The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Perform analysis
|
|
Measure analyte response for standards, validation checks and samples Completed |
Evidence:
|
Conduct sufficient measurements to obtain reliable data Completed |
Evidence:
|
Return instruments to standby or shutdown condition Completed |
Evidence:
|
Store unused/prepared laboratory samples for future reference Completed |
Evidence:
|
Establish client needs and schedule analysis
|
|
Liaise with client or sample provider to determine client needs and sample history Completed |
Evidence:
|
Record sample description, compare with specification and record and report discrepancies |
|
Completed |
Evidence:
|
Identify non-routine samples and the possible need to vary workplace procedures |
|
Completed |
Evidence:
|
Confirm any proposed variations and document approved changes |
|
Completed |
Evidence:
|
Schedule analysis using workplace procedures |
|
Completed |
Evidence:
|
Prepare samples and standards
|
|
Obtain a representative analytical portion of the laboratory sample Completed |
Evidence:
|
Prepare sample in accordance with testing requirements |
|
Completed |
Evidence:
|
Prepare validation checks and/or calibration standards for analytical portion |
|
Completed |
Evidence:
|
Use specialised procedures for ultra-trace sample and standard preparation |
|
Completed |
Evidence:
|
Set up and optimise instrument
|
|
Perform pre-use and safety checks using workplace procedures Completed |
Evidence:
|
Start up and condition the instrument using workplace procedures |
|
Completed |
Evidence:
|
Optimise instrumental parameters to suit sample and test requirements |
|
Completed |
Evidence:
|
Check calibration status of instrument and perform calibration using specified standards and procedures |
|
Completed |
Evidence:
|
Clean, care for and store equipment and consumables in accordance with workplace procedures
|
|
Measure analyte response for standards, validation checks and samples Completed |
Evidence:
|
Conduct sufficient measurements to obtain reliable data |
|
Completed |
Evidence:
|
Return instruments to standby or shutdown condition |
|
Completed |
Evidence:
|
Store unused/prepared laboratory samples for future reference |
|
Completed |
Evidence:
|
Process and analyse data
|
|
Use controls and reference standards to confirm the integrity of biomolecular sample preparation and procedures Completed |
Evidence:
|
Troubleshoot basic procedure, reagent or equipment problems which have led to atypical data or results |
|
Completed |
Evidence:
|
Maintain laboratory records
|
|
Make entries on report forms or into a laboratory information management system accurately calculating, recording or transcribing data as required Completed |
Evidence:
|
Ensure traceability of sample from receipt to reporting of results |
|
Completed |
Evidence:
|