NTISthis.com

Evidence Guide: MSFFL3010 - Install synthetic floor coverings to sports facilities and outdoor spaces

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFFL3010 - Install synthetic floor coverings to sports facilities and outdoor spaces

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for installation

  1. Applicable work health and safety (WHS), legislative and organisational requirements relevant to the installation of synthetic textile floor coverings are verified and complied with
  2. Instructions and/or plans are read and interpreted to identify the process required to complete work tasks
  3. Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
  4. Sub-floor condition is assessed for suitability for installation
  5. Suitable adhesives, trims and accessories are selected, if required
  6. Sequence of work is planned, including the starting point, to ensure efficiency and quality of installation
Applicable work health and safety (WHS), legislative and organisational requirements relevant to the installation of synthetic textile floor coverings are verified and complied with

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Instructions and/or plans are read and interpreted to identify the process required to complete work tasks

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Sub-floor condition is assessed for suitability for installation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Suitable adhesives, trims and accessories are selected, if required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Sequence of work is planned, including the starting point, to ensure efficiency and quality of installation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set out materials

  1. Synthetic floor covering material to be installed is checked against the work order
  2. Synthetic floor covering is acclimatised according to manufacturer recommendations
  3. Soft underlays for synthetic floor coverings, where applicable, are cut and laid to specification
  4. Working lines and starting point are established
  5. Adhesives and edge strips are prepared for use as required
Synthetic floor covering material to be installed is checked against the work order

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Synthetic floor covering is acclimatised according to manufacturer recommendations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Soft underlays for synthetic floor coverings, where applicable, are cut and laid to specification

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Working lines and starting point are established

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adhesives and edge strips are prepared for use as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Lay floor covering

  1. Instructions and sequence for laying and fixing are followed
  2. Materials for fixing are organised and used in accordance with relevant safety management requirements
  3. Synthetic floor coverings are laid out to meet pattern and specification requirements and to minimise waste and joins
  4. Synthetic floor coverings are accurately and clearly marked for cutting
  5. Synthetic floor coverings are cut to length, joins are cut and prepared for final laying
  6. Line marking is completed where required
  7. Cover trims are fitted and finished
  8. Completed installation is checked for flaws in installation and materials and faults rectified
Instructions and sequence for laying and fixing are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials for fixing are organised and used in accordance with relevant safety management requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Synthetic floor coverings are laid out to meet pattern and specification requirements and to minimise waste and joins

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Synthetic floor coverings are accurately and clearly marked for cutting

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Synthetic floor coverings are cut to length, joins are cut and prepared for final laying

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Line marking is completed where required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cover trims are fitted and finished

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Completed installation is checked for flaws in installation and materials and faults rectified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete housekeeping

  1. Unused materials are stored or recycled as required
  2. Tools and equipment are cleaned and stored appropriately
  3. Work area is cleaned and rubbish disposed of appropriate
  4. Workplace documentation is completed
Unused materials are stored or recycled as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are cleaned and stored appropriately

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned and rubbish disposed of appropriate

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is completed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for installation

1.1

Applicable work health and safety (WHS), legislative and organisational requirements relevant to the installation of synthetic textile floor coverings are verified and complied with

1.2

Instructions and/or plans are read and interpreted to identify the process required to complete work tasks

1.3

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition

1.4

Sub-floor condition is assessed for suitability for installation

1.5

Suitable adhesives, trims and accessories are selected, if required

1.6

Sequence of work is planned, including the starting point, to ensure efficiency and quality of installation

2

Set out materials

2.1

Synthetic floor covering material to be installed is checked against the work order

2.2

Synthetic floor covering is acclimatised according to manufacturer recommendations

2.3

Soft underlays for synthetic floor coverings, where applicable, are cut and laid to specification

2.4

Working lines and starting point are established

2.5

Adhesives and edge strips are prepared for use as required

3

Lay floor covering

3.1

Instructions and sequence for laying and fixing are followed

3.2

Materials for fixing are organised and used in accordance with relevant safety management requirements

3.3

Synthetic floor coverings are laid out to meet pattern and specification requirements and to minimise waste and joins

3.4

Synthetic floor coverings are accurately and clearly marked for cutting

3.5

Synthetic floor coverings are cut to length, joins are cut and prepared for final laying

3.6

Line marking is completed where required

3.7

Cover trims are fitted and finished

3.8

Completed installation is checked for flaws in installation and materials and faults rectified

4

Complete housekeeping

4.1

Unused materials are stored or recycled as required

4.2

Tools and equipment are cleaned and stored appropriately

4.3

Work area is cleaned and rubbish disposed of appropriate

4.4

Workplace documentation is completed

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for installation

1.1

Applicable work health and safety (WHS), legislative and organisational requirements relevant to the installation of synthetic textile floor coverings are verified and complied with

1.2

Instructions and/or plans are read and interpreted to identify the process required to complete work tasks

1.3

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition

1.4

Sub-floor condition is assessed for suitability for installation

1.5

Suitable adhesives, trims and accessories are selected, if required

1.6

Sequence of work is planned, including the starting point, to ensure efficiency and quality of installation

2

Set out materials

2.1

Synthetic floor covering material to be installed is checked against the work order

2.2

Synthetic floor covering is acclimatised according to manufacturer recommendations

