are calculated from manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Colouring additives are accurately measured and blended with the base product

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply colours

  1. Colour solution is applied in accordance with selected application techniques and workplace procedures
  2. Colour application is constantly checked against sample colour
  3. Surface is inspected for faults in applied colour film and defects are rectified
  4. Coloured or matched up surface is sealed with finishing material in accordance with job specification and workplace procedures
Colour solution is applied in accordance with selected application techniques and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Colour application is constantly checked against sample colour

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Surface is inspected for faults in applied colour film and defects are rectified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Coloured or matched up surface is sealed with finishing material in accordance with job specification and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean up work area

  1. Colouring materials are stored and labelled ready for next process
  2. Waste and unwanted material is disposed of safely and in accordance with relevant environmental regulations
  3. Unused materials are sealed and stored
  4. Tools and equipment are cleaned, maintained and stored
Colouring materials are stored and labelled ready for next process

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Waste and unwanted material is disposed of safely and in accordance with relevant environmental regulations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unused materials are sealed and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are cleaned, maintained and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan and prepare work

1.1

Work instructions are used to determine job requirements, including design, colour, finish process and quality

1.2

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

1.3

Colour matching aids and colouring materials are accessed and readied for use

1.4

Types of colouring materials are identified and prepared for colouring task

1.5

Tools, equipment and accessories are identified and checked for safe and effective operation

2

Match colours

2.1

Surfaces are cleaned and prepared to enable accurate colour matching

2.2

Characteristics of the surface and the impact of these on colouring are taken into account

2.3

Techniques for colour application are identified and selected according to workplace practices

2.4

Properties of colouring agents are assessed in relation to the specific circumstances

2.5

Colour matching techniques are applied to identify most likely fit in terms of product, colour and application techniques

2.6

Colour matching outcomes are confirmed through trials of proposed products, colours and application techniques

2.7

Colour matching formulae are recorded to enterprise or industry standards

3

Make up colours

3.1

Product quantities are identified from client demand or accurate assessment of coating/colouring requirement

3.2

Colouring additives are calculated from manufacturer specifications

3.3

Colouring additives are accurately measured and blended with the base product

4

Apply colours

4.1

Colour solution is applied in accordance with selected application techniques and workplace procedures

4.2

Colour application is constantly checked against sample colour

4.3

Surface is inspected for faults in applied colour film and defects are rectified

4.4

Coloured or matched up surface is sealed with finishing material in accordance with job specification and workplace procedures

5

Clean up work area

5.1

Colouring materials are stored and labelled ready for next process

5.2

Waste and unwanted material is disposed of safely and in accordance with relevant environmental regulations

5.3

Unused materials are sealed and stored

5.4

Tools and equipment are cleaned, maintained and stored

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan and prepare work

1.1

Work instructions are used to determine job requirements, including design, colour, finish process and quality

1.2

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

1.3

Colour matching aids and colouring materials are accessed and readied for use

1.4

Types of colouring materials are identified and prepared for colouring task

1.5

Tools, equipment and accessories are identified and checked for safe and effective operation

2

Match colours

2.1

Surfaces are cleaned and prepared to enable accurate colour matching

2.2

Characteristics of the surface and the impact of these on colouring are taken into account

2.3

Techniques for colour application are identified and selected according to workplace practices

2.4

Properties of colouring agents are assessed in relation to the specific circumstances

2.5

Colour matching techniques are applied to identify most likely fit in terms of product, colour and application techniques

2.6

Colour matching outcomes are confirmed through trials of proposed products, colours and application techniques

2.7

Colour matching formulae are recorded to enterprise or industry standards

3

Make up colours

3.1

Product quantities are identified from client demand or accurate assessment of coating/colouring requirement

3.2

Colouring additives are calculated from manufacturer specifications

3.3

Colouring additives are accurately measured and blended with the base product

4

Apply colours

4.1

Colour solution is applied in accordance with selected application techniques and workplace procedures

4.2

Colour application is constantly checked against sample colour

4.3

Surface is inspected for faults in applied colour film and defects are rectified

4.4

Coloured or matched up surface is sealed with finishing material in accordance with job specification and workplace procedures

5

Clean up work area

5.1

Colouring materials are stored and labelled ready for next process

5.2

Waste and unwanted material is disposed of safely and in accordance with relevant environmental regulations

5.3

Unused materials are sealed and stored

5.4

Tools and equipment are cleaned, maintained and stored

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Accurately colour match using pigments and/or stains on a minimum of five (5) occasions

Record colour formulae for production situations

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Minimise wastage of resources, including materials, time and money

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Types, characteristics and degradation patterns of coatings and stains

Properties of coated and stained surface materials and the impact of these on colouring

Types, characteristics, uses and limitations of colouring agents

Types, uses and limitations of matching aids

Product catalogues and other information systems

Material safety management systems and related safety requirements

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate some discretion, judgement and problem solving in the accurate matching of colours

Tools and equipment include:

mixing pots

brushes

spray equipment and mechanical mixer/vibrator

colour rubber

colour wad

Materials include:

spirit-based stains

pigments

lacquers

oil varnish

two-part polyurethane

methylated spirits

lacquer thinners

mineral turpentine and polish

Colouring agents include:

pigments

dyes

stains

universal tinters and toning lacquer

Properties of colouring agents include:

colour

specific gravity

staining power

refractive power

texture

durability

opacity

spreading power

toxicity and oil absorptive power

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies and practices

Information and procedures include:

workplace procedures relating to the use of tools and equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures