The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Interpret and schedule test requirements
|
|
Review test request to identify samples to be tested, test method and equipment involved Completed |
Evidence:
|
Identify hazards and workplace control measures associated with the sample, preparation and test methods, reagents and/or equipment Completed |
Evidence:
|
Plan work sequences to optimise throughput of multiple samples Completed |
Evidence:
|
Receive and prepare samples
|
|
Register samples in accordance with workplace procedures, recording details that allow accurate tracking and chain of custody traceable to employee Completed |
Evidence:
|
Match sample provided to accompanying documentation and report any discrepancies in accordance with workplace procedures Completed |
Evidence:
|
Prepare samples and standards in accordance with chemical testing requirements Completed |
Evidence:
|
Check equipment before use
|
|
Set up equipment and instruments in accordance with test method requirements Completed |
Evidence:
|
Perform pre-use and safety checks in accordance with workplace procedures Completed |
Evidence:
|
Check equipment calibration using specified standards and procedures Completed |
Evidence:
|
Inspect reagents required for quality issues including visual checks and expiry Completed |
Evidence:
|
Maintain equipment log in accordance with workplace procedures Completed |
Evidence:
|
Test samples to determine chemical species or properties
|
|
Operate equipment and instruments in accordance with test method requirements Completed |
Evidence:
|
Perform tests or procedures on all samples and standards in accordance with specified methods Completed |
Evidence:
|
Shut down equipment and instruments in accordance with operating procedures Completed |
Evidence:
|
Process, interpret and record data
|
|
Record test data noting atypical observations and anomalies Completed |
Evidence:
|
Interpret calibration graphs and compute results for all samples from these graphs Completed |
Evidence:
|
Check calculated values for consistency with expectations Completed |
Evidence:
|
Record data and results in accordance with workplace procedures Completed |
Evidence:
|
Determine if obvious procedure or equipment problems have led to atypical data or results Completed |
Evidence:
|
Follow procedures to ensure traceability of sample from receipt to reporting of results Completed |
Evidence:
|
Maintain a safe work environment
|
|
Use established safe work practices and personal protective equipment (PPE) to ensure personal safety and that of other laboratory personnel Completed |
Evidence:
|
Minimise the generation of wastes and environmental impacts Completed |
Evidence:
|
Safely collect and dispose of laboratory and hazardous waste Completed |
Evidence:
|
Care for and store equipment and reagents in accordance with workplace procedures Completed |
Evidence:
|