The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare items for calibration
|
|
Select the authorised calibration procedure in accordance with enterprise procedures Completed |
Evidence:
|
Identify hazards and use appropriate personal protective equipment, safety equipment and procedures Completed |
Evidence:
|
Confirm all measuring equipment meets the laboratory's specification requirements and complies fully with the calibration procedure Completed |
Evidence:
|
Assemble and set up specified reference standards and associated equipment prior to testing Completed |
Evidence:
|
Verify performance of reference standards and measuring equipment prior to use and adjust or calibrate as necessary Completed |
Evidence:
|
Identify and minimise potential sources of measurement error Completed |
Evidence:
|
Perform calibration
|
|
Perform individual tests without variance according to the documented procedure to ensure repeatability of measurement Completed |
Evidence:
|
Confirm readings are the result of a valid measurement and record data as required (as-found or before adjustment) Completed |
Evidence:
|
Adjust device under test to bring readings within specification and record data (as-left or after adjustment) if required Completed |
Evidence:
|
Analyse resulting test data to detect trends or inconsistencies that would significantly affect the accuracy or validity of test results Completed |
Evidence:
|
Seek appropriate advice when interpretation of results is outside authorised scope of approval Completed |
Evidence:
|
Document results
|
|
Document compliance/non-compliance with requirements of test and/or specifications Completed |
Evidence:
|
Estimate and document uncertainty of measurement in accordance with enterprise procedures, if required Completed |
Evidence:
|
Record the results of each test/calibration accurately, unambiguously and objectively Completed |
Evidence:
|
Ensure confidentiality of enterprise information Completed |
Evidence:
|
Finalise calibration
|
|
Prepare and issue a final report on the job/item detailing testing carried out, traceability, statement of compliance and relevant information as required Completed |
Evidence:
|
Report any non-compliance and verify next course of action with supervisor Completed |
Evidence:
|
Attach calibration labels, equipment stickers, quality control tags and tamper resistant seals as required in enterprise procedures Completed |
Evidence:
|
Store test equipment/measurement standards and results in accordance with enterprise procedures Completed |
Evidence:
|