The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for work
|
|
Identify work requirements Completed |
Evidence:
|
Identify and control hazards Completed |
Evidence:
|
Coordinate with appropriate personnel Completed |
Evidence:
|
Determine appropriate route/schedule for day's work Completed |
Evidence:
|
Monitor site, plant and equipment
|
|
Complete site checks Completed |
Evidence:
|
Use well control systems Completed |
Evidence:
|
Take required readings Completed |
Evidence:
|
Complete required lease maintenance Completed |
Evidence:
|
Operate well/system
|
|
Take appropriate action based on checks/readings made Completed |
Evidence:
|
Read and interpret well fluid levels Completed |
Evidence:
|
Adjust pump speed as required Completed |
Evidence:
|
Check meter readings validity as required Completed |
Evidence:
|
Complete required process related calculations Completed |
Evidence:
|
Recognise equipment/system faults and report as required Completed |
Evidence:
|
Adjust well/system as required by operational or other requirements Completed |
Evidence:
|
Complete logs and reports as required Completed |
Evidence:
|
Start up well/system
|
|
Perform pre-start up checks Completed |
Evidence:
|
Correctly sequence all required equipment/plant/systems Completed |
Evidence:
|
Bring equipment/plant/systems into operation as required Completed |
Evidence:
|
Monitor critical variables during start-up and make adjustments as required Completed |
Evidence:
|
Bring to required steady operating conditions smoothly and in an appropriate time Completed |
Evidence:
|
Shut down well/ system
|
|
Determine type of shutdown required Completed |
Evidence:
|
Give advanced warning of shutdown where possible Completed |
Evidence:
|
Shut down individual items and/or the entire well/system Completed |
Evidence:
|
Shut down to standby condition if required Completed |
Evidence:
|
Shut down in an emergency if required Completed |
Evidence:
|
Reset trips and alarms after shutdown Completed |
Evidence:
|
Leave plant in the required condition after shutdown Completed |
Evidence:
|
Isolate and de-isolate an item of, or an entire system
|
|
Isolate system in accordance with procedures Completed |
Evidence:
|
Make system safe as required Completed |
Evidence:
|
Check system is ready to be returned to service Completed |
Evidence:
|
Prepare system for return to service Completed |
Evidence:
|
Finalise shift activities
|
|
Complete shift tasks as appropriate Completed |
Evidence:
|
Ensure identified faults are correctly logged/reported for action Completed |
Evidence:
|
Ensure incomplete tasks are scheduled for follow up Completed |
Evidence:
|
Ensure all logs and reporting are complete and understood Completed |
Evidence:
|