The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to install adhesive-fixed carpet
|
|
Interpret underlay and carpet installation requirements from job and manufacturer instructions and calculate the quantities of materials required Completed |
Evidence:
|
Identify hazards relating to the work site, work practices, materials, tools and equipment, and check risk treatments are in place and operating Completed |
Evidence:
|
Select and check all required tools and equipment are ready to use, and organise to fix any deficiencies according to workplace procedures Completed |
Evidence:
|
Gather underlay, carpet, adhesives, trims and other materials required by job instructions, and check they meet quality requirements and are prepared and ready to install according to manufacturer instructions, product labels and safety data sheets Completed |
Evidence:
|
Confirm the subfloor is clean and suitable for installing the carpet, and fix or report any deficiencies according to workplace procedures Completed |
Evidence:
|
Apply primer to the subfloor according to the manufacturer instructions Completed |
Evidence:
|
Lay carpet using the direct-stick method
|
|
Determine the set out and laying direction of the carpet according to job instructions to minimise waste and joins, consider the direction of the pile, and ensure an efficient, quality installation Completed |
Evidence:
|
Establish the skirting point and seam placements for the carpet Completed |
Evidence:
|
Lay out carpet pieces and measure, mark and check them for size, direction of the pile, pattern and match Completed |
Evidence:
|
Fold back the carpet and apply adhesive to the subfloor according to the manufacturer instructions and workplace procedures Completed |
Evidence:
|
Position, stretch and fasten the carpet into the adhesive, and seal and join the carpet pieces, according to the manufacturer instructions Completed |
Evidence:
|
Trim off excess carpet, install finishing strips, and finish installing the carpet to meet quality requirements Completed |
Evidence:
|
Check the carpet is installed correctly according to job instructions and quality requirements, and fix any deficiencies Completed |
Evidence:
|
Lay carpet using the dual-bond method
|
|
Confirm the subfloor is clean and suitable for installing the carpet, and fix or report any deficiencies according to workplace procedures Completed |
Evidence:
|
Apply primer to the subfloor according to the manufacturer instructions Completed |
Evidence:
|
Establish the skirting point and seam placements for the underlay Completed |
Evidence:
|
Lay out and trim the underlay according to job instructions Completed |
Evidence:
|
Fold back the underlay and apply adhesive to the subfloor according to the manufacturer instructions, product labels, safety data sheets and workplace procedures Completed |
Evidence:
|
Position and fasten the underlay into the adhesive and trim the underlay according to the manufacturer instructions and job instructions Completed |
Evidence:
|
Establish the skirting point and seam placements for the carpet Completed |
Evidence:
|
Lay out the carpet pieces and measure, mark and check them for size, direction of the pile, pattern and match Completed |
Evidence:
|
Fold back the carpet and apply adhesive to the underlay according to the manufacturer instructions and workplace procedures Completed |
Evidence:
|
Position, stretch and fasten the carpet into the adhesive, and seal and join the carpet pieces, according to the manufacturer instructions Completed |
Evidence:
|
Trim off excess carpet, install finishing strips and finish installing the carpet to meet quality requirements Completed |
Evidence:
|
Check the carpet is installed correctly according to job instructions and quality requirements, and fix any deficiencies Completed |
Evidence:
|
Complete the task according to workplace procedures
|
|
Clean up the work area, identify items for recycling and dispose of waste Completed |
Evidence:
|
Identify, tag and report any damage to equipment and tools Completed |
Evidence:
|
Check, clean and do routine maintenance on equipment and tools and store them and unused materials Completed |
Evidence:
|
Complete task outcome documentation Completed |
Evidence:
|