The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for work
|
|
Identify and follow work health and safety, legislative and organisational requirements Completed |
Evidence:
|
Correctly identify work requirements and process from review of documentation Completed |
Evidence:
|
Confirm subfloor suitability for installation consistent with Australian Standards and manufacturer recommendations Completed |
Evidence:
|
Select underlays adhesives, trims and accessories based on job requirements Completed |
Evidence:
|
Select and check tools, equipment and materials prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition Completed |
Evidence:
|
Plan sequence of work, including the starting point, to ensure efficiency and quality of installation. Completed |
Evidence:
|
Set out materials for installation
|
|
Check flooring against work order and acclimatise in accordance with manufacturer recommendations Completed |
Evidence:
|
Organise pre-finished, engineered or direct stick timber flooring for fixing and use in accordance with relevant safety management requirements Completed |
Evidence:
|
Remove or undercut skirting boards or cover trims, if required, and store for re-fitting or send for machining in accordance with job requirements Completed |
Evidence:
|
Prepare required adhesives and accessories for use in accordance with manufacturer instructions Completed |
Evidence:
|
Establish working lines and starting point Completed |
Evidence:
|
Prepare and cut flooring
|
|
Follow instructions and sequence for laying and fixing Completed |
Evidence:
|
Lay appropriate underlay in accordance with manufacturer recommendations Completed |
Evidence:
|
Lay out flooring to meet directional sequence, pattern match, specification requirements, and minimising waste and joins Completed |
Evidence:
|
Maximise the aesthetics of materials, where appropriate, by matching grains and colours Completed |
Evidence:
|
Accurately and clearly mark flooring for cutting Completed |
Evidence:
|
Cut timber flooring to length and size for final laying ensuring minimum waste. Completed |
Evidence:
|
Lay flooring
|
|
Organise materials for fixing and use in accordance with safety management requirements Completed |
Evidence:
|
Prepare required adhesives and accessories for use Completed |
Evidence:
|
Use fixing methods and equipment in accordance with manufacturer recommendations Completed |
Evidence:
|
Allow appropriate field and perimeter expansion joints Completed |
Evidence:
|
Fit and/or re-fit skirting boards or cover trims and finish in accordance with job requirements Completed |
Evidence:
|
Inspect finished job and rectify any imperfections in accordance with workplace procedures Completed |
Evidence:
|
Complete housekeeping
|
|
Store and recycle unused materials in accordance with workplace procedures Completed |
Evidence:
|
Check, clean and store tools and equipment in accordance with workplace procedures Completed |
Evidence:
|
Clean work area and dispose of rubbish safely Completed |
Evidence:
|
Accurately complete required workplace documentation Completed |
Evidence:
|
Identify and follow work health and safety, legislative and organisational requirements Completed |
Evidence:
|
Correctly identify work requirements and process from review of documentation Completed |
Evidence:
|
Confirm subfloor suitability for installation consistent with Australian Standards and manufacturer recommendations Completed |
Evidence:
|
Select underlays adhesives, trims and accessories based on job requirements Completed |
Evidence:
|
Select and check tools, equipment and materials prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition Completed |
Evidence:
|
Plan sequence of work, including the starting point, to ensure efficiency and quality of installation. Completed |
Evidence:
|