NTISthis.com

Evidence Guide: MSFSF2002 - Machine sew materials

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSFSF2002 - Machine sew materials

What evidence can you provide to prove your understanding of each of the following citeria?

Identify sewing machine equipment controls and procedures

  1. Job requirements are identified from work instructions
  2. Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work
  3. Equipment components, equipment condition and controls are identified
  4. Operating procedures are checked to identify any approved adjustments
  5. Equipment operations and production procedures are identified
  6. The process for obtaining materials and moving products to the next process is identified
Job requirements are identified from work instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment components, equipment condition and controls are identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operating procedures are checked to identify any approved adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment operations and production procedures are identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

The process for obtaining materials and moving products to the next process is identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare for work

  1. Work order or sample is checked to identify sewing specifications
  2. Required materials, tools and equipment are assembled
  3. Materials and equipment are inspected and any faults are identified and reported
  4. Work sequence is planned to suit job, and materials are laid out
  5. If required, naps, pattern direction and face side of materials are identified
  6. Components are matched and secured with tacking, pins or adhesives as required
  7. Any required supplementary equipment is identified for routine lubrication and adjustments
Work order or sample is checked to identify sewing specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Required materials, tools and equipment are assembled

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials and equipment are inspected and any faults are identified and reported

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work sequence is planned to suit job, and materials are laid out

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

If required, naps, pattern direction and face side of materials are identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Components are matched and secured with tacking, pins or adhesives as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Any required supplementary equipment is identified for routine lubrication and adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set up and control sewing machine operations

  1. Sewing machine is set up and adjusted
  2. Sewing operation is according to workplace procedures and material characteristics
  3. Required product quality and outputs are maintained
Sewing machine is set up and adjusted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Sewing operation is according to workplace procedures and material characteristics

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Required product quality and outputs are maintained

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintain quality requirements

  1. Machining process is monitored and conditions which may affect work quality are reported
  2. Authorised changes in operating procedures are implemented
Machining process is monitored and conditions which may affect work quality are reported

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Authorised changes in operating procedures are implemented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Finish and despatch work

  1. Completed work is checked for required quality, finished as required, and repaired, where applicable, before moving to the next process
  2. Material which is able to be re-used is collected and stored
  3. Equipment and work area clean up and waste management are completed following workplace procedures
  4. Workplace records are completed as required
Completed work is checked for required quality, finished as required, and repaired, where applicable, before moving to the next process

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Material which is able to be re-used is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment and work area clean up and waste management are completed following workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace records are completed as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Identify sewing machine equipment controls and procedures

1.1

Job requirements are identified from work instructions

1.2

Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work

1.3

Equipment components, equipment condition and controls are identified

1.4

Operating procedures are checked to identify any approved adjustments

1.5

Equipment operations and production procedures are identified

1.6

The process for obtaining materials and moving products to the next process is identified

2

Prepare for work

2.1

Work order or sample is checked to identify sewing specifications

2.2

Required materials, tools and equipment are assembled

2.3

Materials and equipment are inspected and any faults are identified and reported

2.4

Work sequence is planned to suit job, and materials are laid out

2.5

If required, naps, pattern direction and face side of materials are identified

2.6

Components are matched and secured with tacking, pins or adhesives as required

2.7

Any required supplementary equipment is identified for routine lubrication and adjustments

3

Set up and control sewing machine operations

3.1

Sewing machine is set up and adjusted

3.2

Sewing operation is according to workplace procedures and material characteristics

3.3

Required product quality and outputs are maintained

4

Maintain quality requirements

4.1

Machining process is monitored and conditions which may affect work quality are reported

4.2

Authorised changes in operating procedures are implemented

5

Finish and despatch work

5.1

Completed work is checked for required quality, finished as required, and repaired, where applicable, before moving to the next process

5.2

Material which is able to be re-used is collected and stored

5.3

Equipment and work area clean up and waste management are completed following workplace procedures

5.4

Workplace records are completed as required

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Identify sewing machine equipment controls and procedures

1.1

Job requirements are identified from work instructions

1.2

Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work

1.3

Equipment components, equipment condition and controls are identified

1.4

Operating procedures are checked to identify any approved adjustments

1.5

Equipment operations and production procedures are identified

1.6

The process for obtaining materials and moving products to the next process is identified

2

Prepare for work

2.1

Work order or sample is checked to identify sewing specifications

2.2

Required materials, tools and equipment are assembled

2.3

Materials and equipment are inspected and any faults are identified and reported

2.4

Work sequence is planned to suit job, and materials are laid out

2.5

If required, naps, pattern direction and face side of materials are identified

2.6

Components are matched and secured with tacking, pins or adhesives as required

2.7

Any required supplementary equipment is identified for routine lubrication and adjustments

3

Set up and control sewing machine operations

3.1

Sewing machine is set up and adjusted

3.2

Sewing operation is according to workplace procedures and material characteristics

3.3

Required product quality and outputs are maintained

4

Maintain quality requirements

4.1

Machining process is monitored and conditions which may affect work quality are reported

4.2

Authorised changes in operating procedures are implemented

5

Finish and despatch work

5.1

Completed work is checked for required quality, finished as required, and repaired, where applicable, before moving to the next process

5.2

Material which is able to be re-used is collected and stored

5.3

Equipment and work area clean up and waste management are completed following workplace procedures

5.4

Workplace records are completed as required

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Identify and operate three (3) types of industrial sewing machines, including set up of the sewing machine for operation and monitoring the quality of output

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Types, characteristics, uses and limitations of sewing machines

Characteristics of materials used and finished products

Safety and environmental aspects of sewing machine operations

Quality systems and standards for soft furnishings

Work flow requirements for sewing process

Operation of work systems and industrial sewing equipment

Causes of faults and repair methods in soft furnishing machining

Procedure for reporting damaged or imperfect products or interruptions to work flow

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate some discretion, judgement and problem solving

Sewing specifications include:

required materials

threads and additional work features

seam and stitch specifications

any special stitch requirements and allowances

shape characteristics and special requirements

needles

attachments and ancillary equipment

quality requirements

Sewing products include:

top stitching

gathering

piping

braid

fringe

flange cords

straight fabric lengths

padded material

loose covers

Sewing processes include:

hemming

seams

machine tacking

gathering

multiple-layer sewing

straight or zig zag sewing

Machines include:

single or multi-needle flat bed

overlocker

blind hemming

gathering

flange

bar tacking

tape edging

Sewing machine set-up and adjustment includes:

thread machine and wind bobbin as required

set required tensions

select required machine settings

test operations for work order requirements

Materials to be machined include:

plain fabrics

patterned fabrics

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies and practices

Information and procedures include:

workplace procedures relating to the use of tools and equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures