NTISthis.com

Evidence Guide: MSFFF3006 - Repair and touch up surfaces

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFFF3006 - Repair and touch up surfaces

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. Workplace information, including materials application and safety information, and material safety data sheets (MSDS), is used to inform work practices
  2. Characteristics of the surface and the required surface coating are identified from work orders or instructions
  3. Processing and application techniques, time and safety requirements are identified and used for work planning
  4. Work health and safety (WHS) requirements, including ventilation requirements and personal protection needs, are observed throughout the work
  5. Tools, equipment and accessories are identified and checked for safe and effective operation for the surface coating task
Workplace information, including materials application and safety information, and material safety data sheets (MSDS), is used to inform work practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Characteristics of the surface and the required surface coating are identified from work orders or instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Processing and application techniques, time and safety requirements are identified and used for work planning

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work health and safety (WHS) requirements, including ventilation requirements and personal protection needs, are observed throughout the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and accessories are identified and checked for safe and effective operation for the surface coating task

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair surfaces

  1. Surfaces are checked for contamination and correct preparation according to workplace procedures and standards
  2. Products with surface or other faults are identified and assessed
  3. Materials required for repair are selected and prepared
  4. Repairs are completed to manufacturer standards and/or industry practices
Surfaces are checked for contamination and correct preparation according to workplace procedures and standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Products with surface or other faults are identified and assessed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials required for repair are selected and prepared

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repairs are completed to manufacturer standards and/or industry practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare for application of materials

  1. Techniques for hand application of materials are identified and selected
  2. Coating materials required are identified and prepared for the surface coating task
  3. Trial applications of surface materials are made to check equipment operation, materials consistency and specified surface finish
  4. Faults are identified and workplace procedures for rectification are followed
Techniques for hand application of materials are identified and selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Coating materials required are identified and prepared for the surface coating task

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trial applications of surface materials are made to check equipment operation, materials consistency and specified surface finish

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faults are identified and workplace procedures for rectification are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply surface coating

  1. Surface coatings are applied according to job instructions, manufacturer specifications and workplace procedures
  2. Coated products are inspected and approved for suitability for further processing
  3. Products which do not meet quality specifications are recoated or tagged for further investigation
Surface coatings are applied according to job instructions, manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Coated products are inspected and approved for suitability for further processing

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Products which do not meet quality specifications are recoated or tagged for further investigation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean work area and maintain equipment

  1. Equipment used is cleaned and inspected for serviceable condition and stored appropriately
  2. Unserviceable equipment is tagged, faults are identified and appropriate personnel are informed
  3. Work area, including painting locations, is cleaned and returned to approved condition
  4. Workplace records are completed
Equipment used is cleaned and inspected for serviceable condition and stored appropriately

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unserviceable equipment is tagged, faults are identified and appropriate personnel are informed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area, including painting locations, is cleaned and returned to approved condition

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace records are completed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Workplace information, including materials application and safety information, and material safety data sheets (MSDS), is used to inform work practices

1.2

Characteristics of the surface and the required surface coating are identified from work orders or instructions

1.3

Processing and application techniques, time and safety requirements are identified and used for work planning

1.4

Work health and safety (WHS) requirements, including ventilation requirements and personal protection needs, are observed throughout the work

1.5

Tools, equipment and accessories are identified and checked for safe and effective operation for the surface coating task

2

Repair surfaces

2.1

Surfaces are checked for contamination and correct preparation according to workplace procedures and standards

2.2

Products with surface or other faults are identified and assessed

2.3

Materials required for repair are selected and prepared

2.4

Repairs are completed to manufacturer standards and/or industry practices

3

Prepare for application of materials

3.1

Techniques for hand application of materials are identified and selected

3.2

Coating materials required are identified and prepared for the surface coating task

3.3

Trial applications of surface materials are made to check equipment operation, materials consistency and specified surface finish

3.4

Faults are identified and workplace procedures for rectification are followed

4

Apply surface coating

4.1

Surface coatings are applied according to job instructions, manufacturer specifications and workplace procedures

4.2

Coated products are inspected and approved for suitability for further processing

4.3

Products which do not meet quality specifications are recoated or tagged for further investigation

5

Clean work area and maintain equipment

5.1

Equipment used is cleaned and inspected for serviceable condition and stored appropriately

5.2

Unserviceable equipment is tagged, faults are identified and appropriate personnel are informed

5.3

Work area, including painting locations, is cleaned and returned to approved condition

5.4

Workplace records are completed

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Workplace information, including materials application and safety information, and material safety data sheets (MSDS), is used to inform work practices

1.2

Characteristics of the surface and the required surface coating are identified from work orders or instructions

1.3

Processing and application techniques, time and safety requirements are identified and used for work planning

1.4

Work health and safety (WHS) requirements, including ventilation requirements and personal protection needs, are observed throughout the work

1.5

Tools, equipment and accessories are identified and checked for safe and effective operation for the surface coating task

2

Repair surfaces

2.1

Surfaces are checked for contamination and correct preparation according to workplace procedures and standards

2.2

Products with surface or other faults are identified and assessed

2.3

Materials required for repair are selected and prepared

2.4

Repairs are completed to manufacturer standards and/or industry practices

3

Prepare for application of materials

3.1

Techniques for hand application of materials are identified and selected

3.2

Coating materials required are identified and prepared for the surface coating task

3.3

Trial applications of surface materials are made to check equipment operation, materials consistency and specified surface finish

3.4

Faults are identified and workplace procedures for rectification are followed

4

Apply surface coating

4.1

Surface coatings are applied according to job instructions, manufacturer specifications and workplace procedures

4.2

Coated products are inspected and approved for suitability for further processing

4.3

Products which do not meet quality specifications are recoated or tagged for further investigation

5

Clean work area and maintain equipment

5.1

Equipment used is cleaned and inspected for serviceable condition and stored appropriately

5.2

Unserviceable equipment is tagged, faults are identified and appropriate personnel are informed

5.3

Work area, including painting locations, is cleaned and returned to approved condition

5.4

Workplace records are completed

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Repair and finish a minimum of four (4) damaged surfaces, including:

a strip off and re-finish

two (2) touch ups involving different repair techniques

with only one (1) being a metal surface

Maintain application equipment

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Minimise wastage of resources, including materials, time and money

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Repair and touch up techniques

Decontamination materials, techniques and safety requirements

Identification of application techniques

Characteristics of coatings and base materials in terms of toxicity, reactivity, flammability, required viscosity and recoatability

Methods to prevent contamination of surfaces during and after surface coating

Work flow in relation to the application of surface coatings

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate some discretion, judgement and problem solving in the application of surface coatings

Techniques include:

decontamination and repair

stripping

wash off

stoppings

epoxy

button lac

water putty

wax

plugs and refinishing

Surface faults include:

machine marks

bruising

pencil marks

grease

cross-sanding marks

scratches

glue marks

dirt marks

insect and termite holes

holes

knots

blisters

rubber marks

burns or tears

ropiness and foreign matter in the polish

Surfaces include:

solid timber

manufactured board

metal

Tools and equipment include:

brushes

rollers

soup rubbers

paint trays

power agitators

sanders

liquid containers

scrapers

quirk sticks

sandpapers

cotton rags

hessian

steel wool

sandpaper

abrasive papers

Materials include:

lacquers

paints

acrylics

enamels

one-pot polyurethane

methylated spirits

pigments

spirit colours

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies and practices

Information and procedures include:

workplace procedures relating to the use of tools and equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures