NTISthis.com

Evidence Guide: MSL975070 - Apply routine electrometric techniques

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSL975070 - Apply routine electrometric techniques

What evidence can you provide to prove your understanding of each of the following citeria?

Establish client needs

  1. Liaise with client or sample provider to determine client needs and sample history
  2. Match sample provided to accompanying documentation and report any discrepancies in accordance with workplace procedures
  3. Identify non-routine samples and the possible need to vary workplace procedures
  4. Seek advice from supervisor about any proposed variations and document all approved changes
Liaise with client or sample provider to determine client needs and sample history

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Match sample provided to accompanying documentation and report any discrepancies in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify non-routine samples and the possible need to vary workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Seek advice from supervisor about any proposed variations and document all approved changes

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare samples and standards

  1. Obtain a representative analytical portion of the laboratory sample
  2. Prepare sample in accordance with testing requirements
  3. Prepare validation checks for analytical portion
Obtain a representative analytical portion of the laboratory sample

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare sample in accordance with testing requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare validation checks for analytical portion

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set up and optimise instrument

  1. Perform pre-use and safety checks in accordance with workplace procedures
  2. Start up and condition the instrument in accordance with workplace procedures
  3. Optimise instrumental parameters to suit sample and test requirements
  4. Check calibration status of instrument and perform any required calibration using specified standards and procedures,
  5. Clean, care for and store equipment and consumables in accordance with workplace procedures
  6. Measure analyte response for standards, validation checks and samples
  7. Conduct sufficient measurements to obtain reliable data
  8. Return instruments to standby or shutdown condition in accordance with workplace procedures
Perform pre-use and safety checks in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Start up and condition the instrument in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Optimise instrumental parameters to suit sample and test requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check calibration status of instrument and perform any required calibration using specified standards and procedures,

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean, care for and store equipment and consumables in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Measure analyte response for standards, validation checks and samples

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct sufficient measurements to obtain reliable data

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Return instruments to standby or shutdown condition in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Process, analyse and record data

  1. Use controls and reference standards to confirm the integrity of sample preparation and procedures
  2. Troubleshoot basic procedure, reagent or equipment problems which have led to atypical data or results
  3. Record and/or check data in accordance with workplace procedures
  4. Follow procedures to ensure traceability of sample from receipt to reporting of results
Use controls and reference standards to confirm the integrity of sample preparation and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Troubleshoot basic procedure, reagent or equipment problems which have led to atypical data or results

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Record and/or check data in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Follow procedures to ensure traceability of sample from receipt to reporting of results

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge