NTISthis.com

Evidence Guide: MSFFM2009 - Construct cane furniture

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFFM2009 - Construct cane furniture

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  2. Tools, machines and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
  3. Furniture design, tolerances, process, materials and quantities are determined from work instructions
  4. Construction and assembly sequence is planned
  5. Procedures are determined for checking quality at each stage of the process
  6. Suitable work area is selected for the task
  7. Preparatory drawings/set-outs for tasks are completed
  8. Cutting list for components is developed
  9. Materials are selected following work instructions
Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, machines and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Furniture design, tolerances, process, materials and quantities are determined from work instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Construction and assembly sequence is planned

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Procedures are determined for checking quality at each stage of the process

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Suitable work area is selected for the task

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Preparatory drawings/set-outs for tasks are completed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cutting list for components is developed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials are selected following work instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete construction

  1. Material is set out and prepared according to work instructions and components are marked according to workplace procedures
  2. Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications
  3. Components are manufactured, including any specified shapes, angles or curves, and checked against set-out and job requirements
  4. Components are assembled using jigs and/or clamps and fastenings
  5. Adhesives are applied according to workplace procedures and/or manufacturer instructions
  6. Joining process is undertaken according to workplace procedures
  7. Assembled furniture is checked for compliance with specifications
  8. Furniture is prepared for finishing
  9. Any non-conformity with the required quality standards is rectified
Material is set out and prepared according to work instructions and components are marked according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Components are manufactured, including any specified shapes, angles or curves, and checked against set-out and job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Components are assembled using jigs and/or clamps and fastenings

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adhesives are applied according to workplace procedures and/or manufacturer instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Joining process is undertaken according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assembled furniture is checked for compliance with specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Furniture is prepared for finishing

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Any non-conformity with the required quality standards is rectified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Finalise operation and maintain equipment

  1. Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures
  2. Machinery is cleaned and left in a safe mode
  3. Faulty and/or defective equipment is tagged and reported in accordance with workplace practices
  4. Unused hardware is collected and stored for re-use or disposal following workplace procedures
  5. Waste and scrap materials are dealt with following workplace procedures
Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machinery is cleaned and left in a safe mode

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faulty and/or defective equipment is tagged and reported in accordance with workplace practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unused hardware is collected and stored for re-use or disposal following workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Waste and scrap materials are dealt with following workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

1.2

Tools, machines and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition

1.3

Furniture design, tolerances, process, materials and quantities are determined from work instructions

1.4

Construction and assembly sequence is planned

1.5

Procedures are determined for checking quality at each stage of the process

1.6

Suitable work area is selected for the task

1.7

Preparatory drawings/set-outs for tasks are completed

1.8

Cutting list for components is developed

1.9

Materials are selected following work instructions

2

Complete construction

2.1

Material is set out and prepared according to work instructions and components are marked according to workplace procedures

2.2

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

2.3

Components are manufactured, including any specified shapes, angles or curves, and checked against set-out and job requirements

2.4

Components are assembled using jigs and/or clamps and fastenings

2.5

Adhesives are applied according to workplace procedures and/or manufacturer instructions

2.6

Joining process is undertaken according to workplace procedures

2.7

Assembled furniture is checked for compliance with specifications

2.8

Furniture is prepared for finishing

2.9

Any non-conformity with the required quality standards is rectified

3

Finalise operation and maintain equipment

3.1

Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures

3.2

Machinery is cleaned and left in a safe mode

3.3

Faulty and/or defective equipment is tagged and reported in accordance with workplace practices

3.4

Unused hardware is collected and stored for re-use or disposal following workplace procedures

3.5

Waste and scrap materials are dealt with following workplace procedures

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

1.2

Tools, machines and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition

1.3

Furniture design, tolerances, process, materials and quantities are determined from work instructions

1.4

Construction and assembly sequence is planned

1.5

Procedures are determined for checking quality at each stage of the process

1.6

Suitable work area is selected for the task

1.7

Preparatory drawings/set-outs for tasks are completed

1.8

Cutting list for components is developed

1.9

Materials are selected following work instructions

2

Complete construction

2.1

Material is set out and prepared according to work instructions and components are marked according to workplace procedures

2.2

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

2.3

Components are manufactured, including any specified shapes, angles or curves, and checked against set-out and job requirements

2.4

Components are assembled using jigs and/or clamps and fastenings

2.5

Adhesives are applied according to workplace procedures and/or manufacturer instructions

2.6

Joining process is undertaken according to workplace procedures

2.7

Assembled furniture is checked for compliance with specifications

2.8

Furniture is prepared for finishing

2.9

Any non-conformity with the required quality standards is rectified

3

Finalise operation and maintain equipment

3.1

Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures

3.2

Machinery is cleaned and left in a safe mode

3.3

Faulty and/or defective equipment is tagged and reported in accordance with workplace practices

3.4

Unused hardware is collected and stored for re-use or disposal following workplace procedures

3.5

Waste and scrap materials are dealt with following workplace procedures

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Follow work instructions, operating procedures and inspection practices to:

minimise the risk of injury to self and others

prevent damage to goods, equipment and products

maintain required production output and product quality

Construct three (3) cane furniture items products, including:

a two or three seater lounge

an oval dining table

a dining chair

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Minimise wastage of resources, including materials, time and money

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Interpretation of plan representation of cane furniture design

Preparation of drawings/set-outs

Identification of hand and/or power tools, materials, equipment, processes and procedures

Work flow in relation to cane furniture production

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Cane furniture includes:

lounge chairs

dining chairs

tables

side tables

coffee tables

entertainment units

bookcases

Preparation for finishing includes:

the application of binding cane/peel and the sanding of the furniture

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous substances and dangerous goods code, and local safe operating procedures

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work involves reading and interpreting plans, developing set-outs, using hand and power tools and equipment and operating woodworking machinery

competency may be demonstrated in workplaces involved in the manufacture of cane furniture

Tools and equipment include:

nail guns

pin nailers

glue guns

measuring tapes or rulers

hammers

mallets

squares

bevels

chisels

hand saws

power saws

power drills/screwdrivers

pneumatic tools, compressor and spray equipment

clamps

screwdrivers

pincers

Machines include:

band saws

docking saws

jig saws

bench saws

vertical drill presses and presses

Checking of constructed product is to cover:

squareness

parallel

twist

distortion

Materials include:

adhesives

screws

nails

binding cane

steel bars

metal recliner actions

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies and practices

Information and procedures include:

workplace procedures relating to the use of tools and equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures