The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for base assembly
|
|
Specifications are used to determine job requirements, including design, tolerances, process, materials, finish and quantity Completed |
Evidence:
|
Assembly sequence is planned Completed |
Evidence:
|
Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work Completed |
Evidence:
|
Procedures are determined for checking quality at each stage of the process Completed |
Evidence:
|
Fixing devices are selected in line with work instructions and type of materials to be joined Completed |
Evidence:
|
Components, hardware, fittings and attachments are collected Completed |
Evidence:
|
Tools and equipment suitable to the fixing method are selected and checked for safe operation Completed |
Evidence:
|
Appropriate jigs are selected Completed |
Evidence:
|
Assemble base components
|
|
Components are laid out and assembled using jigs and appropriate fastenings Completed |
Evidence:
|
Hand and/or power tools, equipment are used as required Completed |
Evidence:
|
Assembled base is checked for compliance with specifications Completed |
Evidence:
|
Spring grid/unit is attached to base Completed |
Evidence:
|
Fabric is upholstered to base according to specifications Completed |
Evidence:
|
Base is finished to eliminate all excess materials Completed |
Evidence:
|
Bases which do not meet quality specifications are repaired or tagged for further processing or recycling/disposal Completed |
Evidence:
|
Identify quality requirements
|
|
Process is monitored and conditions which may affect quality standards are noted Completed |
Evidence:
|
Variations to normal activities are reported in accordance with workplace procedures Completed |
Evidence:
|
Authorised changes in standard operating procedures and work order or instructions are implemented Completed |
Evidence:
|
Workplace required documentation is completed and stored following appropriate procedures Completed |
Evidence:
|
Clean work area/s and maintain equipment
|
|
Faulty and/or defective equipment is tagged and reported in accordance with WHS procedures Completed |
Evidence:
|
Waste and scrap is removed following workplace procedures Completed |
Evidence:
|
Tools and equipment used are cleaned, inspected for serviceable condition and stored appropriately in accordance with workplace procedures Completed |
Evidence:
|
Equipment and work area clean-up is maintained in accordance with workplace procedures Completed |
Evidence:
|