The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Identify work requirements
|
|
Identify work requirements for the type of glass to be used and the method of fixing from work documentation and communication with the customer Completed |
Evidence:
|
Identify and follow work health and safety requirements for commercial reglazing Completed |
Evidence:
|
Plan a logical work sequence suited to the job and workplace procedures Completed |
Evidence:
|
Prepare for work
|
|
Take accurate site measurements and establish clearance and wedge requirements Completed |
Evidence:
|
Select glass and frames to match job requirements and check for type, size and imperfections against job requirements and relevant Australian Standards Completed |
Evidence:
|
Select glass fixing method to meet specifications Completed |
Evidence:
|
Select and check tools and equipment for suitability, serviceability and safety prior to use Completed |
Evidence:
|
Identify site conditions and constraints
|
|
Consult customer and obtain permission prior to site inspection Completed |
Evidence:
|
Identify site safety hazards and take corrective action to reduce injury to self and others Completed |
Evidence:
|
Identify other on-site characteristics for their impact on the installation process Completed |
Evidence:
|
Take accurate site measurements and confirm against job specification Completed |
Evidence:
|
Protect existing fixtures and fittings through the application of suitable coverings Completed |
Evidence:
|
Prepare frame and materials
|
|
Remove glass in accordance with safety requirements Completed |
Evidence:
|
Assess frame condition to ensure suitability for reglazing in accordance with Australian Standards Completed |
Evidence:
|
Report defective frames for repair or replacement in accordance with workplace procedures Completed |
Evidence:
|
Prepare frame to receive glass in accordance with specifications Completed |
Evidence:
|
Prepare fixing and sealing materials by mixing or cutting to length, in accordance with job requirements Completed |
Evidence:
|
Cut and fit glass
|
|
Safely cut glass using appropriate equipment in accordance with specific job requirements Completed |
Evidence:
|
Fix glass to the frame using the selected method in accordance with workplace procedures and Australian Standards Completed |
Evidence:
|
Use solvents and sealants in accordance with manufacturer recommendations and Australian Standards Completed |
Evidence:
|
Remove excess sealing material and clean glass and frame with suitable cleaning agents after fixing Completed |
Evidence:
|
Complete work
|
|
Check completed installation for compliance with customer requirements, specifications and Australian Standards Completed |
Evidence:
|
Clean and store tools, equipment and materials in accordance with workplace procedures Completed |
Evidence:
|
Clean work area and leave in a safe condition and dispose of waste or recycle in accordance with workplace protocols Completed |
Evidence:
|
Accurately complete required workplace documentation Completed |
Evidence:
|