NTISthis.com

Evidence Guide: MSFPF2003 - Join mouldings

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFPF2003 - Join mouldings

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. Patterns, work instructions and/or plans are read and interpreted
  2. Work health safety (WHS) requirements relevant to the operation of joining mouldings, including personal protection needs, are observed throughout the work
  3. The process for obtaining materials/components and moving completed work to the next process is identified
  4. Required components, attachments, tools and equipment are identified
  5. Work sequence is planned to suit the job
Patterns, work instructions and/or plans are read and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work health safety (WHS) requirements relevant to the operation of joining mouldings, including personal protection needs, are observed throughout the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

The process for obtaining materials/components and moving completed work to the next process is identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Required components, attachments, tools and equipment are identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work sequence is planned to suit the job

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare for frame assembly

  1. Components of the frame are selected and checked against work instructions for size, number, pattern and finish profile
  2. Fixing and joining devices are selected in accordance with work instructions and type of moulding to be joined
  3. Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety
  4. Shortages/defective items are notified in accordance with workplace practices
Components of the frame are selected and checked against work instructions for size, number, pattern and finish profile

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fixing and joining devices are selected in accordance with work instructions and type of moulding to be joined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Shortages/defective items are notified in accordance with workplace practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assemble frame

  1. Components are laid out and joined using a jig (if required) and appropriate fastenings
  2. Assembled frame is checked for alignment, pattern matching (if appropriate), correct number and fitting of fasteners and other attachments and conformity to work instruction and quality requirements
  3. Corners are finished in accordance with workplace requirements
  4. Joined frames are stored according to workplace requirements
Components are laid out and joined using a jig (if required) and appropriate fastenings

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assembled frame is checked for alignment, pattern matching (if appropriate), correct number and fitting of fasteners and other attachments and conformity to work instruction and quality requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Corners are finished in accordance with workplace requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Joined frames are stored according to workplace requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work

  1. Completed frames are inspected for quality, with those not meeting specification being repaired or tagged for further processing or recycling/disposal
  2. Tools, equipment and unused materials are cleaned and stored following workplace procedures
  3. Equipment faults are identified, tagged and reported to appropriate personnel
  4. Work area is cleaned and rubbish disposed of as appropriate
  5. Workplace documentation is completed as required
Completed frames are inspected for quality, with those not meeting specification being repaired or tagged for further processing or recycling/disposal

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and unused materials are cleaned and stored following workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment faults are identified, tagged and reported to appropriate personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned and rubbish disposed of as appropriate

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is completed as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Patterns, work instructions and/or plans are read and interpreted

1.2

Work health safety (WHS) requirements relevant to the operation of joining mouldings, including personal protection needs, are observed throughout the work

1.3

The process for obtaining materials/components and moving completed work to the next process is identified

1.4

Required components, attachments, tools and equipment are identified

1.5

Work sequence is planned to suit the job

2

Prepare for frame assembly

2.1

Components of the frame are selected and checked against work instructions for size, number, pattern and finish profile

2.2

Fixing and joining devices are selected in accordance with work instructions and type of moulding to be joined

2.3

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

2.4

Shortages/defective items are notified in accordance with workplace practices

3

Assemble frame

3.1

Components are laid out and joined using a jig (if required) and appropriate fastenings

3.2

Assembled frame is checked for alignment, pattern matching (if appropriate), correct number and fitting of fasteners and other attachments and conformity to work instruction and quality requirements

3.3

Corners are finished in accordance with workplace requirements

3.4

Joined frames are stored according to workplace requirements

4

Complete work

4.1

Completed frames are inspected for quality, with those not meeting specification being repaired or tagged for further processing or recycling/disposal

4.2

Tools, equipment and unused materials are cleaned and stored following workplace procedures

4.3

Equipment faults are identified, tagged and reported to appropriate personnel

4.4

Work area is cleaned and rubbish disposed of as appropriate

4.5

Workplace documentation is completed as required

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Patterns, work instructions and/or plans are read and interpreted

1.2

Work health safety (WHS) requirements relevant to the operation of joining mouldings, including personal protection needs, are observed throughout the work

1.3

The process for obtaining materials/components and moving completed work to the next process is identified

1.4

Required components, attachments, tools and equipment are identified

1.5

Work sequence is planned to suit the job

2

Prepare for frame assembly

2.1

Components of the frame are selected and checked against work instructions for size, number, pattern and finish profile

2.2

Fixing and joining devices are selected in accordance with work instructions and type of moulding to be joined

2.3

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

2.4

Shortages/defective items are notified in accordance with workplace practices

3

Assemble frame

3.1

Components are laid out and joined using a jig (if required) and appropriate fastenings

3.2

Assembled frame is checked for alignment, pattern matching (if appropriate), correct number and fitting of fasteners and other attachments and conformity to work instruction and quality requirements

3.3

Corners are finished in accordance with workplace requirements

3.4

Joined frames are stored according to workplace requirements

4

Complete work

4.1

Completed frames are inspected for quality, with those not meeting specification being repaired or tagged for further processing or recycling/disposal

4.2

Tools, equipment and unused materials are cleaned and stored following workplace procedures

4.3

Equipment faults are identified, tagged and reported to appropriate personnel

4.4

Work area is cleaned and rubbish disposed of as appropriate

4.5

Workplace documentation is completed as required

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Join each of the following frames (at least one of them being a multi-angle frame) up to a width of 100 mm:

synthetic

timber

aluminium

and each in the following profiles:

flat

traditional

reverse

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Type, characteristics, uses and limitations of moulding materials

Workplace safety system requirements related to joining picture frame mouldings

Work flow in relation to frame production

Operation of tools and equipment used in the assembly process

Identification of equipment, processes and procedures

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate some discretion, judgement and problem solving

Patterns and work instructions include:

the size of the frames

types of attachments to be used

required materials and tools

quality requirements for the frames

the assembly steps and sequence

Tools and equipment include:

underpinners (pneumatic or power V-nailer)

V-nails

drill

nail punch

screwdrivers

touch-up material

glues and finishing tools

files

sandpaper

jigs

Moulding materials include:

solid timber

composites

metal and alloy extrusion

synthetics

filler

putties

touch-up pens

paints/stains

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies:

gloves

safety glasses

gauntlets

footwear

earmuffs

aprons and overalls

Information and procedures include:

workplace procedures relating to the use of tools and equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures