NTISthis.com

Evidence Guide: MSFGG3010 - Set up and operate glass laminating equipment

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFGG3010 - Set up and operate glass laminating equipment

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. Work requirements from work instructions are determined
  2. Work health and safety (WHS) requirements relevant to operating glass laminating equipment, including personal protective equipment, are observed throughout the work
  3. Work sequence is planned in a logical order to suit the job and workplace procedures
  4. Tools, equipment and materials are selected and checked prior to use to ensure they are appropriate for the work, of the required quality, serviceable and in a safe condition
  5. Machines, cutting tools and jigs are identified and checked for safe and effective operation, including emergency stops, gauges, guards and controls
  6. Procedures for checking the quality of materials and items produced, rating system compliance, working condition of equipment and quality requirements for each stage of the laminating process are identified
  7. Communication with others involved with the work is established and maintained to ensure efficient work flow coordination, personnel cooperation and safety throughout the work
Work requirements from work instructions are determined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work health and safety (WHS) requirements relevant to operating glass laminating equipment, including personal protective equipment, are observed throughout the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work sequence is planned in a logical order to suit the job and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked prior to use to ensure they are appropriate for the work, of the required quality, serviceable and in a safe condition

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machines, cutting tools and jigs are identified and checked for safe and effective operation, including emergency stops, gauges, guards and controls

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Procedures for checking the quality of materials and items produced, rating system compliance, working condition of equipment and quality requirements for each stage of the laminating process are identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Communication with others involved with the work is established and maintained to ensure efficient work flow coordination, personnel cooperation and safety throughout the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set up equipment

  1. Machine settings and adjustments are made in accordance with job requirements and machine and tool manufacturer instructions
  2. Trial runs are conducted to check machine operation, accuracy and quality of finished work, and any necessary adjustments made to machine settings
Machine settings and adjustments are made in accordance with job requirements and machine and tool manufacturer instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trial runs are conducted to check machine operation, accuracy and quality of finished work, and any necessary adjustments made to machine settings

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct glass laminating operations

  1. Glass to be laminated is prepared for the process in accordance with workplace procedures or industry practice
  2. Start-up and shutdown procedures for equipment used in the laminating process are completed in accordance with manufacturer instructions or workplace procedures
  3. Glass flopping and washing procedures are conducted in accordance with manufacturer instructions or workplace procedures
  4. White room procedures are conducted in accordance with manufacturer instructions or workplace procedures
  5. White room hoist is operated in accordance with manufacturer instructions or workplace procedures
  6. Pre-press oven and glass stacker are operated in accordance with manufacturer instructions or workplace procedures to recognised industry standards
  7. Air lifter is operated in accordance with manufacturer instructions or workplace procedures
  8. Autoclave is loaded, operated and unloaded in accordance with manufacturer instructions or workplace procedures
  9. Cutting table is operated to cut glass to required size (if applicable) in accordance with manufacturer instructions or workplace procedures
  10. Straight line linear machine is operated in accordance with manufacturer instructions or workplace procedures
Glass to be laminated is prepared for the process in accordance with workplace procedures or industry practice

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Start-up and shutdown procedures for equipment used in the laminating process are completed in accordance with manufacturer instructions or workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Glass flopping and washing procedures are conducted in accordance with manufacturer instructions or workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

White room procedures are conducted in accordance with manufacturer instructions or workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

White room hoist is operated in accordance with manufacturer instructions or workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Pre-press oven and glass stacker are operated in accordance with manufacturer instructions or workplace procedures to recognised industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Air lifter is operated in accordance with manufacturer instructions or workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Autoclave is loaded, operated and unloaded in accordance with manufacturer instructions or workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cutting table is operated to cut glass to required size (if applicable) in accordance with manufacturer instructions or workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Straight line linear machine is operated in accordance with manufacturer instructions or workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work and maintain equipment

  1. Product is inspected for quality of work and items which do not meet quality requirements discarded or returned for reprocessing in accordance with workplace procedures
  2. Completed work is placed in holding area in accordance with workplace procedures
  3. Work area is cleaned and rubbish disposed of, as appropriate
  4. Equipment is cleaned and inspected for serviceability in accordance with workplace procedures
  5. Unserviceable equipment is tagged and faults identified in accordance with workplace procedures
  6. Equipment and tooling is maintained in accordance with workplace procedures
  7. Tools, equipment and unused materials are removed and stored appropriately
  8. Workplace documentation is completed in accordance with workplace requirements
Product is inspected for quality of work and items which do not meet quality requirements discarded or returned for reprocessing in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Completed work is placed in holding area in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned and rubbish disposed of, as appropriate

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment is cleaned and inspected for serviceability in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unserviceable equipment is tagged and faults identified in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment and tooling is maintained in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and unused materials are removed and stored appropriately

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is completed in accordance with workplace requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Work requirements from work instructions are determined

1.2

Work health and safety (WHS) requirements relevant to operating glass laminating equipment, including personal protective equipment, are observed throughout the work

1.3

Work sequence is planned in a logical order to suit the job and workplace procedures

1.4

Tools, equipment and materials are selected and checked prior to use to ensure they are appropriate for the work, of the required quality, serviceable and in a safe condition

1.5

Machines, cutting tools and jigs are identified and checked for safe and effective operation, including emergency stops, gauges, guards and controls

1.6

Procedures for checking the quality of materials and items produced, rating system compliance, working condition of equipment and quality requirements for each stage of the laminating process are identified

1.7

Communication with others involved with the work is established and maintained to ensure efficient work flow coordination, personnel cooperation and safety throughout the work

2

Set up equipment

2.1

Machine settings and adjustments are made in accordance with job requirements and machine and tool manufacturer instructions

2.2

Trial runs are conducted to check machine operation, accuracy and quality of finished work, and any necessary adjustments made to machine settings

3

Conduct glass laminating operations

3.1

Glass to be laminated is prepared for the process in accordance with workplace procedures or industry practice

3.2

Start-up and shutdown procedures for equipment used in the laminating process are completed in accordance with manufacturer instructions or workplace procedures

3.3

Glass flopping and washing procedures are conducted in accordance with manufacturer instructions or workplace procedures

3.4

White room procedures are conducted in accordance with manufacturer instructions or workplace procedures

3.5

White room hoist is operated in accordance with manufacturer instructions or workplace procedures

3.6

Pre-press oven and glass stacker are operated in accordance with manufacturer instructions or workplace procedures to recognised industry standards

3.7

Air lifter is operated in accordance with manufacturer instructions or workplace procedures

3.8

Autoclave is loaded, operated and unloaded in accordance with manufacturer instructions or workplace procedures

3.9

Cutting table is operated to cut glass to required size (if applicable) in accordance with manufacturer instructions or workplace procedures

3.10

Straight line linear machine is operated in accordance with manufacturer instructions or workplace procedures

4

Complete work and maintain equipment

4.1

Product is inspected for quality of work and items which do not meet quality requirements discarded or returned for reprocessing in accordance with workplace procedures

4.2

Completed work is placed in holding area in accordance with workplace procedures

4.3

Work area is cleaned and rubbish disposed of, as appropriate

4.4

Equipment is cleaned and inspected for serviceability in accordance with workplace procedures

4.5

Unserviceable equipment is tagged and faults identified in accordance with workplace procedures

4.6

Equipment and tooling is maintained in accordance with workplace procedures

4.7

Tools, equipment and unused materials are removed and stored appropriately

4.8

Workplace documentation is completed in accordance with workplace requirements

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Work requirements from work instructions are determined

1.2

Work health and safety (WHS) requirements relevant to operating glass laminating equipment, including personal protective equipment, are observed throughout the work

1.3

Work sequence is planned in a logical order to suit the job and workplace procedures

1.4

Tools, equipment and materials are selected and checked prior to use to ensure they are appropriate for the work, of the required quality, serviceable and in a safe condition

1.5

Machines, cutting tools and jigs are identified and checked for safe and effective operation, including emergency stops, gauges, guards and controls

