The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Identify glass types, glazing products and consumables
|
|
Applicable work health and safety (WHS), legislative and organisational requirements relevant to glass and glazing work are verified and complied with Completed |
Evidence:
|
The characteristics of glass types and glazing products are identified to determine their use and suitability for a range of glazing work Completed |
Evidence:
|
Types and quantities of glazing consumables required for a glazing job are identified from plans or work instructions Completed |
Evidence:
|
Prepare to use glass and glazing products
|
|
Work requirements for glass and glazing work are determined in a logical order to suit the job Completed |
Evidence:
|
Common glass and glazing tools, equipment, personal protective equipment, and their use in glass and glazing work are identified Completed |
Evidence:
|
Glass to match work requirements is checked for type, size and imperfections Completed |
Evidence:
|
Glazing products are selected in accordance with customer orders and Australian Standards Completed |
Evidence:
|
Defective glazing products are reported for repair or replacement in accordance with workplace procedures Completed |
Evidence:
|
Handle and use glass and glazing consumables
|
|
Consumables are selected and checked prior to use to ensure they are appropriate for the planned glazing work Completed |
Evidence:
|
Consumables are handled and used according to workplace procedures, manufacturer instructions and industry practice Completed |
Evidence:
|
Any problems occurring when using consumables are identified, rectified and/or reported, where appropriate Completed |
Evidence:
|
Store glass and glazing consumables
|
|
Unused glass, glazing products and consumables are assembled after completion of the job, checked for reusability, cleaned and stored safely and effectively Completed |
Evidence:
|
Waste and scrap material are removed for disposal or recycling, as required Completed |
Evidence:
|
Work area is cleaned and rubbish disposed of, as appropriate Completed |
Evidence:
|