The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Assemble and prepare the mould or former
|
|
Establish and maintain a safe working environment according to procedures Completed |
Evidence:
|
Identify and prepare appropriate mould or former Completed |
Evidence:
|
Level and secure the mould or former Completed |
Evidence:
|
Check that the base is stabilised and correctly mounted as required to facilitate rolling or turning out Completed |
Evidence:
|
Position inserts or loose pieces Completed |
Evidence:
|
Apply the correct stripping agent Completed |
Evidence:
|
Mould materials
|
|
Prepare the material mix or obtain the material from the batch preparation unit according to specifications Completed |
Evidence:
|
Provide an adequate supply of material to meet production requirements Completed |
Evidence:
|
Introduce material to the work piece cavity and compact according to procedures Completed |
Evidence:
|
Check inserts or loose pieces and secure to avoid movement during moulding Completed |
Evidence:
|
Roll and strip or turn out the component for finishing Completed |
Evidence:
|
Finish the component or product
|
|
Repair defects occurring during the moulding process Completed |
Evidence:
|
Remove inserts or loose pieces and replace in mould or former Completed |
Evidence:
|
Prepare the surface of the component for the application of any surface finishes Completed |
Evidence:
|
Cure or dry the components to specification Completed |
Evidence:
|
Return mould and/or segments for re-use or storage Completed |
Evidence:
|
Inspect and store components
|
|
Inspect component for defects Completed |
Evidence:
|
Store the component to specifications and procedures Completed |
Evidence:
|
Rectify routine problems
|
|
Identify and rectify faults and equipment failure Completed |
Evidence:
|
Maintain records and log books of equipment operations Completed |
Evidence:
|
Identify non-routine problems and report to designated person Completed |
Evidence:
|
Identify hazards
|
|
Identify hand moulding hazards Completed |
Evidence:
|
Implement hazard controls according to procedures Completed |
Evidence:
|
Report safety concerns according to procedures Completed |
Evidence:
|