2.3

Soft underlays for synthetic floor coverings, where applicable, are cut and laid to specification

2.4

Working lines and starting point are established

2.5

Adhesives and edge strips are prepared for use as required

3

Lay floor covering

3.1

Instructions and sequence for laying and fixing are followed

3.2

Materials for fixing are organised and used in accordance with relevant safety management requirements

3.3

Synthetic floor coverings are laid out to meet pattern and specification requirements and to minimise waste and joins

3.4

Synthetic floor coverings are accurately and clearly marked for cutting

3.5

Synthetic floor coverings are cut to length, joins are cut and prepared for final laying

3.6

Line marking is completed where required

3.7

Cover trims are fitted and finished

3.8

Completed installation is checked for flaws in installation and materials and faults rectified

4

Complete housekeeping

4.1

Unused materials are stored or recycled as required

4.2

Tools and equipment are cleaned and stored appropriately

4.3

Work area is cleaned and rubbish disposed of appropriate

4.4

Workplace documentation is completed

Comply with legislation, regulations, standards, codes of practice and established safe practices and procedures for installing synthetic textile and other floor coverings to sports facilities and outdoor spaces, including ventilation standards

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Follow work instructions, operating procedures and inspection practices to:

minimise the risk of injury to self and others

prevent damage to goods, equipment and products

maintain required production output and product quality

Complete installation of a minimum of two (2) types of synthetic floor covering, one (1) textile and one (1) non-textile, to an indoor sports floor and one (1) to an outdoor installation

Modify activities to cater for variations in workplace contexts and environment

Collect, organise and understand information related to work orders, basic plans and safety procedures

Communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with site supervisor, other workers and customers, and the reporting of work outcomes and problems

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Use pre-checking and inspection techniques to anticipate problems installing synthetic textile floor coverings to sport facilities to avoid re-work and wastage

Recognise and respond to circumstances outside instructions or personal competence

Plan and organise activities, including the preparation and layout of the worksite and the obtaining of equipment and materials to avoid any backtracking, work flow interruptions or wastage

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate other material requirements

Maintain current knowledge of:

tools and materials

installation techniques

indoor and outdoor synthetic flooring materials and adhesives

Use the limited workplace technology related to the installation of synthetic textile floor coverings to sports facilities and outdoor spaces, including tools, equipment, calculators and measuring devices

State or territory WHS legislation, regulations, standards and codes of practice relevant to installing synthetic floor coverings for sports facilities

Organisational and site standards, requirements, policies and procedures for installing synthetic floor coverings for sports facilities

Environmental protection requirements

Established communication channels and protocols

Relevant problem identification and resolution

Types of tools and equipment and procedures for their safe use, operation and maintenance

Characteristics of materials, products and defects

Set-up and operation of equipment

Products assembly techniques

Procedures for the recording, reporting and maintenance of workplace records and information

Appropriate mathematical procedures for estimation and measurement

Types, characteristics, uses and limitations of:

synthetic textile and other floor coverings used in sporting facilities and outdoor spaces

installation adhesives and their uses

underlay cushions

Types and uses of installation tools and equipment

Workplace safety system requirements related to installing synthetic textile floor coverings used in sporting facilities

Characteristics and requirements of sub-floor preparation

Work flow in relation to flooring installation operations

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Legislative requirements include:

applicable legislation from all levels of government that affect organisational operation

award and enterprise agreements

industrial relations

Australian Standards

confidentiality and privacy

WHS

the environment

equal employment opportunity (EEO)

anti-discrimination

relevant industry codes of practice

duty of care and heritage

WHS requirements include:

Commonwealth, state or territory legislation and regulations

organisational safety policies and procedures

the use of personal protective equipment and clothing

firefighting equipment

first aid equipment

hazard and risk control and elimination

control of hazardous materials and substances

manual handling, including lifting and carrying

Organisational requirements include:

legal, organisational and site guidelines

policies and procedures relating to own role and responsibility

quality assurance

procedural manuals

quality and continuous improvement processes and standards

WHS

emergency and evacuation

ethical standards

recording and reporting

access and equity principles and practices

equipment use, maintenance and storage

environmental management (waste disposal, recycling and re-use guidelines)

Synthetic textile floor coverings include:

synthetic turf

needle punch carpet

PVC-backed carpet

rubber-backed carpet

solid ethylene vinyl acetate (EVA)

vinyl (solid and tile)

Installation locations include:

indoor and outdoor sports facilities

public and private playgrounds

recreational areas and other common spaces

traffic islands

marine applications

Instructions include:

workplace procedures relating to the use and operation of tools and equipment

workplace instructions, including job sheets, plans, drawings and designs

workplace procedures relating to reporting and communications

manufacturer instructions for the use of equipment and materials

Tools and equipment include:

straight edge tape measure

chalk-line

hammer

utility knife

notched trowel

wall trimmer

cushion back cutter

loop pile cutter

laser measuring device

bar scriber

Materials include:

finishing trims, angles and joining tapes

Adhesives include:

plasticised and rubber resin acrylic

water, solvent-based and solvent-free adhesives

solvent-based contact adhesive

two-part polyurethane

Underlays include:

rubber

bonded foam

styrene-butadiene rubber (SBR)

latex foam