NTISthis.com

Evidence Guide: MSFPF2008 - Recognise and repair finishes of framing materials

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFPF2008 - Recognise and repair finishes of framing materials

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. The composition and finish of damaged framing materials is identified and viability/feasibility of effecting repair determined
  2. Repairs to be effected are identified from work/job instructions or as a result of inspection of framing materials
  3. Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  4. Repair requirements and procedures are identified from drawings/specifications and workplace procedures
  5. Work sequence is planned to suit the job
  6. Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety
The composition and finish of damaged framing materials is identified and viability/feasibility of effecting repair determined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repairs to be effected are identified from work/job instructions or as a result of inspection of framing materials

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair requirements and procedures are identified from drawings/specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work sequence is planned to suit the job

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair framing materials

  1. Fillers and abrasive agents are used to remove/fill holes and other blemishes in materials
  2. Other defects are repaired in accordance with workplace procedures
  3. Colours are matched to suit existing finish of materials
  4. Finishes are applied to materials in accordance with workplace procedures
  5. Problems occurring during repairs are identified and reported to appropriate persons
  6. Repaired material is inspected to ensure best possible match to existing finish and either stored, returned for further repair or scrapped in accordance with workplace procedures
Fillers and abrasive agents are used to remove/fill holes and other blemishes in materials

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Other defects are repaired in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Colours are matched to suit existing finish of materials

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Finishes are applied to materials in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Problems occurring during repairs are identified and reported to appropriate persons

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repaired material is inspected to ensure best possible match to existing finish and either stored, returned for further repair or scrapped in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work

  1. Work area is cleaned and rubbish disposed of as appropriate
  2. Workplace documentation is completed as required
  3. Tools, equipment and unused materials are cleaned and stored following workplace procedures
Work area is cleaned and rubbish disposed of as appropriate

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is completed as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and unused materials are cleaned and stored following workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

The composition and finish of damaged framing materials is identified and viability/feasibility of effecting repair determined

1.2

Repairs to be effected are identified from work/job instructions or as a result of inspection of framing materials

1.3

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

1.4

Repair requirements and procedures are identified from drawings/specifications and workplace procedures

1.5

Work sequence is planned to suit the job

1.6

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

2

Repair framing materials

2.1

Fillers and abrasive agents are used to remove/fill holes and other blemishes in materials

2.2

Other defects are repaired in accordance with workplace procedures

2.3

Colours are matched to suit existing finish of materials

2.4

Finishes are applied to materials in accordance with workplace procedures

2.5

Problems occurring during repairs are identified and reported to appropriate persons

2.6

Repaired material is inspected to ensure best possible match to existing finish and either stored, returned for further repair or scrapped in accordance with workplace procedures

3

Complete work

3.1

Work area is cleaned and rubbish disposed of as appropriate

3.2

Workplace documentation is completed as required

3.3

Tools, equipment and unused materials are cleaned and stored following workplace procedures

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

The composition and finish of damaged framing materials is identified and viability/feasibility of effecting repair determined

1.2

Repairs to be effected are identified from work/job instructions or as a result of inspection of framing materials

1.3

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

1.4

Repair requirements and procedures are identified from drawings/specifications and workplace procedures

1.5

Work sequence is planned to suit the job

1.6

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

2

Repair framing materials

2.1

Fillers and abrasive agents are used to remove/fill holes and other blemishes in materials

2.2

Other defects are repaired in accordance with workplace procedures

2.3

Colours are matched to suit existing finish of materials

2.4

Finishes are applied to materials in accordance with workplace procedures

2.5

Problems occurring during repairs are identified and reported to appropriate persons

2.6

Repaired material is inspected to ensure best possible match to existing finish and either stored, returned for further repair or scrapped in accordance with workplace procedures

3

Complete work

3.1

Work area is cleaned and rubbish disposed of as appropriate

3.2

Workplace documentation is completed as required

3.3

Tools, equipment and unused materials are cleaned and stored following workplace procedures

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Identify the finish and effect the repair of at least five (5) different damaged items of picture framing materials

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Type, characteristics, uses and limitations of framing materials

The nature of defects in the finish of framing materials and their method of repair

Types, uses and operation of tools and equipment

Finishes to framing materials and colour matching

Workplace safety system requirements related to repairing finishes to framing materials

Work flow in relation to repair of framing material finishes

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate some discretion, judgement and problem solving

Framing materials include:

picture frame mouldings

mat boards

perspex

glass

mirrors

Mouldings include:

solid timber

composites

metal and alloy extrusions

synthetics

Defects in framing materials include:

nail/pin holes

splits and cracks

worn finishes and dents/bruises

(defects may occur in mouldings or existing frames)

Finishes include:

painted surfaces

schalag metal

gesso

gold leaf gilding

shellac and stained finish

Repair processes include:

filling

rectification of dents and bruises

replacement of damaged components and touch-up colour/finish

(repairs may be effected in new materials or existing frames)

Tools and equipment include:

hammers

planes

chisels

filler blades

brushes and clamps

sanders

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies:

safety glasses

safety footwear

ear protection

dust mask/respirator

Information and procedures include:

workplace procedures relating to the use of tools and equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures