NTISthis.com

Evidence Guide: MSFFL3098 - Sand and fill parquetry flooring

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFFL3098 - Sand and fill parquetry flooring

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for the work

  1. Identify and follow work health and safety, legislative and organisational requirements
  2. Read work documentation and identify job requirements
  3. Identify surface suitability for fine sanding based on contamination and moisture content inspection, and complete pre-sanding requirements
  4. Assess and confirm parquetry flooring condition and the extent of coarse, finish and fine sanding and filling required to meet job specifications
  5. Select and check tools, equipment and materials for suitability, serviceability and safety prior to use
  6. Isolate and/or encapsulate the job site to contain dust fallout from sanding operation
  7. Plan sequence of work to ensure efficiency and quality of application
  8. Set up, check and adjust sanding equipment and safety features in accordance with manufacturer instructions
  9. Select and change equipment to meet requirements of the job
  10. Select, attach and routinely check and change sanding belts or papers to ensure quality finish
  11. Conduct trial runs to check machine operations and quality of finished work
  12. Complete sanding systematically and effectively with the grain, against the grain and across the grain within the minimum required timeframe
  13. Complete required routine lubrication and adjustments to the equipment
  14. Clean and check final finish against quality and job requirements, and rectify deficiencies
  15. Check ventilation before chemical fumes are released, and confirm all WHS and environmental protection requirements are met
  16. Prepare filling material in accordance with manufacturer specifications
  17. Make trial applications of fillers to check equipment operation, materials consistency, viscosity and specified colour
  18. Identify faults and/or inconsistencies in colour and follow workplace procedures for rectification and adjustments
  19. Apply filling material in accordance with manufacturer recommendations and observe drying times between coats
  20. Sand between coats as required in accordance with manufacturer recommendations
Identify and follow work health and safety, legislative and organisational requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Read work documentation and identify job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify surface suitability for fine sanding based on contamination and moisture content inspection, and complete pre-sanding requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assess and confirm parquetry flooring condition and the extent of coarse, finish and fine sanding and filling required to meet job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select and check tools, equipment and materials for suitability, serviceability and safety prior to use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Isolate and/or encapsulate the job site to contain dust fallout from sanding operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Plan sequence of work to ensure efficiency and quality of application

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set up, check and adjust sanding equipment and safety features in accordance with manufacturer instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select and change equipment to meet requirements of the job

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select, attach and routinely check and change sanding belts or papers to ensure quality finish

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct trial runs to check machine operations and quality of finished work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete sanding systematically and effectively with the grain, against the grain and across the grain within the minimum required timeframe

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete required routine lubrication and adjustments to the equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean and check final finish against quality and job requirements, and rectify deficiencies

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check ventilation before chemical fumes are released, and confirm all WHS and environmental protection requirements are met

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare filling material in accordance with manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Make trial applications of fillers to check equipment operation, materials consistency, viscosity and specified colour

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify faults and/or inconsistencies in colour and follow workplace procedures for rectification and adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply filling material in accordance with manufacturer recommendations and observe drying times between coats

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Sand between coats as required in accordance with manufacturer recommendations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean and check final finish against quality and job requirements, and rectify deficiencies

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete housekeeping

  1. Store and recycle unused materials in accordance with workplace procedures
  2. Check, clean and store tools and equipment in accordance with workplace procedures
  3. Clean work area and dispose of rubbish safely
  4. Accurately complete required workplace documentation
  5. Identify and follow work health and safety, legislative and organisational requirements
  6. Read work documentation and identify job requirements
  7. Identify surface suitability for fine sanding based on contamination and moisture content inspection, and complete pre-sanding requirements
  8. Assess and confirm parquetry flooring condition and the extent of coarse, finish and fine sanding and filling required to meet job specifications
  9. Select and check tools, equipment and materials for suitability, serviceability and safety prior to use
  10. Isolate and/or encapsulate the job site to contain dust fallout from sanding operation
  11. Plan sequence of work to ensure efficiency and quality of application
  12. Set up, check and adjust sanding equipment and safety features in accordance with manufacturer instructions
  13. Select and change equipment to meet requirements of the job
  14. Select, attach and routinely check and change sanding belts or papers to ensure quality finish
  15. Conduct trial runs to check machine operations and quality of finished work
  16. Complete sanding systematically and effectively with the grain, against the grain and across the grain within the minimum required timeframe
  17. Complete required routine lubrication and adjustments to the equipment
  18. Clean and check final finish against quality and job requirements, and rectify deficiencies
  19. Check ventilation before chemical fumes are released, and confirm all WHS and environmental protection requirements are met
  20. Prepare filling material in accordance with manufacturer specifications
  21. Make trial applications of fillers to check equipment operation, materials consistency, viscosity and specified colour
  22. Identify faults and/or inconsistencies in colour and follow workplace procedures for rectification and adjustments
  23. Apply filling material in accordance with manufacturer recommendations and observe drying times between coats
  24. Sand between coats as required in accordance with manufacturer recommendations
Store and recycle unused materials in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check, clean and store tools and equipment in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean work area and dispose of rubbish safely

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Accurately complete required workplace documentation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify and follow work health and safety, legislative and organisational requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Read work documentation and identify job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify surface suitability for fine sanding based on contamination and moisture content inspection, and complete pre-sanding requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assess and confirm parquetry flooring condition and the extent of coarse, finish and fine sanding and filling required to meet job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select and check tools, equipment and materials for suitability, serviceability and safety prior to use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Isolate and/or encapsulate the job site to contain dust fallout from sanding operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Plan sequence of work to ensure efficiency and quality of application

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set up, check and adjust sanding equipment and safety features in accordance with manufacturer instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select and change equipment to meet requirements of the job

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select, attach and routinely check and change sanding belts or papers to ensure quality finish

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct trial runs to check machine operations and quality of finished work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete sanding systematically and effectively with the grain, against the grain and across the grain within the minimum required timeframe

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete required routine lubrication and adjustments to the equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean and check final finish against quality and job requirements, and rectify deficiencies

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check ventilation before chemical fumes are released, and confirm all WHS and environmental protection requirements are met

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare filling material in accordance with manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Make trial applications of fillers to check equipment operation, materials consistency, viscosity and specified colour

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify faults and/or inconsistencies in colour and follow workplace procedures for rectification and adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply filling material in accordance with manufacturer recommendations and observe drying times between coats

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Sand between coats as required in accordance with manufacturer recommendations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean and check final finish against quality and job requirements, and rectify deficiencies

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Store and recycle unused materials in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check, clean and store tools and equipment in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean work area and dispose of rubbish safely

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Accurately complete required workplace documentation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge