NTISthis.com

Evidence Guide: MSFGG4004 - Perform laser measurement and levelling for glass windows and doors in buildings

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFGG4004 - Perform laser measurement and levelling for glass windows and doors in buildings

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for glass laser measurement and levelling

  1. Task requirements are determined by inspection of glass window and door components to be installed in a building and following relevant plans, drawings and texts in accordance with the work plan
  2. Appropriate laser levelling equipment for the installation job is selected and set up to manufacturer recommendations
  3. Levelling is planned in detail including sequencing and prioritising tasks and system requirements
  4. Potential hazards to personnel and other building components at the installation site are identified and prevention and/or control measures are selected in accordance with the work plan
  5. Individual’s roles and responsibilities within the installation team are identified, and where required, assisted with provision of on-the-job training for the tasks
Task requirements are determined by inspection of glass window and door components to be installed in a building and following relevant plans, drawings and texts in accordance with the work plan

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate laser levelling equipment for the installation job is selected and set up to manufacturer recommendations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Levelling is planned in detail including sequencing and prioritising tasks and system requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Potential hazards to personnel and other building components at the installation site are identified and prevention and/or control measures are selected in accordance with the work plan

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Individual’s roles and responsibilities within the installation team are identified, and where required, assisted with provision of on-the-job training for the tasks

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Use laser devices to make measurements

  1. Measurements are taken accurately, interpreted and recorded correctly to standard operating procedures
  2. Laser levelling devices are operated to manufacturer specifications or standard operating procedures
  3. Datum point is set up or located
  4. Readings are taken to datum and at nominated or selected stations, to project specifications
Measurements are taken accurately, interpreted and recorded correctly to standard operating procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Laser levelling devices are operated to manufacturer specifications or standard operating procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Datum point is set up or located

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Readings are taken to datum and at nominated or selected stations, to project specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Perform levelling

  1. Levelling realignment calculations are performed using correct and appropriate method for the installation levelling/alignment application
  2. Glass window and door components are levelled and aligned to specifications using correct and appropriate techniques, and adjustments made to ensure compliance with manufacturer specifications and the work plan
  3. Glass components are temporarily fixed in the assigned installation positions prior to final measurement
  4. Final level and alignment inspections are undertaken, any adjustments made and glass components fixed to the building using appropriate fasteners
Levelling realignment calculations are performed using correct and appropriate method for the installation levelling/alignment application

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Glass window and door components are levelled and aligned to specifications using correct and appropriate techniques, and adjustments made to ensure compliance with manufacturer specifications and the work plan

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Glass components are temporarily fixed in the assigned installation positions prior to final measurement

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Final level and alignment inspections are undertaken, any adjustments made and glass components fixed to the building using appropriate fasteners

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work

  1. Glass installation rating compliance certificate is completed
  2. Levelling equipment is closed own and appropriate personnel notified of completed installation in accordance with enterprise requirements
  3. Work area is cleared of waste, cleaned, restored and secured in accordance with site/enterprise procedures
  4. Plant, tools and equipment are maintained and stored in accordance with site/enterprise procedures
  5. Work completion details are finalised in accordance with enterprise procedures
Glass installation rating compliance certificate is completed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Levelling equipment is closed own and appropriate personnel notified of completed installation in accordance with enterprise requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleared of waste, cleaned, restored and secured in accordance with site/enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Plant, tools and equipment are maintained and stored in accordance with site/enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work completion details are finalised in accordance with enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for glass laser measurement and levelling

1.1

Task requirements are determined by inspection of glass window and door components to be installed in a building and following relevant plans, drawings and texts in accordance with the work plan

1.2

Appropriate laser levelling equipment for the installation job is selected and set up to manufacturer recommendations

1.3

Levelling is planned in detail including sequencing and prioritising tasks and system requirements

1.4

Potential hazards to personnel and other building components at the installation site are identified and prevention and/or control measures are selected in accordance with the work plan

1.5

Individual’s roles and responsibilities within the installation team are identified, and where required, assisted with provision of on-the-job training for the tasks

2

Use laser devices to make measurements

2.1

Measurements are taken accurately, interpreted and recorded correctly to standard operating procedures

2.2

Laser levelling devices are operated to manufacturer specifications or standard operating procedures

2.3

Datum point is set up or located

2.4

Readings are taken to datum and at nominated or selected stations, to project specifications

3

Perform levelling

3.1

Levelling realignment calculations are performed using correct and appropriate method for the installation levelling/alignment application

3.2

Glass window and door components are levelled and aligned to specifications using correct and appropriate techniques, and adjustments made to ensure compliance with manufacturer specifications and the work plan

3.3

Glass components are temporarily fixed in the assigned installation positions prior to final measurement

3.4

Final level and alignment inspections are undertaken, any adjustments made and glass components fixed to the building using appropriate fasteners

4

Complete work

4.1

Glass installation rating compliance certificate is completed

4.2

Levelling equipment is closed own and appropriate personnel notified of completed installation in accordance with enterprise requirements

4.3

Work area is cleared of waste, cleaned, restored and secured in accordance with site/enterprise procedures

4.4

Plant, tools and equipment are maintained and stored in accordance with site/enterprise procedures

4.5

Work completion details are finalised in accordance with enterprise procedures

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for glass laser measurement and levelling

1.1

Task requirements are determined by inspection of glass window and door components to be installed in a building and following relevant plans, drawings and texts in accordance with the work plan

1.2

Appropriate laser levelling equipment for the installation job is selected and set up to manufacturer recommendations

1.3

Levelling is planned in detail including sequencing and prioritising tasks and system requirements

1.4

Potential hazards to personnel and other building components at the installation site are identified and prevention and/or control measures are selected in accordance with the work plan

1.5

Individual’s roles and responsibilities within the installation team are identified, and where required, assisted with provision of on-the-job training for the tasks

2

Use laser devices to make measurements

2.1

Measurements are taken accurately, interpreted and recorded correctly to standard operating procedures

2.2

Laser levelling devices are operated to manufacturer specifications or standard operating procedures

2.3

Datum point is set up or located

2.4

Readings are taken to datum and at nominated or selected stations, to project specifications

3

Perform levelling

3.1

Levelling realignment calculations are performed using correct and appropriate method for the installation levelling/alignment application

3.2

Glass window and door components are levelled and aligned to specifications using correct and appropriate techniques, and adjustments made to ensure compliance with manufacturer specifications and the work plan

3.3

Glass components are temporarily fixed in the assigned installation positions prior to final measurement

3.4

Final level and alignment inspections are undertaken, any adjustments made and glass components fixed to the building using appropriate fasteners

4

Complete work

4.1

Glass installation rating compliance certificate is completed

4.2

Levelling equipment is closed own and appropriate personnel notified of completed installation in accordance with enterprise requirements

4.3

Work area is cleared of waste, cleaned, restored and secured in accordance with site/enterprise procedures

4.4

Plant, tools and equipment are maintained and stored in accordance with site/enterprise procedures

4.5

Work completion details are finalised in accordance with enterprise procedures

Accurately select, set and use laser levelling devices to obtain and interpret specified measurements

Maintain and store laser levelling devices

Read, interpret and follow information on standard operating procedures, manufacturer recommendations, drawings and other applicable reference documents

Set up levelling equipment and take levelling measurements and perform necessary calculations

Confirm accuracy of the readings taken, including set up and movement of laser levelling device in two locations

Level and align a range of glass window and door components for installation in buildings

Confirm work requirements and specifications and the report work outcomes and problems and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

AS 2047-2014 Windows in buildings - Selection and Installation

AS1288-2006 Glass in buildings - Selection and Installation

Note, wherever Australia Standards are listed they apply at the time of publication, but the most current version (including amendments) or replacement versions are to be used.

Terminology and concepts relating to electrical/electronic measurement

Specifications of a range of commonly used laser levelling devices and their features for application in the glass industry

Settings and the correct scale for each setting on laser levelling devices and procedures for obtaining accurate measurements

Levelling device types, characteristics, technical capabilities and limitations

Maintenance and storage requirements for a range of laser levelling devices

Principles of levelling and alignment and numerical operations, geometry and calculations/formulae for levelling

Effects on installed glass window and door components if not correctly levelled and aligned

Techniques, tools, equipment and procedures to carry out levelling and installation of glass components in buildings

Hazards and control measures associated with levelling and alignment and relevant safe work practices and procedures

Use and application of personal protective equipment

Relevant environmental, WHS legislation and regulations

Technical drawings and manufacturers manuals

Shimming and packing materials

Glass product specifications and tolerances

Hierarchy of control and basis of control for glass plant/s

Communication protocols (e.g. radio, phone, computer and paper, permissions/authorities)

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit scope includes:

implementation of procedures and techniques for the safe, effective and efficient management of laser levelling equipment used in installing glass windows and doors

the identification of viable options and the selection of options that best meet the required outcomes

working with others to undertake and complete the application of precise laser levelling during glass component installation in buildings

Work health and safety (WHS) requirements include:

Commonwealth, state or territory legislation and regulations

organisational safety policies and procedures

the use of personal protective equipment and clothing

firefighting equipment

first aid equipment

hazard and risk control and elimination of hazardous materials and substances

manual handling, including lifting and carrying

Procedures include:

work instructions

standard operating procedures

written, verbal or computer-based procedures

Organisational requirements include:

legal, organisational and site guidelines, policies and procedures relating to own role and responsibility

quality assurance

procedural manuals

quality and continuous improvement processes and standards

ethical standards

recording and reporting

access and equity principles and practices

equipment use, maintenance and storage

environmental management (waste disposal, recycling and re-use guidelines)

Equipment and tools include:

dumpy/optical level

rotating laser level

line and dot level

duel beam level

laser square level

other associated levelling and aligning equipment

Levelling and/or alignment procedures include:

face and rim, reverse indicator, use of jacking bolts and shimming material, and use of levelling equipment