NTISthis.com

Evidence Guide: MSFMB2006 - Set up, operate and maintain a tape edging machine

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFMB2006 - Set up, operate and maintain a tape edging machine

What evidence can you provide to prove your understanding of each of the following citeria?

Plan work operations

  1. Work instructions are used to determine job requirements, including quality, materials, equipment and quantities
  2. Work health and safety (WHS) requirements, including personal protection needs, are observed through the work
  3. Material for processing is selected and inspected for quality
  4. Machine and the tape holder unit are identified and checked for safe and effective operation
  5. Procedures are determined for minimising waste material
  6. Procedures are identified for maximising energy efficiency while completing the job
Work instructions are used to determine job requirements, including quality, materials, equipment and quantities

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work health and safety (WHS) requirements, including personal protection needs, are observed through the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Material for processing is selected and inspected for quality

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machine and the tape holder unit are identified and checked for safe and effective operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Procedures are determined for minimising waste material

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Procedures are identified for maximising energy efficiency while completing the job

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set up machines

  1. Machine settings and adjustments are made in accordance with job requirements and machine and tool manufacturer instructions
  2. Trial runs are conducted to check machine operation, accuracy and quality of finished work
  3. Necessary adjustments are made to machine settings
Machine settings and adjustments are made in accordance with job requirements and machine and tool manufacturer instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trial runs are conducted to check machine operation, accuracy and quality of finished work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Necessary adjustments are made to machine settings

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete tape edging

  1. Machine start-up procedure is carried out in accordance with manufacturer instructions
  2. Material is fed into machine in accordance with manufacturer instructions, tooling requirements, safe handling procedures and standard workplace operating procedures
  3. Machine is operated in accordance with its designed capacity and purpose, and to manufacturer recommendations
  4. Machine operation, including inputs and outcomes, is monitored to ensure product quality and output
  5. Waste quantities are checked and minimised
  6. Items that do not meet quality requirements are repaired, recycled or discarded according to workplace procedures
  7. Problems with the required work or the operation of the machine are identified and reported to appropriate persons
Machine start-up procedure is carried out in accordance with manufacturer instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Material is fed into machine in accordance with manufacturer instructions, tooling requirements, safe handling procedures and standard workplace operating procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machine is operated in accordance with its designed capacity and purpose, and to manufacturer recommendations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machine operation, including inputs and outcomes, is monitored to ensure product quality and output

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Waste quantities are checked and minimised

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Items that do not meet quality requirements are repaired, recycled or discarded according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Problems with the required work or the operation of the machine are identified and reported to appropriate persons

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean up work area and maintain equipment

  1. Material that can be re-used is collected and stored
  2. Waste and scrap are removed following workplace procedures
  3. Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures
  4. Unserviceable equipment is tagged and faults identified in accordance with workplace procedures
  5. Operator maintenance is completed in accordance with manufacturer specifications and site procedures
Material that can be re-used is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Waste and scrap are removed following workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unserviceable equipment is tagged and faults identified in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operator maintenance is completed in accordance with manufacturer specifications and site procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan work operations

1.1

Work instructions are used to determine job requirements, including quality, materials, equipment and quantities

1.2

Work health and safety (WHS) requirements, including personal protection needs, are observed through the work

1.3

Material for processing is selected and inspected for quality

1.4

Machine and the tape holder unit are identified and checked for safe and effective operation

1.5

Procedures are determined for minimising waste material

1.6

Procedures are identified for maximising energy efficiency while completing the job

2

Set up machines

2.1

Machine settings and adjustments are made in accordance with job requirements and machine and tool manufacturer instructions

2.2

Trial runs are conducted to check machine operation, accuracy and quality of finished work

2.3

Necessary adjustments are made to machine settings

3

Complete tape edging

3.1

Machine start-up procedure is carried out in accordance with manufacturer instructions

3.2

Material is fed into machine in accordance with manufacturer instructions, tooling requirements, safe handling procedures and standard workplace operating procedures

3.3

Machine is operated in accordance with its designed capacity and purpose, and to manufacturer recommendations

3.4

Machine operation, including inputs and outcomes, is monitored to ensure product quality and output

3.5

Waste quantities are checked and minimised

3.6

Items that do not meet quality requirements are repaired, recycled or discarded according to workplace procedures

3.7

Problems with the required work or the operation of the machine are identified and reported to appropriate persons

4

Clean up work area and maintain equipment

4.1

Material that can be re-used is collected and stored

4.2

Waste and scrap are removed following workplace procedures

4.3

Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures

4.4

Unserviceable equipment is tagged and faults identified in accordance with workplace procedures

4.5

Operator maintenance is completed in accordance with manufacturer specifications and site procedures

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan work operations

1.1

Work instructions are used to determine job requirements, including quality, materials, equipment and quantities

1.2

Work health and safety (WHS) requirements, including personal protection needs, are observed through the work

1.3

Material for processing is selected and inspected for quality

1.4

Machine and the tape holder unit are identified and checked for safe and effective operation

1.5

Procedures are determined for minimising waste material

1.6

Procedures are identified for maximising energy efficiency while completing the job

2

Set up machines

2.1

Machine settings and adjustments are made in accordance with job requirements and machine and tool manufacturer instructions

2.2

Trial runs are conducted to check machine operation, accuracy and quality of finished work

2.3

Necessary adjustments are made to machine settings

3

Complete tape edging

3.1

Machine start-up procedure is carried out in accordance with manufacturer instructions

3.2

Material is fed into machine in accordance with manufacturer instructions, tooling requirements, safe handling procedures and standard workplace operating procedures

3.3

Machine is operated in accordance with its designed capacity and purpose, and to manufacturer recommendations

3.4

Machine operation, including inputs and outcomes, is monitored to ensure product quality and output

3.5

Waste quantities are checked and minimised

3.6

Items that do not meet quality requirements are repaired, recycled or discarded according to workplace procedures

3.7

Problems with the required work or the operation of the machine are identified and reported to appropriate persons

4

Clean up work area and maintain equipment

4.1

Material that can be re-used is collected and stored

4.2

Waste and scrap are removed following workplace procedures

4.3

Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures

4.4

Unserviceable equipment is tagged and faults identified in accordance with workplace procedures

4.5

Operator maintenance is completed in accordance with manufacturer specifications and site procedures

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Identify, set up and operate a semi-automated or automated tape edging machine and complete:

set up and application of at least one(1) edge treatment material

identification and correction of at least two (2) real or simulated machining faults

Conduct operator maintenance on the machine and equipment

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Types, characteristics, uses and limitations of the machines

Characteristics, uses and limitations of fabric and edging tape

Workplace guidelines regarding acceptable tolerance levels

Workplace safety policies and procedures

Procedures for reporting machinery faults and material defects

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate some discretion, judgement and problem solving

Tape edging machines include:

semi-automated

fully automated

Materials to be processed include:

plain and patterned quilted fabric

edging tape

Operator maintenance includes:

the cleaning and refurbishing of the tape edging head unit and tape holder

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies and practices

Information and procedures include:

workplace procedures relating to the use of tools and equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures