NTISthis.com

Evidence Guide: MSTHL2008 - Use drum or vessel to crust hides, skins or leather

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

MSTHL2008 - Use drum or vessel to crust hides, skins or leather

What evidence can you provide to prove your understanding of each of the following citeria?

Determine job requirements

  1. Follow standard operating procedures (SOPs)
  2. Comply with work health and safety (WHS) requirements at all times
  3. Use appropriate personal protective equipment (PPE) in accordance with SOPs
  4. Identify job requirements from specifications, job sheets or work instructions
Follow standard operating procedures (SOPs)

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Comply with work health and safety (WHS) requirements at all times

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Use appropriate personal protective equipment (PPE) in accordance with SOPs

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify job requirements from specifications, job sheets or work instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare and load drum or vessel

  1. Determine drum or vessel loads and batches by counting, weight, volume or other defined method
  2. Assemble and make ready hides, skins or leathers to be dyed or treated to be loaded into drum or vessel
  3. Use relevant manual handling procedures to load drum or vessel with hides, skins or leather
Determine drum or vessel loads and batches by counting, weight, volume or other defined method

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assemble and make ready hides, skins or leathers to be dyed or treated to be loaded into drum or vessel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Use relevant manual handling procedures to load drum or vessel with hides, skins or leather

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Use drum or vessel to crust hides, skins or leather

  1. Assess between load service of equipment in accordance with manufacturer and workplace procedures
  2. Assess preparation and filling of drum or vessel
  3. Select and use formulations or additives, as required
  4. Operate and use drum or vessel in accordance with operator instructions and SOPs
  5. Follow schedules for the particular process
Assess between load service of equipment in accordance with manufacturer and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assess preparation and filling of drum or vessel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select and use formulations or additives, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operate and use drum or vessel in accordance with operator instructions and SOPs

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Follow schedules for the particular process

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor drum or vessel process

  1. Check and monitor drum or vessel use for correct function
  2. Monitor process parameters in terms of temperature, time and chemical values
  3. Recognise, isolate and report any deviations from normal
Check and monitor drum or vessel use for correct function

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor process parameters in terms of temperature, time and chemical values

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Recognise, isolate and report any deviations from normal

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unload drum or vessel

  1. Unload hides, skins or leather using correct manual handling techniques, where required
  2. Rack or direct hides, skins or leather to correct area for next process
  3. Control handling of process liquid or effluent in accordance with environmental and workplace procedures
Unload hides, skins or leather using correct manual handling techniques, where required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Rack or direct hides, skins or leather to correct area for next process

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Control handling of process liquid or effluent in accordance with environmental and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintain records

  1. Maintain workplace documentation, as required
  2. Complete records in accordance with workplace procedures, as required
Maintain workplace documentation, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete records in accordance with workplace procedures, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Determine job requirements

1.1

Follow standard operating procedures (SOPs)

1.2

Comply with work health and safety (WHS) requirements at all times

1.3

Use appropriate personal protective equipment (PPE) in accordance with SOPs

1.4

Identify job requirements from specifications, job sheets or work instructions

2

Prepare and load drum or vessel

2.1

Determine drum or vessel loads and batches by counting, weight, volume or other defined method

2.2

Assemble and make ready hides, skins or leathers to be dyed or treated to be loaded into drum or vessel

2.3

Use relevant manual handling procedures to load drum or vessel with hides, skins or leather

3

Use drum or vessel to crust hides, skins or leather

3.1

Assess between load service of equipment in accordance with manufacturer and workplace procedures

3.2

Assess preparation and filling of drum or vessel

3.3

Select and use formulations or additives, as required

3.4

Operate and use drum or vessel in accordance with operator instructions and SOPs

3.5

Follow schedules for the particular process

4

Monitor drum or vessel process

4.1

Check and monitor drum or vessel use for correct function

4.2

Monitor process parameters in terms of temperature, time and chemical values

4.3

Recognise, isolate and report any deviations from normal

5

Unload drum or vessel

5.1

Unload hides, skins or leather using correct manual handling techniques, where required

5.2

Rack or direct hides, skins or leather to correct area for next process

5.3

Control handling of process liquid or effluent in accordance with environmental and workplace procedures

6

Maintain records

6.1

Maintain workplace documentation, as required

6.2

Complete records in accordance with workplace procedures, as required

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Determine job requirements

1.1

Follow standard operating procedures (SOPs)

1.2

Comply with work health and safety (WHS) requirements at all times

1.3

Use appropriate personal protective equipment (PPE) in accordance with SOPs

1.4

Identify job requirements from specifications, job sheets or work instructions

2

Prepare and load drum or vessel

2.1

Determine drum or vessel loads and batches by counting, weight, volume or other defined method

2.2

Assemble and make ready hides, skins or leathers to be dyed or treated to be loaded into drum or vessel

2.3

Use relevant manual handling procedures to load drum or vessel with hides, skins or leather

3

Use drum or vessel to crust hides, skins or leather

3.1

Assess between load service of equipment in accordance with manufacturer and workplace procedures

3.2

Assess preparation and filling of drum or vessel

3.3

Select and use formulations or additives, as required

3.4

Operate and use drum or vessel in accordance with operator instructions and SOPs

3.5

Follow schedules for the particular process

4

Monitor drum or vessel process

4.1

Check and monitor drum or vessel use for correct function

4.2

Monitor process parameters in terms of temperature, time and chemical values

4.3

Recognise, isolate and report any deviations from normal

5

Unload drum or vessel

5.1

Unload hides, skins or leather using correct manual handling techniques, where required

5.2

Rack or direct hides, skins or leather to correct area for next process

5.3

Control handling of process liquid or effluent in accordance with environmental and workplace procedures

6

Maintain records

6.1

Maintain workplace documentation, as required

6.2

Complete records in accordance with workplace procedures, as required

Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria, and include:

reading and following work instructions, standard operating procedures (SOPs), safe work practices, industry codes and standards

determining loads and batches and load drum or vessel

carrying out between load servicing, filling drum and vessel and adding dyes, formulations and additives

operating and using drum or vessel and following schedules for a particular process according to operator instructions and SOPs, on at least two (2) occasions

checking and monitoring correct function and process parameters ensuring product meets specifications

recognising and isolating deviations from normal in accordance with procedures

controlling handling of process liquid or effluent in accordance with environmental and workplace procedures

loading and unloading hides ,skins or leather using relevant manual handling techniques

maintaining accurate records.

Evidence must be provided that demonstrates knowledge of:

safe work practices and procedures and use of personal protective equipment (PPE)

relevant Australian Standards

industry and product processes and equipment

procedures and requirements for preparation and loading

characteristics, hazards and applications of dyes, formulations and additives used in crusting process

monitoring processes and operator instructions

quality standards and manual handling procedures

work health and safety (WHS) and environmental aspects of relevant processes, including effluent handling and disposal

relevant federal and state or territory legislative or regulatory requirements

recording and reporting procedures.

Range Statement

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Workplace procedures include one or more of the following:

requirements prescribed by legislation, industry codes and standards, awards, agreements and conditions of employment

SOPs

work instructions

oral, written and visual communication

quality practices, including responsibility for maintenance of own work quality and contribution to quality improvement of team or section output

housekeeping

tasks related to environmental protection, waste disposal, pollution control and recycling

WHS practices

Australian Standards include:

the relevant industry or Australian Standards that are current at the time this unit is being undertaken

Hides and skins preparation includes one or more of the following:

washing

neutralising

retanning

dyeing

fat liquoring

fixing

Equipment includes one or more of the following

electronic monitoring and metering systems

manual chart recording systems

basic hand tools

laboratory testing and sampling equipment

Preparation methods include one or more of the following

counting

weight

volume

other defined method

WHS practices include:

WHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and include one or more of the following:

manual handling techniques

PPE

safe materials handling

ergonomic arrangement of workplaces

following marked walkways

safe storage of equipment

housekeeping

reporting accidents and incidents

other WHS practices relevant to the job and enterprise