The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for the work
|
|
Identify and follow work health and safety, legislative, and organisational requirements Completed |
Evidence:
|
Correctly interpret work orders and confirm job requirements Completed |
Evidence:
|
Select and check tools and equipment for suitability, serviceability and safety prior to use Completed |
Evidence:
|
Plan application with respect to specified film thickness and/or consumption, cutting in, boundaries, seams, joints and exit points Completed |
Evidence:
|
Prepare the substrate
|
|
Inspect condition of the mechanically prepared subfloor and confirm suitability for required finish consistent with supplier recommendations Completed |
Evidence:
|
Remove dust and debris from the substrate prior to application, and control sources Completed |
Evidence:
|
Set out work area
|
|
Establish mixing area in suitable area and select surface protection measures and apply to areas not being coated Completed |
Evidence:
|
Check coating materials for correct quantities, undamaged packaging and no obvious discrepancies in colour and viscosity Completed |
Evidence:
|
Select suitable masking tape and correctly apply to mark off edges, transitions and other floor boundaries Completed |
Evidence:
|
Prepare high-build decorative system
|
|
Correctly fit personal protective equipment (PPE) before coating materials are handled Completed |
Evidence:
|
Accurately measure component quantities and mix in accordance with supplier instructions. Completed |
Evidence:
|
Apply high-build decorative system
|
|
Apply mixed basecoat in accordance with supplier application notes Completed |
Evidence:
|
Prepare cured basecoat for topcoat application in accordance with supplier application notes Completed |
Evidence:
|
Apply mixed topcoat in accordance with supplier application notes Completed |
Evidence:
|
Check coating applications for quality at each stage and rectify any deficiencies Completed |
Evidence:
|
Complete housekeeping
|
|
Check, clean and store tools and equipment in accordance with workplace procedures Completed |
Evidence:
|
Seal and store unused coating materials in accordance with supplier instructions Completed |
Evidence:
|
Clean work area and dispose of rubbish safely Completed |
Evidence:
|
Accurately complete required workplace and project documentation Completed |
Evidence:
|
Identify and follow work health and safety, legislative, and organisational requirements Completed |
Evidence:
|
Correctly interpret work orders and confirm job requirements Completed |
Evidence:
|
Select and check tools and equipment for suitability, serviceability and safety prior to use Completed |
Evidence:
|
Plan application with respect to specified film thickness and/or consumption, cutting in, boundaries, seams, joints and exit points Completed |
Evidence:
|
Inspect condition of the mechanically prepared subfloor and confirm suitability for required finish consistent with supplier recommendations Completed |
Evidence:
|
Remove dust and debris from the substrate prior to application, and control sources Completed |
Evidence:
|
Establish mixing area in suitable area and select surface protection measures and apply to areas not being coated Completed |
Evidence:
|
Check coating materials for correct quantities, undamaged packaging and no obvious discrepancies in colour and viscosity Completed |
Evidence:
|
Select suitable masking tape and correctly apply to mark off edges, transitions and other floor boundaries Completed |
Evidence:
|