1.6

Procedures for checking the quality of materials and items produced, rating system compliance, working condition of equipment and quality requirements for each stage of the laminating process are identified

1.7

Communication with others involved with the work is established and maintained to ensure efficient work flow coordination, personnel cooperation and safety throughout the work

2

Set up equipment

2.1

Machine settings and adjustments are made in accordance with job requirements and machine and tool manufacturer instructions

2.2

Trial runs are conducted to check machine operation, accuracy and quality of finished work, and any necessary adjustments made to machine settings

3

Conduct glass laminating operations

3.1

Glass to be laminated is prepared for the process in accordance with workplace procedures or industry practice

3.2

Start-up and shutdown procedures for equipment used in the laminating process are completed in accordance with manufacturer instructions or workplace procedures

3.3

Glass flopping and washing procedures are conducted in accordance with manufacturer instructions or workplace procedures

3.4

White room procedures are conducted in accordance with manufacturer instructions or workplace procedures

3.5

White room hoist is operated in accordance with manufacturer instructions or workplace procedures

3.6

Pre-press oven and glass stacker are operated in accordance with manufacturer instructions or workplace procedures to recognised industry standards

3.7

Air lifter is operated in accordance with manufacturer instructions or workplace procedures

3.8

Autoclave is loaded, operated and unloaded in accordance with manufacturer instructions or workplace procedures

3.9

Cutting table is operated to cut glass to required size (if applicable) in accordance with manufacturer instructions or workplace procedures

3.10

Straight line linear machine is operated in accordance with manufacturer instructions or workplace procedures

4

Complete work and maintain equipment

4.1

Product is inspected for quality of work and items which do not meet quality requirements discarded or returned for reprocessing in accordance with workplace procedures

4.2

Completed work is placed in holding area in accordance with workplace procedures

4.3

Work area is cleaned and rubbish disposed of, as appropriate

4.4

Equipment is cleaned and inspected for serviceability in accordance with workplace procedures

4.5

Unserviceable equipment is tagged and faults identified in accordance with workplace procedures

4.6

Equipment and tooling is maintained in accordance with workplace procedures

4.7

Tools, equipment and unused materials are removed and stored appropriately

4.8

Workplace documentation is completed in accordance with workplace requirements

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Identify and demonstrate glass flopping and washing operation and procedures

Identify and demonstrate the white room operation and procedures

Safely load glass into the pre-press oven and stacker and operate the pre-press oven and stacker during the glass laminating process

Operate an air lifter and an autoclave

Safely complete the requirements of the packing area

Operate a laminating cutting table and carry out post-laminating procedures

Perform testing, classification and marking of laminated glass in accordance with AS/NZS 2208:1996 Safety glazing materials in buildings

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Procedures for the set-up, operation and operator maintenance of glass laminating equipment

Glass and window rating systems for noise, fade control and security applications

Work flow requirements relating to the operation of glass laminating equipment

Characteristics of materials used and uses of products produced in the glass laminating process

Workplace procedures for the reporting of material, product or equipment faults

Workplace safety system requirements related to the operation of glass laminating equipment

Relevant Australian Standards

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate some discretion, judgement and problem solving

Work instructions include:

material to be used

process required to complete work tasks

the type, thickness and colour of the interlayer

number of sheets to be laminated and holding area for completed items

the correct machine heat and pressure settings for the materials being used

Laminated glass includes:

safety glass

automotive glass

bullet and bandit resistant glass

patterned laminated glass

insulated glass

Tools and equipment include:

glass flopping and washing machines

white room

hoist

pre-press oven

glass stacker

air lifter

autoclave

packing equipment

cutting machine

straight line linear machine

standards stamping equipment, including stamp

Materials include:

annealed float

sheet and patterned glass

Personal protective equipment includes:

that prescribed under legislation, regulation and enterprise policies and practices:

gauntlets

gloves

safety glasses

hard hats

safety footwear

aprons and overalls

Information and procedures include:

workplace procedures relating to the use of tools and equipment and personal protective equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures

AS/NZS 2208:1996 Safety glazing materials in buildings